Researchers have demonstrated that modifying the flexible iron-based metal-organic framework MIL-88B with a self-assembled organic monolayer of 3-aminopropyltrimethoxysilane significantly enhances its sensitivity and selectivity for acetone detection at room temperature. The functionalized sensor, designated MIL-88B@APTMS, demonstrated an electrical response value of 83 when exposed to 10 parts per million of acetone gas under ambient conditions, while outperforming its unmodified counterpart across low analyte concentrations. At a baseline concentration of 0.1 parts per million, the chemical functionalization boosted the sensor’s response by approximately 61.9 percent relative to pristine MIL-88B. This molecular engineering approach addresses a longstanding limitation in gas-phase chemical sensing, where conventional metal-organic frameworks and solid-state sensors typically demand elevated operating temperatures or expensive precious-metal dopants to distinguish trace ketone vapors from ambient atmospheric interferents.
The development of high-performance room-temperature acetone detectors is driven by both environmental monitoring needs and medical diagnostics, particularly non-invasive health screening. Acetone is a colorless, highly volatile organic compound with a characteristic odor, widely utilized in chemical manufacturing, plastics, and pharmaceutical processing, while also being emitted in diesel vehicle exhaust as a mildly toxic air pollutant. In clinical settings, monitoring acetone in human breath provides a potential pathway for disease detection, including lung cancer and diabetes. Healthy individuals exhale trace amounts of acetone, but patients experiencing diabetic ketoacidosis typically display breath acetone concentrations exceeding 1.8 parts per million. Capturing these concentration thresholds reliably without bulky thermal management hardware requires sensing platforms that integrate rapid response and recovery dynamics, robust chemical selectivity, high sensitivity, and an exceptionally low limit of detection under ambient working conditions.
Porous crystalline metal-organic frameworks have emerged as promising candidates for gas-sensitive devices because of their structural versatility, high internal surface areas, sub-nanometer cavities, tunable pore architectures, and regular coordination channels. In chemiresistive applications, target molecules typically interact with surface functional groups or open coordinatively unsaturated metal sites to modulate overall electrical conductivity. Nonetheless, pristine frameworks frequently suffer from inadequate gas selectivity and high preparation costs. Concurrently, self-assembled organic monolayers offer atomically thin, controllable surfaces with bespoke chemical functionalities capable of recognizing specific analyte molecules, yet their isolated durability remains constrained under challenging environmental conditions. By grafting organic monolayers directly onto the inner and outer surfaces of crystalline framework supports, researchers can combine the gas-enriching porosity of the host framework with the discriminatory binding capabilities of tailored chemical ligands, creating a synergistic hybrid sensing interface.
To fabricate the hybrid material, the research team synthesized pristine MIL-88B through a solvothermal reaction using iron(III) chloride hexahydrate (FeCl3·6H2O, 67.5 milligrams, 0.25 millimoles) and 2-amino-1,4-benzenedicarboxylic acid (NH2-BDC, 18.1 milligrams, 0.1 millimoles). The reactants were dissolved in 10 milliliters of a mixed solvent system consisting of dimethylformamide and methanol. The investigators systematically evaluated the volume ratio of methanol from 0 percent to 80 percent, designating the resulting materials as MIL-88B-X, because alkaline conditions generated by the solvent mixture supply the hydroxyl ions required for framework crystallization. The reaction suspension was stirred at 500 revolutions per minute for one hour at room temperature before being sealed in a 20-milliliter stainless steel autoclave and heated at 110 degrees Celsius for 24 hours. Following natural cooling, the resulting precipitate was isolated by centrifugation at 10,000 revolutions per minute for 10 minutes, washed three times with dimethylformamide and ethanol to eliminate unreacted precursors, and dried under vacuum at 60 degrees Celsius for 12 hours.
Surface modification was achieved through an in situ gas-phase self-assembly procedure carried out inside a sealed vacuum desiccator. Glassware supporting the synthesized MIL-88B crystals was positioned horizontally above an aluminum foil container holding 100 microliters of liquid 3-aminopropyltrimethoxysilane. Vacuum silicone grease sealed the desiccator edges, and air was evacuated with a vacuum pump for 15 minutes to establish a stable low-pressure atmosphere. The assembly was then maintained at a constant temperature of 100 degrees Celsius for several hours, allowing the vapor-phase silane molecules to condense onto the framework surface. The silane terminus of each APTMS molecule reacts with surface hydroxyl groups on MIL-88B to form siloxane (Si–O–Si) bonds through condensation and dehydration, anchoring outward-facing amino groups without collapsing the underlying framework skeleton. To prepare the working sensor, the resulting MIL-88B@APTMS powder was dispersed in isopropanol and drop-coated onto the surface of an interdigitated planar electrode consisting of gold contact fingers supported on an insulating ceramic substrate.
Comprehensive microscopic and spectroscopic examinations confirmed the structural integrity of the synthesized composite. Scanning electron microscopy operating at an accelerating voltage of 15 kilovolts revealed that all pristine MIL-88B samples exhibited uniform hexagonal bipyramidal crystals with average dimensions of 2.6 micrometers in length and 0.8 micrometers in diameter. After functionalization, the MIL-88B@APTMS crystals retained this hexagonal bipyramidal morphology with slightly reduced average dimensions of 2.2 micrometers in length and 0.7 micrometers in diameter. Transmission electron microscopy at 200 kilovolts and selected area electron diffraction displayed clear diffraction spots and an invariant lattice plane spacing of 0.862 nanometers corresponding to the (002) planes. Energy-dispersive X-ray spectroscopy confirmed the homogeneous spatial distribution of carbon, nitrogen, oxygen, iron, and silicon throughout the crystals, validating the presence of the organosilane monolayer. X-ray diffraction patterns utilizing copper K-alpha radiation (wavelength 0.15406 nanometers) matched standard hexagonal unit cell reflections with no impurity phases or peak shifts, while nitrogen adsorption-desorption isotherms measured at 77 Kelvin showed that the specific surface area and average pore diameter remained largely preserved after chemical modification.
Chemical bonding and electronic states were evaluated using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy calibrated against the carbon 1s core level at 284.8 electron volts. Infrared spectra of MIL-88B@APTMS exhibited distinct bending vibration bands between 1,000 and 1,100 inverse centimeters corresponding to the newly formed Si–O–Si network. In iron 2p core-level spectra, characteristic binding energy peaks at 711.2 electron volts and 724.9 electron volts confirmed the presence of iron(II) species, with modified samples displaying a slight positive binding energy shift of 0.3 electron volts due to decreased electron cloud density around the metal centers. Deconvolution of oxygen 1s spectra into lattice oxygen at 530.0 electron volts, defect oxygen at 531.6 electron volts, and adsorbed oxygen at 533.4 electron volts revealed that the proportion of surface oxygen vacancies rose from 37.24 percent in pristine MIL-88B to 45.78 percent in the modified framework. Furthermore, diffuse reflectance ultraviolet-visible spectroscopy and Tauc plot calculations revealed that the optical absorption edge red-shifted from 389.1 nanometers to 398.38 nanometers, narrowing the indirect electronic band gap from 3.18 electron volts to 3.10 electron volts and facilitating charge transfer to adsorbed oxygen species.
Gas-sensing evaluations were performed using a Keithley 4200 semiconductor characterization system coupled to a static gas testing chamber, where calibrated liquid analyte volumes were evaporated into the test volume using a microsyringe. Among the unmodified formulations, MIL-88B prepared with a 10 percent methanol solvent fraction produced the highest baseline sensitivity to acetone, establishing the preferred base material. Testing of functionalization durations indicated that a two-hour vapor modification period produced the optimal sensing response. Dynamic transient measurements conducted at room temperature showed that upon exposure to 10 parts per million of acetone, the sensor current rose rapidly to achieve 90 percent of its equilibrium signal within 58 seconds. Following chamber evacuation, the current returned to its initial baseline level within approximately 60 seconds. The sensor demonstrated a continuous linear increase in current response across a broad analyte range from 1 to 100 parts per million, and repeatability tests over five consecutive exposure-recovery cycles to 10 parts per million of acetone showed negligible degradation in current amplitude.
To evaluate discriminatory capacity, the investigators challenged the MIL-88B@APTMS sensor with 10 parts per million of acetone alongside equal concentrations of common interfering volatile substances, including methanol, ethanol, ammonia, formaldehyde, formic acid, acetic acid, and isopropyl alcohol. While the response value (Ig/Ia) to acetone reached 83, the response values recorded for all competing volatile organic compounds remained below 6.3, providing an acetone selectivity advantage factor ranging from 12 to 49 times. Long-term operational reliability was verified by monitoring the sensor under repeated 10 parts per million acetone exposures across a continuous one-month test period. The baseline current displayed no significant drift, and the sensor retained over 95 percent of its initial response magnitude.
The operational mechanism of the sensor relies on the modulation of surface charge carriers combined with specific chemical binding between target ketone molecules and the grafted monolayer. In ambient air, molecular oxygen adsorbs onto the framework surface and extracts electrons from the conduction band to generate reactive oxygen ions, expanding an electron depletion layer that raises electrical resistance. When reducing acetone vapor enters the chamber, it reacts with adsorbed oxygen species to form carbon dioxide and water while returning 16 electrons per reaction unit to the conduction band, decreasing the depletion barrier and increasing conductivity. The dramatic selectivity enhancement originates from the nucleophilic primary amino groups of the anchored APTMS monolayer, which undergo specific condensation reactions with the partially electropositive carbonyl carbon of acetone molecules to form imine adducts and water.
Subject of Research: Room-temperature selective acetone gas sensing using organic monolayer functionalized metal-organic frameworks
Article Title: Self-assembled organic monolayer functionalized MIL-88B for selective acetone detection at room temperature
Article References: Du, Y., Lian, N., Liu, W., Zhang, Z., Huo, J., Chen, X., Guo, J., Cui, P., Wei, L., Du, Z., & Cheng, G. (2024). Self-assembled organic monolayer functionalized MIL-88B for selective acetone detection at room temperature. Moore and More, 1(1), Article 15. https://doi.org/10.1007/s44275-024-00014-z
Image Credits: AI Generated
DOI: 10.1007/s44275-024-00014-z
Keywords: MIL-88B, APTMS, metal-organic frameworks, acetone gas sensor, room-temperature sensing, gas selectivity, chemiresistive sensors, organosilane functionalization, interdigitated electrodes, oxygen vacancies, volatile organic compounds, breath acetone detection, X-ray photoelectron spectroscopy, imine formation, Keithley 4200, electron depletion layer, vapor deposition
Cite Scienmag News
Russell Cooper. (November 19, 2026). Functionalized Metal Framework Sensor Detects Acetone Selectively at Room Temperature. Scienmag. https://scienmag.com/functionalized-metal-framework-sensor-detects-acetone-selectively-at-room-temperature/
Russell Cooper. "Functionalized Metal Framework Sensor Detects Acetone Selectively at Room Temperature." Scienmag, 19 November 2026, https://scienmag.com/functionalized-metal-framework-sensor-detects-acetone-selectively-at-room-temperature/. Accessed 19 November 2026.
Russell Cooper. "Functionalized Metal Framework Sensor Detects Acetone Selectively at Room Temperature." Scienmag. November 19, 2026. https://scienmag.com/functionalized-metal-framework-sensor-detects-acetone-selectively-at-room-temperature/








