A comprehensive genomic review synthesizing transposable element research across stone fruit trees demonstrates that mobile genetic elements constitute more than half of the nuclear genome in most cultivated and wild Prunus species. Published in the journal Mobile DNA by researchers Attila Hegedűs, Beti Ivanovska, and Júlia Halász, the analysis brings together recent evidence enabled by long-read sequencing technologies and structure-aware annotation software pipelines. The synthesized findings show that repetitive sequences, long categorized as dispensable or non-functional genomic material, serve as primary drivers of structural diversification, regulatory innovation, and economically critical phenotypic traits. Within stone fruit crops including peach, almond, apricot, sweet cherry, sour cherry, and plum, transposon mobilizations and structural integrations have directly modified fruit texture, ripening pigmentation, floral evocation, chilling requirements, and the genetic breakdown of self-incompatibility mechanisms.
Economically, stone fruit trees classified under the genus Prunus within the botanical subfamily Prunoideae represent a major segment of global horticulture, with Food and Agriculture Organization statistics recording an average stone fruit production of 49.8 million tons in 2023. Peach cultivars represent nearly half of this global agricultural volume, plums and sloes account for approximately one quarter, and almonds, apricots, and sweet and sour cherries comprise the remainder. Out of 191 nations cataloged by global agricultural surveys, 102 cultivate at least one Prunus species, yet only one-third cultivate five or six species concurrently, illustrating distinct ecological tolerances, chilling period requirements, and climatic adaptations. Genomic investigations show that transposable element dynamics parallel the phylogenetic branching, mating system changes, historical domestication bottlenecks, and geographical radiations characterizing these temperate fruit crops.
Historically, early draft genome assemblies developed with short-read sequencing platforms substantially underreported repetitive sequence abundance due to methodological constraints. Initial computational annotations estimated total transposable element content at 29.6 percent in peach, 15.88 percent in almond, and 43.8 percent in sweet cherry, because short sequence reads failed to traverse long, tandemly duplicated heterochromatic arrays and collapsed highly uniform repeat families. Modern re-evaluations combining long-read platforms such as Oxford Nanopore and PacBio high-fidelity reads with structure-aware annotation tools, including EDTA and RepeatModeler2, have revised these estimates upward to surpass 50 percent across most analyzed species. Contemporary analyses place genomic repeat content at 54.41 percent in peach, 53.31 percent in almond, and 55.81 percent in sweet cherry. Total element burdens span from approximately 38.7 percent in Prunus fruticosa to 55.8 percent in Prunus avium, while remaining between 52 and 58 percent in related apricot and plum genome assemblies.
Plant transposable elements are categorized into two primary mechanistic classes governed by their transposition intermediate. Class I elements utilize an RNA intermediate and a copy-and-paste transposition mode, encompassing long terminal repeat retrotransposons, long interspersed nuclear elements, short interspersed nuclear elements, and Dictyostelium intermediate repeat sequence-like elements. Within Prunus genomes, long terminal repeat retrotransposons represent the dominant class I fraction, accounting for 25 to 33 percent of total nuclear DNA. Structural subgroups Ty1/copia and Ty3/gypsy diverge primarily by the arrangement of integrase domains within their Pol region and the presence of chromodomains in gypsy integrases, with Ty3/gypsy elements occurring as the most prevalent retrotransposon superfamily across all examined species except Prunus mume. In Prunus mume, Ty3/gypsy and Ty1/copia elements represent 33.3 percent and 18.4 percent of repetitive profiles, respectively, where selective constraint reflects ongoing purifying selection.
Class II transposable elements mobilize without an RNA intermediate, generally deploying a cut-and-paste enzymatic excision mediated by DDE-domain transposases, whereas specialized Helitron superfamilies employ rolling-circle replication. Major plant class II superfamilies detected across Prunus include CACTA, Mutator-like elements, PIF/Harbinger, and Tc1/Mariner. Advanced structure-aware computational pipelines demonstrate that class II elements constitute 25 to 30 percent of total genomic composition in several Prunus genomes, challenging earlier assumptions that cut-and-paste elements operate under strict self-limiting copy constraints. Replicative transposition events, gap-repair mechanisms, and episodic transpositional bursts have allowed DNA transposons to rival retrotransposons in genomic volume, with non-autonomous derivatives such as miniature inverted-repeat transposable elements proliferating near genic regions due to structural signals, terminal inverted repeats, and high cross-mobilization capacity.
Standardized comparative re-annotation across six representative diploid Prunus species indicates that class I retrotransposons constitute the largest element fraction in Prunus salicina and Prunus avium, whereas Prunus dulcis exhibits roughly equal proportions of class I and class II elements, and other taxa show a predominance of class II elements. Molecular dating based on nucleotide substitution rates reveals that prominent retrotransposon expansion pulses occurred predominantly within the past two million years. The highest relative proportion of young retrotransposon insertions appears in the hybrid flowering cherry Prunus yedoensis and in Japanese plum Prunus salicina, whereas almond retains older ancestral copies. In Prunus yedoensis, elevated bursts of recent transposition are linked to interspecific hybridization between Prunus campanulata and Prunus speciosa, an evolutionary process known to disrupt host epigenetic surveillance. In Prunus salicina, a transposition burst dated to roughly 0.2 million years ago coincided with segmental duplications and geographic germplasm exchange.
Comparative analyses of the peach and almond lineages highlight distinct structural trajectories following their divergence approximately 5.88 million years ago. While both species possess overall repeat contents exceeding 53 percent, almond has preserved a larger pool of ancestral long terminal repeat retrotransposons, some of which maintain insertional polymorphisms across germplasm accessions. In contrast, peach experienced a substantial loss of ancestral retrotransposons, a pattern attributed to the evolutionary transition toward self-compatibility and reduced effective population size during historical demographic bottlenecks. Nevertheless, peach genomes display prominent signatures of recent retrotransposition within the last five million years, demonstrating post-divergence amplification pulses that intensified during deliberate agricultural selection and vegetative cultivation.
Specific non-autonomous class II elements exhibit pronounced structural distribution patterns across stone fruit chromosomes. Falling Stones elements, which belong to the Mutator-like superfamily, display distinct chromosomal enrichment, accumulating in the highest copy densities on chromosome 1 and chromosome 6 while occurring at the lowest frequencies on chromosome 5. In the Cerasus cherry group, Falling Stones elements comprise 0.13 to 0.28 percent of the total genome, reaching 14.8 percent of all Mutator-like sequences in Prunus campanulata while representing two to four percent in Prunus avium and Prunus yedoensis. Sequence integrity profiling shows that fragmented copies shorter than 349 base pairs dominate across Cerasus genomes, whereas almond retains a higher proportion of intact elements than peach. Polyploid Prunus genomes carry two- to three-fold higher absolute copy counts, reflecting transpositional proliferation during whole-genome duplication events.
Transposable element insertions within regulatory promoters and gene bodies directly modulate stone fruit phenotypes of high commercial value. In almond, miniature inverted-repeat transposable element insertions located upstream of the cytochrome P450 gene CYP71AN24 induce localized DNA hypermethylation via RNA-directed DNA methylation, downregulating amygdalin biosynthesis and establishing non-bitter, edible kernels that enabled almond domestication. In peach, a transposon insertion upstream of the PpYUC11 auxin biosynthesis gene reduces ethylene evolution to yield stony-hard fruit textures, whereas hypermethylation of an element in the promoter of UDP-ARABINOSE 4-EPIMERASE1 associates with fruit mealiness. Similarly, insertion of the mMoshan element into the promoter of peach chalcone isomerase elevates transcription over 100-fold by introducing MYB transcription factor binding sites, and an LTR retrotransposon insertion in exon 3 of PpeMYB25 eliminates fruit pubescence to produce the glabrous nectarine phenotype.
Disruptions mediated by mobile elements are also central to the evolutionary breakdown of gametophytic self-incompatibility systems in Prunus. The canonical self-incompatibility locus comprises a pistil-expressed S-ribonuclease gene and a pollen-expressed S-haplotype-specific F-box gene. In self-compatible apricot cultivars, a 349-base-pair Falling Stones element insertion within exon 3 of the SFB8 allele produces a truncated protein lacking allele-specific recognition domains, while an identical element inserted into the unlinked ParMDO oxidoreductase modifier gene on chromosome 3 confers self-compatibility in cultivars such as ‘Canino’ and ‘Katy’. Furthermore, insertional polymorphisms generated by these mobile elements provide informative molecular marker systems, including inter-retrotransposon amplified polymorphisms and start-codon targeted markers coupled with transposon-specific primers. High-resolution long-read mapping continues to resolve these repetitive landscapes, demonstrating that mobile elements serve as fundamental architects of gene regulation and trait diversity across stone fruit crops.
Subject of Research: Transposable element composition, structural evolution, and functional impacts on phenotypic traits across Prunus fruit trees
Article Title: Stones in genomic storms: transposable element-driven variation in Prunus fruit trees
Article References: Hegedűs, A., Ivanovska, B., & Halász, J. (2026). Stones in genomic storms: transposable element-driven variation in Prunus fruit trees. Mobile DNA, 17(1), Article 19. https://doi.org/10.1186/s13100-026-00403-1
Image Credits: AI Generated
DOI: 10.1186/s13100-026-00403-1
Keywords: Prunus, transposable elements, retrotransposons, DNA transposons, LTR retrotransposons, MITEs, stone fruit, peach, almond, sweet cherry, apricot, plum, self-incompatibility, molecular markers, plant genomics, gene regulation
Cite Scienmag News
Juliet Wilcox. (November 19, 2026). Mobile DNA Elements Shape Genome Evolution and Fruit Traits Across Prunus Trees. Scienmag. https://scienmag.com/mobile-dna-elements-shape-genome-evolution-and-fruit-traits-across-prunus-trees/
Juliet Wilcox. "Mobile DNA Elements Shape Genome Evolution and Fruit Traits Across Prunus Trees." Scienmag, 19 November 2026, https://scienmag.com/mobile-dna-elements-shape-genome-evolution-and-fruit-traits-across-prunus-trees/. Accessed 22 November 2026.
Juliet Wilcox. "Mobile DNA Elements Shape Genome Evolution and Fruit Traits Across Prunus Trees." Scienmag. November 19, 2026. https://scienmag.com/mobile-dna-elements-shape-genome-evolution-and-fruit-traits-across-prunus-trees/








