Researchers have demonstrated that interfacial ion and electron transport serves as a primary lever for boosting energy density in sulfide-based all-solid-state lithium–sulfur batteries.
To resolve these carrier transport limitations, the investigators developed a cathode design strategy based on tailored sulfur–sulfide and sulfur–carbon interfaces.
The experimental findings demonstrated that mechanochemical energy input enhances active sulfur conversion specifically by promoting partial lithiation at the sulfur–sulfide contact zone. Furthermore, the analysis highlighted that elemental sulfur undergoes surface oxidation during ambient storage conditions, creating a resistive surface phase that severely impedes charge transfer and depresses sulfur utilization.
With both cathode interfaces tailored, the high-loading all-solid-state lithium–sulfur battery cathodes delivered areal capacities reaching near 15 mAh cm−2 while maintaining sulfur utilization above 90 percent. Crucially, these high utilization levels were recorded under moderate stack pressures between 15 and 25 MPa.
The measured electrochemical parameters correspond to projected pouch-cell-level energy densities surpassing 500 Wh kg−1 for sulfide-based all-solid-state lithium–sulfur devices.
When subjected to fast cycling at a 1C rate, the solid-state cells retained 82.1 percent of their capacity over 500 cycles.
In addition to cathode optimizations, stable cycling performance was achieved in full cells employing a pure lithium metal anode operated at a moderate pressure of 10 MPa. This was achieved instead of using the more common lithium–indium alloy. Published in Nature Materials by Yukio Cho, Hongchang Hao, Stacey F. Bent, Jagjit Nanda, and co-authors, the study highlights interface engineering within composite cathodes as an effective paradigm for next-generation solid-state energy storage.
Subject of Research: Interfacial engineering for high-loading all-solid-state lithium–sulfur batteries
Article Title: High-loading all-solid-state lithium–sulfur batteries enabled by tailored sulfur–sulfide and sulfur–carbon interfaces
Article References: Cho, Y., Hao, H., Kim, M., King, M., Zhang, Z., Patil, S., Hwong, J., Liu, H., Zhang, D., Quan, Y., Zheng, X., Tzeng, Y.-K., Shong, B., Watt, J., Abild-Pedersen, F., Chueh, W. C., Cui, Y., Bent, S. F., & Nanda, J. (2026). High-loading all-solid-state lithium–sulfur batteries enabled by tailored sulfur–sulfide and sulfur–carbon interfaces. Nature Materials. https://doi.org/10.1038/s41563-026-02813-1
Image Credits: AI Generated
DOI: 10.1038/s41563-026-02813-1
Keywords: all-solid-state lithium-sulfur batteries, sulfur cathodes, sulfide electrolytes, interfacial transport, partial lithiation, sulfur-sulfide interface, sulfur-carbon interface, high-loading cathodes, areal capacity, sulfur utilization, pouch-cell energy density, mechanochemical processing, surface oxidation, lithium metal anode, Coulombic efficiency, fast cycling
Cite Scienmag News
Denise Maddox. (November 20, 2026). Tailored Cathode Interfaces Enable High-Capacity All-Solid-State Lithium-Sulfur Batteries. Scienmag. https://scienmag.com/tailored-cathode-interfaces-enable-high-capacity-all-solid-state-lithium-sulfur-batteries/
Denise Maddox. "Tailored Cathode Interfaces Enable High-Capacity All-Solid-State Lithium-Sulfur Batteries." Scienmag, 20 November 2026, https://scienmag.com/tailored-cathode-interfaces-enable-high-capacity-all-solid-state-lithium-sulfur-batteries/. Accessed 20 November 2026.
Denise Maddox. "Tailored Cathode Interfaces Enable High-Capacity All-Solid-State Lithium-Sulfur Batteries." Scienmag. November 20, 2026. https://scienmag.com/tailored-cathode-interfaces-enable-high-capacity-all-solid-state-lithium-sulfur-batteries/








