Tag: dynamic recrystallization

Cryogenic-temperature friction stir processing at 600 RPM with liquid nitrogen cooling refined AA6xxx aluminum sheet grains to about 1.6–1.8 micrometers ...

Hot rolling with up to 75% reduction followed by peak aging raised the yield strength of an Mg-Gd-Y-Zr alloy to ...

Hot compression tests and electron backscatter diffraction identified 550–600 °C and strain rates of 0.0001–0.0005 s−1 as a comparatively stable ...

A hot-compression study of a Mg–Gd–Y–Zn–Mn alloy identified a predicted optimum working window of 420–500 °C at approximately 0.01 s−1 ...

A new Journal of Materials Science study maps the hot-working behavior of HIPed PM23 powder metallurgy high-speed steel, identifying an ...

Researchers show that adjusting extrusion temperature between 280 and 360 degrees Celsius tunes the strength, ductility, corrosion resistance and thermal ...

Researchers have shown that axial force and torque signals during friction plug welding can reveal hidden defects and predict layer-by-layer ...

Researchers in China show that a moderate rolling speed of 1024 mm/s gives a biodegradable Mg–2Zn–0.4Ca alloy its finest grains, ...

Researchers at AGH University of Krakow used cyclic extrusion–compression to tune the microstructure of biodegradable zinc–magnesium alloys, achieving an enhanced ...

Researchers at Jilin University report that micro-scale copper and nano-scale silicon carbide particles, combined through ball milling and friction stir ...