The measurement of the oxidative potential (OP) of atmospheric particulate matter (PM) has emerged as a crucial metric for evaluating the harmful health effects of airborne pollutants. To standardize this critical parameter, a collaborative inter-laboratory comparison involving twenty-six research laboratories worldwide recently conducted a systematic assessment of the ascorbic acid assay, commonly known as OP-AA. By using a common protocol and identical sample sets, researchers identified both the procedural strengths and the methodological bottlenecks that have historically impeded the direct comparison of OP results in atmospheric science literature.
Atmospheric PM exposure is well-established as a deleterious factor for human health, with mechanistic evidence suggesting that inhaled particles alter cellular redox balance by promoting damaging oxidation reactions. The oxidative potential of PM represents an intrinsic capacity of various particle constituents to drive these oxidative processes in pulmonary environments. While biological cellular assays exist, acellular assays like OP-AA—which measures the depletion rate of ascorbic acid—are widely utilized for their simplicity, cost-effectiveness, and suitability for high-throughput automation. However, until this collaborative initiative, the absence of standardized analytical protocols led to significant discrepancies between studies, as labs utilized divergent methods for filter extraction, solution preparation, and mathematical determination of the OP slope, making it nearly impossible to pool data for large-scale epidemiological meta-analyses or to accurately rank the toxicity of different emission sources.
The inter-laboratory study, organized by the Institute of Environmental Geosciences in Grenoble, France, occurred from December 2024 through May 2025. Participants included research groups from Europe, North America, Australia, China, and Hong Kong, who performed the simplified OP-AA SOP on four distinct quartz fiber filter samples (A, B, C, and D) and one chemical reference material (sample EF2, a copper sulfate solution). The simplified protocol involved a standardized extraction in a potassium phosphate buffer at 37 °C for 75 minutes, with measurements conducted at regular intervals to track ascorbic acid depletion via kinetic absorbance monitoring at 265 nanometers. This structural approach was intentionally designed to minimize external variables and focus on the integrity of the entire analytical chain, from the initial extraction of filters to the final mathematical calculations of OP expression per unit mass or volume of air.
Performance evaluation was conducted independently by the European Commission Joint Research Center using z-scores, a statistical measure of laboratory bias relative to assigned consensus values. The results were encouraging: over half of the twenty-six participating laboratories achieved satisfactory z-scores (between −2 and +2) for all four samples tested. No participant exhibited a systemic action-signal across the entire sample set, suggesting that the simplified SOP is fundamentally sound and well-suited for broad, large-scale implementation. Nevertheless, the study highlighted clear areas where procedural rigor is essential. Analysis of variance (ANOVA) revealed that while intra-laboratory repeatability and extraction variance remained relatively low—demonstrating that the assay is inherently stable when managed properly—the variance attributed to systematic differences between laboratories was the primary source of uncertainty, accounting for over 80 percent of the total measured variability.
A major focus of the study was identifying the drivers behind these inter-laboratory discrepancies. Participants reported technical challenges in volumetric operations—such as precise pipetting of reagents and samples—and concerns regarding the sensitivity of the assay to local laboratory conditions, including water quality and temperature fluctuations. The research team specifically analyzed the impact of initial ascorbic acid concentration ([AA]0) at the start of the reaction. Sensitivity analysis demonstrated that participants who diverged from the protocol’s specified concentration range (133 micromolar) were significantly more likely to report unsatisfactory results. Recalculating the OP values using a concentration-based method rather than a traditional calibration curve approach helped shift several of these laboratories into the satisfactory performance category, suggesting that the mathematical framework for calculating OP is as critical as the experimental execution itself.
The study also evaluated the influence of different analytical equipment, specifically comparing cuvette-based spectrophotometers with plate-reader platforms. Both methods showed comparable limits of detection and performance profiles, suggesting that laboratories can choose their instrumentation based on availability without sacrificing the validity of the data, provided that strict calibration and background control measures are maintained. However, the study noted that users of cuvette-based systems occasionally found the manual pipetting steps more cumbersome for complex samples. This reinforces the recommendation that labs should prioritize automation or high-precision mechanical injectors wherever possible to mitigate human error in volumetric handling, which remains a known source of uncertainty in all indirect oxidative potential assays.
Regarding the blank samples (Filter B) and the chemical reference material (Sample EF2), the study provided important diagnostic metrics for procedural quality control. Sample EF2, being a pure chemical solution, served as a baseline indicator of laboratory precision independent of filter extraction issues. The observed variation in EF2 results was significantly lower than that seen in filter sample measurements, confirming that the extraction step itself introduces additional complexity. Interestingly, when participants were asked to perform their own legacy “home” protocols in addition to the SOP, the researchers found that even laboratories with similar technical outputs often achieved them through vastly different methods. This highlights the inherent difficulty in reconciling historical data and underscores why the transition to a unified, community-wide protocol is an essential step for future air quality monitoring.
The research emphasizes the necessity of pre-analytical controls, such as checking the linearity of calibration curves and verifying the slope of negative controls (reagent blanks) before commencing a full analytical series. The study found that filter impurities can potentially impact the background oxidation, and therefore recommended the routine use of calcined quartz fiber filters and the inclusion of at least ten percent field blanks in all monitoring campaigns to account for sampling-induced contamination. Furthermore, environmental stability was a key consideration; the study validated that PM filter oxidative potential remains stable under the controlled refrigeration and transit conditions tested, providing confidence for international research collaborations involving shipped samples.
General recommendations stemming from this exercise include the importance of maintaining a temperature-controlled laboratory environment to prevent the degradation of solutions and the potential drift of kinetic reaction rates.
Ultimately, the inter-laboratory comparison provides a robust foundation for the global standardization of the OP-AA assay. By demonstrating that most methodological variability arises from identifiable, manageable factors such as calculation approaches and volumetric precision rather than inherent instability of the assay, the researchers have provided a clearer path forward for the atmospheric science community. The consensus among the participants was that repeated inter-laboratory exercises are essential for continuous skill enhancement, identifying emergent protocol refinements, and ensuring that air quality monitoring remains consistent and comparable across broader spatial scales. As laboratories adopt these harmonized guidelines, the accuracy and reliability of OP measurements will significantly improve, providing a stronger scientific evidence base for assessing the health impacts of diverse atmospheric particles in the years to come.
Subject of Research: Standardization of the ascorbic acid assay for measuring the oxidative potential of atmospheric particulate matter.
Article Title: Harmonizing measurements of oxidative potential of PM: an interlaboratory comparison of the ascorbic acid assay
Article References: Marsal, A., Cavalli, F., Di Antonio, E., Houdier, S., Dominutti, P., Darfeuil, S., Jaffrezo, J.-L., Sauvage, S., Putaud, J.-P., Mudway, I., Nenes, A., Bougiatioti, A., Mihalopoulos, N., Prévôt, A. S. H., Paraskevopoulou, D., Kušan, A. C., Frka, S., Kroflič, A., Delić, A., … Uzu, G. (2026). Harmonizing measurements of oxidative potential of PM: an interlaboratory comparison of the ascorbic acid assay. Atmospheric Measurement Techniques, 19(22), 7607-7625. https://doi.org/10.5194/amt-19-7607-2026
Image Credits: AI Generated
Keywords: Atmospheric science, Inter-laboratory comparison, Oxidative potential, Particulate matter, Ascorbic acid assay, Standardization, Air quality monitoring, Measurement protocols, Analytical chemistry, Environmental toxicology, Aerosol science, Lab reproducibility, Analytical metrology, PM exposure, Respiratory health, Protocol harmonization, Particle characterization, European Air Quality Directive
Cite Scienmag News
Russell Cooper. (November 19, 2026). Inter-laboratory Study Harmonizes Ascorbic Acid Assay for Atmospheric Particle Oxidative Potential. Scienmag. https://scienmag.com/inter-laboratory-study-harmonizes-ascorbic-acid-assay-for-atmospheric-particle-oxidative-potential/
Russell Cooper. "Inter-laboratory Study Harmonizes Ascorbic Acid Assay for Atmospheric Particle Oxidative Potential." Scienmag, 19 November 2026, https://scienmag.com/inter-laboratory-study-harmonizes-ascorbic-acid-assay-for-atmospheric-particle-oxidative-potential/. Accessed 19 November 2026.
Russell Cooper. "Inter-laboratory Study Harmonizes Ascorbic Acid Assay for Atmospheric Particle Oxidative Potential." Scienmag. November 19, 2026. https://scienmag.com/inter-laboratory-study-harmonizes-ascorbic-acid-assay-for-atmospheric-particle-oxidative-potential/








