In deep low-permeability reservoirs, extracting gas poses significant engineering challenges due to low gas permeability and complex disturbance environments created by hydraulic fracturing. To investigate these mechanical responses, researchers performed cyclic loading and unloading laboratory tests on slotted coal specimens. The investigation specifically examined different cyclic amplitudes and fracture angles to reveal the resulting deformation response and internal energy evolution under external disturbances.
The laboratory test results indicate that the peak strength and peak strain of the coal specimens decrease as the fracture angle increases. In contrast, peak strain increases when the cyclic amplitude is raised. Overall, the resistance of the coal specimens to mechanical deformation is negatively correlated with both the applied loading amplitude and the fracture angle.
During the initial low-stress loading phase, the modulus of the coal specimens first increases and then gradually stabilizes. As failure approaches, plastic deformation accumulates rapidly within the specimens.
The orientation of the fracture angle strongly influences the ultimate failure mechanism of the coal material. As the fracture angle increases, the observed failure mode changes from shear failure dominant to a tensile-shear mixed failure, and eventually transitions to tensile failure dominant. In particular, fracture angles of 36° and 45° appear more conducive to the overall development and connectivity of coal seam fractures.
Applying a higher cyclic amplitude enhances the structural damage caused by any single cycle to the specimen. This intensification exacerbates the cumulative cyclic effects of fatigue deformation and internal damage within the coal, leading directly to greater energy dissipation and generating more microfractures and fractured structures. These findings offer practical theoretical guidance for methane extraction in deep low-permeability reservoirs.
Subject of Research: Deformation response and energy evolution of slotted coal under cyclic loading
Article Title: Deformation response and energy evolution of slotted coal subjected to cyclic loading
Article References: Sun, X., Xu, K., Zheng, H., Liu, H., Liu, H., & Ma, T. (2026). Deformation response and energy evolution of slotted coal subjected to cyclic loading. PLOS One, 21(11), e0362971. https://doi.org/10.1371/journal.pone.0362971
Image Credits: AI Generated
DOI: 10.1371/journal.pone.0362971
Keywords: slotted coal, cyclic loading, cyclic amplitude, fracture angle, energy evolution, deformation response, peak strength, peak strain, plastic deformation, shear failure, tensile failure, tensile-shear mixed failure, microfractures, energy dissipation, fatigue deformation, methane extraction, low-permeability reservoirs
Cite Scienmag News
Gavin Prescott. (November 20, 2026). Fracture Angles and Cyclic Loading Alter Failure Dynamics in Slotted Coal. Scienmag. https://scienmag.com/fracture-angles-and-cyclic-loading-alter-failure-dynamics-in-slotted-coal/
Gavin Prescott. "Fracture Angles and Cyclic Loading Alter Failure Dynamics in Slotted Coal." Scienmag, 20 November 2026, https://scienmag.com/fracture-angles-and-cyclic-loading-alter-failure-dynamics-in-slotted-coal/. Accessed 20 November 2026.
Gavin Prescott. "Fracture Angles and Cyclic Loading Alter Failure Dynamics in Slotted Coal." Scienmag. November 20, 2026. https://scienmag.com/fracture-angles-and-cyclic-loading-alter-failure-dynamics-in-slotted-coal/








