Monolithic two-terminal tandem solar cells combining wide-bandgap metal halide perovskites with narrow-bandgap copper indium gallium sulfur selenium absorbers exploit complementary spectral absorption to approach an ideal theoretical Shockley-Queisser efficiency ceiling of approximately 45 percent. Recent experimental developments have propelled these integrated thin-film tandems to an uncertified record power conversion efficiency of 31.09 percent and an externally certified efficiency of 30.57 percent, surpassing previous benchmark thresholds near 30.1 percent. Despite these rapid efficiency gains, microscopic defects localized at surfaces and heterointerfaces remain the foremost physical bottleneck restricting device performance. In these functional boundary zones, non-radiative Shockley-Read-Hall recombination processes deplete photogenerated charge carriers, induce substantial open-circuit voltage deficits between 100 and 150 millivolts per problematic subcell junction, and accelerate operational degradation. Consequently, researchers have shifted away from relying purely on bulk semiconductor properties, focusing instead on the comprehensive defect chemistries, electronic band alignment dynamics, and nanoscale structural engineering strategies that govern carrier transport across the entire multi-layered tandem architecture.
The structural layout of monolithic two-terminal tandems is fundamentally constrained by the fixed electronic polarity of standard copper indium gallium diselenide bottom subcells. Decades of industrial processing optimization have established that these chalcogenide absorbers operate as n-on-p configurations, wherein a p-type base absorber interfaces with an illuminated n-type buffer and window stack. Because both subcells in a two-terminal device share an internal, monolithic recombination junction, this n-type front contact must directly couple to a hole-selective, p-type contact belonging to the overlying perovskite cell. This specific polarity pairing is essential to promote rapid majority-carrier recombination rather than carrier accumulation and voltage loss. Paired with wide-bandgap perovskite top absorbers possessing bandgaps of 1.63 to 1.68 electronvolts, lower-bandgap bottom absorbers tuned between 1.0 and 1.1 electronvolts achieve synergistic solar spectrum harvesting. Relative to silicon-based tandems, the direct bandgap and high absorption coefficient of chalcogenide absorbers permit light harvesting within substantially thinner layers, provide mechanical flexibility compatible with lightweight substrates, and offer lower-temperature monolithic processing pathways that mitigate conventional thermal budget restrictions.
Within the bottom chalcogenide absorber, the conventional concept of bulk defect tolerance breaks down at exposed surfaces and internal boundaries. While neutral copper vacancies function as benign shallow acceptors that stabilize p-type electrical conductivity, deep-level defects such as indium-on-copper and gallium-on-copper antisites create mid-gap electronic states that act as severe non-radiative recombination centers. In wide-bandgap chalcogenide compositions, elevated gallium incorporation alters local defect formation energetics and shifts these trap states deeper into the forbidden gap. Correlative nanoscale characterization using electron beam-induced current, electron backscatter diffraction, transmission Kikuchi diffraction, and high-resolution transmission electron microscopy reveals that defect distributions across the material are spatially heterogeneous. Random grain boundaries and mismatched interfaces exhibit localized recombination hot spots, whereas coherent sigma-three twin boundaries remain electrically neutral. Furthermore, these absorbers exhibit pronounced metastability under illumination and thermal bias, where dynamic reconfigurations of selenium-vacancy and copper-vacancy complexes influence long-term stability and undergo partial self-healing during heat-light soaking recovery treatments.
To counteract localized interfacial losses, alkali-assisted post-deposition treatments have become central to bottom-cell engineering. Introducing light alkali species like sodium during growth promotes grain enlargement and raises bulk hole concentrations through shallow acceptor generation. Conversely, heavier alkali elements including potassium, rubidium, and cesium exhibit a strong tendency to segregate directly at the surface. Spectroscopic studies using X-ray photoelectron spectroscopy confirm that potassium fluoride treatments produce persistent alkali-indium-selenide phases, such as potassium indium diselenide and rubidium indium diselenide, which remain anchored in the near-surface region even after post-treatment chemical washing with dilute ammonia removes loosely bound fluoride salts. These localized phases eliminate surface antisites and vacancies while widening the near-surface bandgap. Simultaneously, operating under copper-poor growth regimes induces the spontaneous formation of ordered vacancy compounds like CuIn3Se5. When carefully controlled to ultrathin dimensions, these ordered vacancy layers induce favorable local electric fields that suppress deep-level defects, though excessive phase segregation creates insulating barriers that impede carrier extraction.
Bandgap grading across the bottom absorber represents another critical design strategy tailored specifically to monolithic tandem integration. Unlike standalone single-junction devices that frequently utilize elevated bandgaps to maximize output voltage, tandem bottom subcells must maintain a narrow bulk bandgap of approximately 1.0 to 1.1 electronvolts to harvest near-infrared photons transmitted through the top subcell. Incorporating a double-graded gallium profile establishes localized bandgap widening at both the front heterointerface and the rear molybdenum contact while retaining a narrow-gap bulk. The front grading creates an electron-reflecting field that improves conduction band offsets with the buffer layer, while rear grading minimizes back-contact recombination. Maintaining these compositional gradients requires strict thermal management during deposition, as excessive growth temperatures cause elemental interdiffusion that flattens grading profiles. Partial copper substitution with silver provides complementary benefits, promoting larger grain growth, planarizing surface topography, regulating alkali diffusion, and suppressing secondary defect phases to yield certified bottom-cell efficiencies exceeding 20 percent.
In the top subcell, wide-bandgap perovskites face intrinsic defect challenges stemming directly from their chemical formulation. Increasing the bromine-to-iodine ratio widens the optical bandgap from 1.5 toward 1.8 electronvolts by shifting the valence band maximum downward through deeper bromine 4p orbitals. However, this increased bromine content reduces dielectric screening, induces microscopic lattice strain, and lowers the formation energy of mobile halide vacancies. Consequently, wide-bandgap compositions suffer from photo-induced halide segregation, wherein continuous illumination drives halide redistribution into low-bandgap, iodide-rich domains and high-bandgap, bromine-rich domains. These segregated iodide-rich clusters act as energetic carrier sinks that funnel photogenerated carriers into non-radiative channels, exacerbating open-circuit voltage deficits. First-principles density functional theory modeling demonstrates that harmful point defects, including iodine-on-bromine antisites, interstitial halides, and lead interstitials, introduce deep-level recombination traps. To suppress these trap states, molecular passivating agents such as 1,2,4-tris(3-thienyl)benzene and pyridine-derivative carboxylic acid isomers coordinate strongly with undercoordinated divalent lead centers, establishing adsorption energies as strong as minus 3.04 electronvolts.
Comprehensive defect mitigation across the perovskite top subcell requires synergistic surface passivations, structural stabilization, and ion migration suppression. Mixed-cation formulations combining formamidinium, cesium, and methylammonium cations optimize the Goldschmidt tolerance factor, reducing structural lattice distortions and increasing the kinetic activation barrier against halide migration. Surface and grain-boundary defects are further neutralized through molecular Lewis bases, carboxylic acids, and ionic salts containing pseudohalides such as thiocyanate, tetrafluoroborate, and formate, which occupy halide vacancies without distorting the crystal lattice. Ultrathin two-dimensional Ruddlesden-Popper perovskite capping layers deposited onto three-dimensional wide-bandgap absorbers establish cascaded energy-level band alignments that accelerate carrier extraction while creating physical barriers against environmental moisture ingress. Additionally, self-assembled monolayers and dipole-inducing molecules, including sulfur-based 3-sulfopropyl acrylate and methacrylate salts, introduce oriented internal electric fields that promote directional carrier separation, passivate dangling bonds, and suppress current-voltage hysteresis under sustained operational bias.
At the charge transport boundaries, chemical interactions and energetic alignments dictate carrier collection efficiencies and non-radiative losses. Inverted p-i-n perovskite architectures require buried hole-transport layers that withstand rough substrates and provide chemical stability without parasitic optical absorption. Inorganic nickel oxide films offer wide optical bandgaps and robust thermal stability, yet native nickel vacancies, mixed nickel oxidation states, and surface hydroxyl species can induce severe interfacial recombination. Combining sputtered nickel oxide with phosphonic-acid self-assembled monolayers provides a conformal hybrid contact that passivates oxide surface defects, tailors work functions, and optimizes energetic band alignment. On the electron-transport side, widely employed metal oxides like tin oxide and titanium dioxide frequently possess oxygen vacancies and polar hydroxyl groups that act as charge traps and accelerate chemical degradation. Drift-diffusion device simulations and experimental characterization establish that suppressing interfacial defect density below 10^10 to 10^11 per square centimeter is essential to eliminate the characteristic 80 millielectronvolt free-energy loss observed at defective transport contacts.
The physical integration of solution-processed perovskite top subcells onto textured bottom subcells presents severe mechanical and morphological obstacles. Chalcogenide absorbers exhibit root-mean-square surface roughness typically spanning 50 to 200 nanometers, which causes uneven precursor solution accumulation, localized dewetting, and microscale electrical shunts. To overcome this limitation, dual-interface carrier transport engineering deposits a sputtered nickel oxide base followed by spin-coated nickel oxide nanoparticles that selectively fill microscopic valleys, reducing substrate roughness from 84.1 to 76.0 nanometers. This planarization eliminates pinholes, suppresses reverse dark leakage current by over three orders of magnitude, and enhances preferred perovskite crystal orientation. Concurrently, interfacial roughness modulates internal mechanical stress within the perovskite layer. Smooth bottom substrates induce substantial tensile stress of 17.52 megapascals, which lowers defect formation energies and accelerates ion migration, whereas corrugated bottom substrates alleviate residual tensile stress down to 2.75 megapascals, providing an 84.3 percent stress reduction that dramatically improves photothermal stability.
Bridging the two subcells requires an intermediate recombination layer that balances high optical transparency, low electrical resistance, and precise energetic matching. Standard indium tin oxide recombination interlayers suffer from free-carrier parasitic absorption in the near-infrared, whereas higher-mobility alternatives such as indium zinc oxide and hydrogen-doped indium oxide achieve optical transmittances above 80 percent at wavelengths beyond 800 nanometers, delivering an additional 1 to 3 milliamperes per square centimeter of photocurrent to the bottom subcell. Ultrathin metallic interlayers, exemplified by a 0.6-nanometer gold film embedded within an aluminum-doped zinc oxide and nickel oxide stack, facilitate efficient carrier recombination while preventing minority-carrier accumulation. However, operational durability remains a critical hurdle, as accelerated laboratory tests at 85 degrees Celsius and 1-sun illumination typically yield T80 lifetimes under 1500 hours, despite unencapsulated storage stability reaching 98.7 percent retention after 6600 hours at room temperature. Outdoor field monitoring in Berlin further confirms that seasonal metastability and interfacial delamination require rigorous encapsulation design.
To elevate monolithic two-terminal tandems beyond their current efficiencies toward practical commercial deployment, researchers have delineated precise performance milestones across materials and fabrication processes. Addressing subcell current matching, currently restricted to approximately 19 to 20 milliamperes per square centimeter, requires compositionally stable top absorbers capable of delivering matched photocurrents between 21 and 22 milliamperes per square centimeter without widening non-radiative voltage deficits beyond 400 millivolts. Developing low-damage deposition techniques, such as atomic layer deposition and low-power radio-frequency sputtering, is necessary to prevent structural damage during transparent conductive oxide deposition, thereby pushing tandem fill factors past 80 percent while restricting interconnect parasitic optical absorption below 0.5 milliamperes per square centimeter. In parallel, meeting standard international reliability protocols demands demonstrated T80 operational stability exceeding 1000 hours under continuous 1-sun illumination at 85 degrees Celsius, alongside rigorous damp-heat resilience. By unifying atomistic surface passivation, mechanical stress relaxation, and lossless intermediate contact engineering, the photovoltaic community aims to bridge the gap between laboratory demonstrations and highly durable, commercially viable thin-film tandems operating beyond 33 percent efficiency.
Subject of Research: Defect mitigation and interface engineering in CIGS/perovskite tandem solar cells
Article Title: Strategies for mitigating surface and interface defects in CIGS/perovskite tandem solar cells: a comprehensive review
Article References: Pawar, P. S., Yadav, R. K., Manjunath, V., Ghule, A. V., Kim, G. Y., & Heo, J. (2026). Strategies for mitigating surface and interface defects in CIGS/perovskite tandem solar cells: a comprehensive review. Nano Convergence, 13(1), Article 43. https://doi.org/10.1186/s40580-026-00576-8
Image Credits: AI Generated
DOI: 10.1186/s40580-026-00576-8
Keywords: photovoltaics, tandem solar cells, perovskite solar cells, CIGS absorbers, interface engineering, surface passivation, defect chemistry, recombination kinetics, open-circuit voltage, bandgap grading, alkali post-deposition treatment, hole transport layer, interconnection layer, halide segregation, carrier lifetime, thin-film solar cells, monolithic integration, optoelectronics
Cite Scienmag News
Denise Maddox. (November 17, 2026). Interface Defect Control Drives Tandem Solar Cells Toward Record Theoretical Limits. Scienmag. https://scienmag.com/interface-defect-control-drives-tandem-solar-cells-toward-record-theoretical-limits/
Denise Maddox. "Interface Defect Control Drives Tandem Solar Cells Toward Record Theoretical Limits." Scienmag, 17 November 2026, https://scienmag.com/interface-defect-control-drives-tandem-solar-cells-toward-record-theoretical-limits/. Accessed 17 November 2026.
Denise Maddox. "Interface Defect Control Drives Tandem Solar Cells Toward Record Theoretical Limits." Scienmag. November 17, 2026. https://scienmag.com/interface-defect-control-drives-tandem-solar-cells-toward-record-theoretical-limits/








