A comprehensive engineering review published in Micro and Nano Systems Letters demonstrates how advanced subtractive microengineering techniques are transforming glass substrates into high-performance platforms for micro-electro-mechanical systems and microfluidic technologies. While silicon has historically dominated semiconductor manufacturing, demanding applications in harsh working environments, high-frequency communications, and biological interfaces increasingly require the distinct physical properties of glass. Silicate glass offers exceptional optical transparency, broad chemical inertness, and superior electrical insulation, effectively eliminating parasitic capacitance and high-frequency substrate losses without requiring complex dielectric insulating layers. However, the amorphous atomic network and inherent brittleness of silicate glass present substantial processing barriers, creating high susceptibility to surface chipping, subsurface cracking, and catastrophic thermal fracture during deep micro-machining. To overcome these material constraints, researchers systematically categorized contemporary glass micro-structuring strategies into five major operational families, mechanical, thermal, chemical or electrochemical, plasma-based dry etching, and multimodal hybrid processes, evaluating how specific material removal mechanisms balance dimensional precision, production throughput, and surface integrity.
In mechanical micro-patterning, micro-grinding provides premier dimensional control by exploiting a fundamental size-effect in which glass transitions from brittle fracture to ductile deformation at nanometric cutting scales. Utilizing miniature pencil-tip diamond grinders or carbide endmills with tool diameters of one millimeter or less operating at rotational speeds between 10,000 and 160,000 revolutions per minute, micro-grinding achieves dimensional accuracies within one micrometer and surface roughness values below twenty nanometers. The cutting interaction progresses dynamically across four distinct regimes: rubbing, ploughing, ductile-mode chip formation, and brittle fracture. When the uncut chip thickness remains below a critical threshold dictated by Young’s modulus, hardness, and fracture toughness, glass is removed through plastic shearing rather than crack propagation. To suppress runout errors and maintain process stability, modern machine platforms require positioning resolutions down to ten nanometers alongside on-machine tool fabrication. Furthermore, diamond tools incorporating micro-grooved or textured passive areas serve as critical reservoirs for cutting fluids and microscopic debris, lowering machining forces and preserving optical surface finishes.
Complementing precision grinding, abrasive jet machining and ultrasonic machining provide specialized mechanical routes for rapid material removal and micro-hole drilling. Abrasive jet machining accelerates fourteen-micrometer aluminum oxide particles through pressurized gas nozzles at velocities between 80 and 290 meters per second. Masked by durable dry film photoresists roughly fifty micrometers thick, localized particle bombardment erodes borosilicate glass at consistent rates of 20 to 25 micrometers per cycle, producing steep-walled cavities without chemical undercutting, though yielding characteristic V-shaped cross-sections and a minimum feature limit of one hundred micrometers. In contrast, ultrasonic machining offers a non-thermal, non-chemical approach that eliminates heat-affected zones and thermal stress fractures. Driving piezoelectric transducers at 20 to 40 kilohertz with oscillation amplitudes of 10 to 50 micrometers, a shaped metallic sonotrode propels an abrasive slurry of boron carbide, silicon carbide, or aluminum oxide against the substrate. This controlled impact erosion produces micro-holes with diameters as fine as ten micrometers and high sidewall verticality.
Thermal manufacturing techniques exploit high-temperature phase transitions and localized absorption to shape glass substrates with minimal mechanical cutting forces. Among formative thermal strategies, glass reflow stands out for creating high-fidelity, void-free three-dimensional architectures and hermetic enclosures. The process begins by etching deep cavities into a silicon wafer using deep reactive ion etching with a protective silicon dioxide hard mask. A borosilicate glass wafer such as Tempax is subsequently bonded to the patterned silicon mold through anodic bonding at 400 degrees Celsius and 800 volts in high vacuum. During subsequent heating in an atmospheric furnace between 750 and 1100 degrees Celsius, the glass softens above its transition temperature, allowing capillary action, surface tension, and gravity to pull molten material into the silicon trenches. Following surface planarization via chemical mechanical polishing, these reflowed glass-in-silicon structures demonstrate exceptional thermal isolation exceeding 100 degrees Celsius differentials alongside electrical through-vias exhibiting measured feed-through resistances as low as ten ohms.
Subtractive thermal methods utilize concentrated electromagnetic energy to achieve localized material removal, as demonstrated by microwave machining and laser ablation. Microwave machining focuses 2.45-gigahertz electromagnetic radiation using a metallic concentrator of tungsten carbide or graphite acting as a near-field antenna. Powered between 10 and 900 watts, intense electric field concentration triggers thermal runaway, melting glass within seconds while plasma recoil and Marangoni stresses expel molten debris. In laser processing, optical direct-writing eliminates the need for masking layers. While continuous or long-pulse carbon dioxide lasers induce severe thermal stresses, micro-cracks, and recast bulges averaging fifteen micrometers in height, ultrafast picosecond and femtosecond lasers deliver pulses between 10^-12 and 10^-15 seconds. Because pulse durations are shorter than the material’s thermal diffusion time, ultrafast lasers enable cold ablation free of heat-affected zones. Submerged liquid-assisted laser processing further dissipates heat, reducing residual tension by up to 136 megapascals and enabling five-micrometer-diameter through-holes with aspect ratios reaching 70.
Wet chemical etching remains a benchmark subtractive technique for glass microfabrication, prized for its operational simplicity and ability to generate smooth, defect-free surfaces. For borosilicate glass substrates like Tempax, etching requires multi-layer masking stacks consisting of a 30-nanometer chromium adhesion layer beneath a 300-nanometer gold protective film that withstands corrosive acid exposure. In diluted hydrofluoric acid baths, Tempax glass dissolves at approximately two micrometers per minute. Because the non-crystalline silica network lacks directional crystal planes, chemical dissolution proceeds isotropically at identical vertical and lateral rates, generating characteristic U-shaped profiles with substantial lateral undercutting. This isotropic mechanism caps achievable aspect ratios below unity, constraining pattern density. Nonetheless, the resulting optical surface smoothness and complete absence of micro-cracks make wet chemical etching an indispensable approach for manufacturing low-loss microfluidic transport channels, acoustic resonators, and high-performance Knudsen vacuum micropumps.
Electrochemical discharge machining merges electrical thermal erosion with accelerated chemical dissolution to machine non-conductive glass workpieces without physical contact. Submerging a tool cathode and counter anode in an alkaline electrolyte like potassium hydroxide triggers electrolysis, generating hydrogen bubbles that coalesce into a thin dielectric gas film encapsulating the tool. When applied potential exceeds a critical transition threshold, high-frequency discharges ignite across the gas layer, generating localized temperatures between 500 and 600 degrees Celsius that melt the glass while highly reactive hydroxyl ions rapidly dissolve softened silica bonds. In drilling through-glass vias, rotating helical tungsten carbide electrodes pump electrolyte into deep cavities, flushing micro-debris and stabilizing sparks to achieve narrow side gaps of 27.2 micrometers at one micrometer per second feed rates. In milling operations, modifying electrode surfaces from smooth to roughened geometries lowers critical breakdown voltages, stabilizes the insulating gas film, and suppresses collateral thermal damage during microchannel fabrication.
To overcome the throughput and precision limits of individual machining processes, researchers developed multimodal hybrid strategies, prominently exemplified by laser and ultrasonic assisted electrochemical discharge machining. This triplex approach couples ultrasonic vibrations above 20 kilohertz to the tool electrode while focusing a low-power 500-milliwatt neodymium-doped yttrium aluminum garnet laser directly into the electrolyte at the tool tip. Ultrasonic acoustic cavitation breaks large, coalesced gas bubbles into smaller, uniform films, enhancing electrolyte circulation and flushing debris from the cutting zone. Concurrently, localized laser heating raises electrolyte temperature, which elevates ionic mobility, lowers activation energy for electrochemical reactions, and decreases the critical spark initiation voltage. Quantitative experimental benchmarks confirm that this triplex configuration achieves a 38.85 percent increase in material removal rate and a 33.47 percent enhancement in machining depth over conventional electrochemical machining. Furthermore, the hybrid method reduces hole circularity errors by 34.48 percent and improves finished surface roughness by 32.24 percent.
Dry plasma etching, specifically reactive ion etching, delivers the directional anisotropy and sub-micron fidelity necessary for creating dense, vertical glass microstructures compatible with semiconductor manufacturing lines. In a capacitively coupled plasma chamber powered by a 13.56-megahertz radio-frequency generator, reactive sulfur hexafluoride gases generate fluorine radicals that chemically react with silica to form volatile silicon tetrafluoride. Simultaneously, energetic ion bombardment sputters non-volatile glass constituents such as sodium oxide and aluminum oxide, driving vertical material removal. To endure the harsh plasma environment, 500-micrometer Tempax glass wafers are masked with a robust 600-nanometer electroplated pure nickel layer patterned over sputtered chromium and gold seed films. While pure sulfur hexafluoride produces tapered pillars with sidewall base angles around 80 degrees, adding oxygen into the gas mixture significantly increases fluorine radical density. This optimized sulfur hexafluoride and oxygen gas chemistry produces vertical glass pillar arrays with aspect ratios reaching 10 to 1 and steep 89-degree sidewall base angles.
These advanced subtractive techniques enable breakthrough microsystem applications across analytical microfluidics and high-performance sensor packaging. In cellular diagnostics, combining sandblasting and hydrofluoric acid etching creates micro-calorimeters with low thermal conductivity glass boundary walls, isolating 950-kilohertz silicon resonators to measure single-cell metabolic heat emissions as small as 5.2 picojoules. Similarly, microchannel mass resonators achieve 2816.9 hertz per nanogram responsivity, enabling single-cell weighing with femtogram resolution, while reactive-ion-etched glass arrays with 200-nanometer silicon windows allow real-time cell observation under one atmosphere of pressure. In micro-electro-mechanical systems, chip-level hermetic packaging using sandblasted glass caps and anodic bonding maintains 0.02-pascal vacuum levels, raising silicon resonator quality factors to 50,600 at 20.24 megahertz. Furthermore, through-glass vias fabricated via electrochemical discharge drilling yield low Kelvin resistances of 256 milliohms across 520-micrometer fused silica, while on-chip Knudsen pumps utilizing 200-nanometer glass-capped channels generate 10 kilopascals of vacuum, boosting cantilever quality factors from 300 to 1150.
Subject of Research: Subtractive microengineering techniques and microsystem applications for glass substrates
Article Title: Microengineering glass substrates: techniques and applications
Article References: Huu, T. D., Tuoi, T. T. K., Singh, R. P., Tran, N. D. K., Nguyen, V. Q., Pham, T. H., Arab, J., Kumar, G., Samat, K. F., Kiat, J. H., Van Toan, N., & Ono, T. (2026). Microengineering glass substrates: techniques and applications. Micro and Nano Systems Letters, 14(1), Article 9. https://doi.org/10.1186/s40486-026-00261-9
Image Credits: AI Generated
DOI: 10.1186/s40486-026-00261-9
Keywords: glass substrates, microengineering, MEMS, microfluidics, micro-grinding, abrasive jet machining, ultrasonic machining, glass reflow, microwave machining, laser ablation, reactive ion etching, electrochemical discharge machining, through-glass vias, borosilicate glass, fused silica, hermetic packaging, anodic bonding
Cite Scienmag News
Eric Holt. (November 18, 2026). Subtractive Microengineering Techniques Overcome Brittleness to Pattern High Precision Glass Devices. Scienmag. https://scienmag.com/subtractive-microengineering-techniques-overcome-brittleness-to-pattern-high-precision-glass-devices/
Eric Holt. "Subtractive Microengineering Techniques Overcome Brittleness to Pattern High Precision Glass Devices." Scienmag, 18 November 2026, https://scienmag.com/subtractive-microengineering-techniques-overcome-brittleness-to-pattern-high-precision-glass-devices/. Accessed 21 November 2026.
Eric Holt. "Subtractive Microengineering Techniques Overcome Brittleness to Pattern High Precision Glass Devices." Scienmag. November 18, 2026. https://scienmag.com/subtractive-microengineering-techniques-overcome-brittleness-to-pattern-high-precision-glass-devices/








