Researchers have engineered sulfur vacancy defects within the basal plane of monolayer molybdenum disulfide to activate its chemically inert surface, creating an innovative liquid-gated field-effect transistor that achieves a record-high subthreshold current sensitivity of 534.8 percent per pH unit. The development of high-performance two-dimensional biosensors has historically faced major hurdles because pristine transition metal dichalcogenides possess atomically smooth basal planes lacking dangling bonds, preventing spontaneous chemical bonding with ions in aqueous environments. By introducing sulfur vacancies during high-temperature chemical vapor deposition rather than relying on damaging post-growth beam irradiation, the research team converted the crystal lattice into an active sensing channel that directly transduces proton concentration shifts in electrolyte solutions. This direct interfacial configuration eliminates the requirement for conventional insulating gate dielectrics, directly coupling ionic charges to the semiconducting channel through an electrical double layer and offering a viable pathway for high-performance chemical sensing.
Accurate pH monitoring is vital across biological, environmental, and medical applications, where subtle variations in hydrogen ion concentration reflect metabolic activity, physiological health status, and cellular microenvironments. Conventional analytical detection methods rely heavily on commercial glass electrode systems, which remain widespread but present substantial physical size, mechanical fragility, and poor long-term durability in extreme chemical environments. Other sensing approaches, such as optical fibers, metal oxide electrodes, fluorescent markers, and chemical colorimetry, offer valuable capabilities in specialized settings but frequently encounter constraints regarding response time, electrical stability, or device miniaturization. Although silicon-based ion-sensitive field-effect transistors introduced real-time, label-free analytical detection decades ago, their planar architectures lack the large surface-to-volume ratios achievable with emerging nanomaterials. Consequently, developing compact solid-state sensors capable of rapid, reliable, and reversible operation in physiological fluids has become a critical focus within materials science and nanotechnology.
Two-dimensional transition metal dichalcogenides, particularly monolayer molybdenum disulfide, offer remarkable potential for electronic biosensing because of their atomically thin geometry, adjustable semiconductor bandgap, and planar single-crystal lattice amenable to large-scale microelectronic processing. In its thermodynamically stable 2H phase, monolayer molybdenum disulfide exhibits favorable semiconducting behavior and strong chemical stability. Nevertheless, theoretical models and experimental measurements indicate that pristine basal planes lacking dangling bonds remain chemically inert, rendering defect-free films insensitive to ambient hydrogen ions. Previous research explored field-effect transistor sensors utilizing mechanically exfoliated flakes covered with high-permittivity dielectrics, such as aluminum oxide or hafnium oxide, which facilitate protonation and deprotonation at surface hydroxyl sites. While dielectric-coated devices detected ionic changes, mechanical exfoliation cannot support large-scale wafer manufacturing, and insulating overlayers increase fabrication complexity while physically separating ionic charges from the conducting channel.
To establish a scalable and direct sensing mechanism, the investigators implemented a hydrogen-assisted chemical vapor deposition protocol to synthesize defect-engineered monolayer molybdenum disulfide films on single-side polished c-plane sapphire substrates. Before synthesis, the substrates were annealed at 1,100 degrees Celsius for one hour to optimize surface conditions. Growth was performed inside a tube furnace at an elevated temperature of 970 degrees Celsius and a working pressure of 1.5 torr for six minutes. High-purity molybdenum foil positioned in a micro-quartz tube was oxidized to molybdenum trioxide precursors under an argon and oxygen atmosphere with flow rates of 50 and 20 standard cubic centimeters per minute. Subsequent sulfurization occurred upon introducing hydrogen sulfide and molecular hydrogen at 30 and 10 standard cubic centimeters per minute, where hydrogen-mediated chemical trapping incorporated sulfur vacancies while preserving crystalline continuity.
Morphological and spectroscopic characterization verified the crystalline quality, monolayer thickness, and vacancy distribution across the synthesized molybdenum disulfide films. Atomic force microscopy height measurements established a film thickness of approximately 0.7 nanometers, confirming monolayer growth on the sapphire substrate. Raman spectroscopy conducted under a 488-nanometer laser source across twenty randomly chosen positions revealed sharp characteristic peaks at 384 and 403 inverse centimeters, corresponding to the in-plane E2g and out-of-plane A1g vibrational modes of molybdenum disulfide. Raman spatial intensity mapping demonstrated uniform structural continuity across large areas. Transmission electron microscopy confirmed the thermodynamically stable 2H phase, displaying an interlayer lattice spacing of 0.27 nanometers along the (100) crystallographic plane. High-resolution imaging highlighted localized sulfur vacancies corresponding to a calculated defect concentration of roughly 1.8 percent, which aligned with X-ray photoelectron spectroscopy measurements showing a sulfur-to-molybdenum atomic ratio of 1.96.
Device fabrication was carried out by annealing the synthesized molybdenum disulfide films under argon for twelve hours to eliminate surface contaminants. Standard electron-beam lithography defined source and drain contact geometries, followed by electron-beam evaporation of 30 nanometers of titanium and 40 nanometers of gold and subsequent lift-off. To isolate the metal electrodes from the electrolyte and minimize leakage currents during liquid-gated measurements, an insulating polymethyl methacrylate passivation layer with a thickness of 200 nanometers was spun onto the contact leads. This configuration defined an active sensing channel measuring 20 micrometers in length by 40 micrometers in width, exposing the channel directly to the solution. The device architecture utilized the electrolyte solution as the gating environment, the interfacial electrical double layer as the gate dielectric, and an immersed silver/silver chloride reference electrode as the gate terminal.
Electrical characterization was conducted using one-times phosphate-buffered saline, an isotonic electrolyte formulated with sodium, potassium, chloride, and phosphate species to replicate human physiological ionic conditions and osmotic pressure at pH 7.4. Applying a constant source-drain bias of 0.1 volts while sweeping the liquid-gate voltage from negative 0.2 volts to 0.8 volts revealed exceptional device gating across seven evaluated transistors. The devices exhibited a high on-off current ratio of 10^5 and an ultra-steep subthreshold swing of 70 millivolts per decade at room temperature, approaching the theoretical thermodynamic limit. This steep subthreshold swing originates from the high specific capacitance of approximately 30.12 microfarads per square centimeter and the nanoscale physical thickness of roughly 2.4 nanometers provided by the electrical double layer established at the electrolyte-semiconductor interface. Output characteristic curves demonstrated linear current-voltage dependence at low bias that saturated smoothly at higher voltages, confirming ohmic contact between the titanium-gold metallization and the MoS2 channel.
Investigating the influence of electrolyte ionic concentration demonstrated that increasing phosphate-buffered saline concentration from 0.01-times to one-times enhanced interfacial capacitive coupling and channel conductivity. In accordance with the Gouy-Chapman-Stern theoretical model, higher ionic strength weakened electrical screening and reduced the Debye screening length to approximately 2.1 nanometers, producing a substantial increase in electrical double layer capacitance. This capacitive enhancement induced a negative shift in device threshold voltage and maximized on-state drain current in one-times buffer through electrostatic doping. Transconductance analysis revealed that gate modulation efficiency peaked in one-times buffer, reaching an optimal transconductance of 42 microsiemens alongside a steeper transconductance curve. Operational stability evaluations confirmed robust electrical behavior, with transfer characteristics and threshold voltages exhibiting negligible drift after 12, 24, and 36 hours of continuous immersion in buffer, confirming exceptional interfacial resilience under prolonged physiological solution exposure.
The pH sensing performance of the liquid-gated transistors was systematically evaluated in electrolyte solutions prepared by mixing boric, acetic, and phosphoric acids with sodium hydroxide to achieve pH values from 4.6 to 9.5, with ionic strength maintained at 0.15 moles per liter using potassium chloride. Transfer characteristic curves showed that increasing solution pH produced systematic negative threshold voltage shifts and substantial current increases. Evaluating sensitivity across operational regimes revealed an extraordinary current sensitivity of 534.8 percent per pH unit in the subthreshold region, vastly exceeding values recorded in the saturation regime at 40.5 percent per pH unit and the linear regime at 30.6 percent per pH unit. This subthreshold sensitivity also surpassed previously reported benchmarks for graphene field-effect biosensors at 30 percent per pH unit, rhenium disulfide at 126 percent per pH unit, and tungsten diselenide at 100 percent per pH unit.
In addition to exceptional current sensitivity, the devices demonstrated high voltage responsiveness, linear current modulation, and remarkable signal stability during dynamic chemical testing. Linear fitting of threshold voltage shifts across the tested pH range yielded a voltage sensitivity of 44 millivolts per pH unit, operating within the theoretical Nernstian limit of 59.6 millivolts per pH unit at room temperature. Real-time dynamic response measurements carried out at a constant gate bias of 0.3 volts and a drain bias of 0.1 volts revealed that stepping the solution pH downward from 9.5 to 4.6 produced prompt, stable current increases that stabilized rapidly at each tested pH value. Following two consecutive cycling tests between differing pH levels, the transistors exhibited an exceptionally minimal drain current hysteresis width of only 5 nanoamperes, confirming superior measurement repeatability, negligible surface charge trapping, and stable operational reversibility.
To establish the microscopic quantum mechanical mechanism governing proton chemisorption, first-principles density functional theory calculations were conducted using the Vienna Ab-initio Simulation Package with the generalized gradient approximation and Perdew-Burke-Ernzerhof functionals. The theoretical model employed a periodic 4-by-4 monolayer molybdenum disulfide supercell containing 16 molybdenum atoms and 32 sulfur atoms, optimized using conjugate gradient algorithms with a plane-wave cutoff energy of 400 electron volts. Electron density difference mapping showed pronounced charge accumulation around sulfur vacancy sites during hydrogen ion adsorption, accompanied by charge depletion near neighboring molybdenum atoms. Bader charge analysis demonstrated that molybdenum atoms at the defect site transfer approximately 0.61 electronic charges to the adsorbed proton, forming active charge-transfer pathways. Band structure calculations revealed that sulfur vacancies introduce defect states within the bandgap that migrate toward the Fermi level as defect concentration increases. Crucially, thermodynamic calculations indicated that sulfur vacancies reduce the Gibbs free energy of hydrogen adsorption from 2.14 electron volts in pristine MoS2 to negative 0.18 electron volts, proving that sulfur vacancies act as energetically favored chemisorption sites that enable highly stable and sensitive pH detection.
Subject of Research: Defect-engineered molybdenum disulfide field-effect transistors for liquid-gated pH sensing
Article Title: Defect-engineered liquid-gated MoS2 field-effect transistor for pH sensing
Article References: Wu, C., Xie, Y., Luo, Q., Li, T., Gao, Y., Li, H., Shi, J., Zhu, M., & Xiao, M. (2025). Defect-engineered liquid-gated MoS2 field-effect transistor for pH sensing. Moore and More, 2(1), Article 20. https://doi.org/10.1007/s44275-025-00034-3
Image Credits: AI Generated
DOI: 10.1007/s44275-025-00034-3
Keywords: molybdenum disulfide, field-effect transistors, pH sensing, defect engineering, sulfur vacancies, liquid-gated transistors, chemical vapor deposition, subthreshold swing, current sensitivity, electrical double layer, density functional theory, Bader charge analysis, Gibbs free energy, phosphate-buffered saline, two-dimensional materials, transition metal dichalcogenides, transconductance, Nernst limit
Cite Scienmag News
Kathleen Holcomb. (November 18, 2026). Defect-Engineered MoS2 Transistor Sets Record Current Sensitivity for Liquid-Gated pH Sensing. Scienmag. https://scienmag.com/defect-engineered-mos2-transistor-sets-record-current-sensitivity-for-liquid-gated-ph-sensing/
Kathleen Holcomb. "Defect-Engineered MoS2 Transistor Sets Record Current Sensitivity for Liquid-Gated pH Sensing." Scienmag, 18 November 2026, https://scienmag.com/defect-engineered-mos2-transistor-sets-record-current-sensitivity-for-liquid-gated-ph-sensing/. Accessed 18 November 2026.
Kathleen Holcomb. "Defect-Engineered MoS2 Transistor Sets Record Current Sensitivity for Liquid-Gated pH Sensing." Scienmag. November 18, 2026. https://scienmag.com/defect-engineered-mos2-transistor-sets-record-current-sensitivity-for-liquid-gated-ph-sensing/








