A targeted grouting reinforcement strategy guided by the distribution of advanced abutment pressure has reduced roof collapse and coal wall spalling incidents by over 80 percent at an inclined, large mining height working face, according to an investigation combining theoretical modeling, numerical analysis, and underground monitoring. In thick coal seams extracted via comprehensive mechanized mining, the extraction of substantial seam heights dramatically redistributes surrounding rock stresses, driving severe compression in unmined coal ahead of the face.
The comprehensive investigation was conducted at the 7436 working face of Kongzhuang Coal Mine, an underground extraction site characterized by a mining height of 4.15 meters and an average seam burial depth of 937 meters, with total depths ranging from 877 to 997 meters. The working face extends 1,270 meters along its strike and spans 229 meters along the dip direction, with an average coal seam dip angle of 19 degrees within an observed range between 17 and 22 degrees. Geological surveys revealed an environment subject to intense regional static loads, intersected by 24 documented faults, eight of which exhibit vertical displacements exceeding 3 meters. The seam itself contains a localized argillaceous mudstone parting layer, dull coal surfaces marked by pyrite films, visible bright bands, and well-developed endogenous fractures, classifying the deposit as a low-gas environment with a Class II spontaneous combustion tendency. Extraction operates under a retreating single-wing strike longwall layout with comprehensive full-height extraction and total roof caving, leaving a net roadway cross-section 8.0 meters wide and 3.5 meters high.
To evaluate how mining-induced secondary stresses concentrate ahead of the advancing excavation, the team developed an analytical limit equilibrium model treating the coal seam as a continuous geological body governed by the Mohr-Coulomb failure criterion. Deriving differential stress relationships from horizontal and vertical stress equilibrium across an infinitesimal element, the researchers accounted for an internal friction angle of 19.06 degrees, a friction factor of the tangent of that angle, a coal shear strength of 10.57 megapascals, and a Poisson ratio of 0.32. In deep extraction settings, the self-supporting force was formulated from the shear strength and friction angle, while cohesion was taken as zero to capture the weakening effect of preexisting micro-fractures and joints. The theoretical equations established that the vertical advanced abutment pressure peaks at 31.654 megapascals under a stress concentration coefficient of 2.5 and an average rock unit weight of 13.5 kilonewtons per cubic meter. This mathematical solution identified a 5.2-meter-wide plastic failure zone immediately bordering the coal wall, transitioning into an 8.5-meter-wide elastic zone that decays to baseline in-situ stress, establishing a total disturbance range of 13.7 meters.
To assess three-dimensional stress evolution under variable excavation advances, researchers constructed a numerical model in FLAC3D measuring 500 meters by 250 meters horizontally and 262 meters vertically, integrating a coal seam inclined at 19 degrees. The model geometry was discretized into 1,889,600 uniform hexahedral elements, selectively densified across the coal seam and immediate surrounding strata while coarsened in distant overburden layers to optimize computational efficiency without compromising accuracy. Element quality assessments verified aspect ratios below 5, orthogonality above 0.8, and skewness below 0.5, with error-free command checks. Mechanical inputs were derived from laboratory tests on core specimens extracted from five principal roof and floor lithologies, where physical parameter variances remained below 0.001 and coefficients of variation stayed largely under 5 percent, peaking at 5.26 percent. Using the built-in Fish scripting language, large-strain deformation routines and a baseline vertical stress of 23.425 megapascals were applied alongside roller displacement constraints across the lateral and base model boundaries.
Numerical simulation of progressive longwall advance across six consecutive 20-meter cycles revealed substantial stress elevation as the mined-out span expanded from 20 to 120 meters. Immediately following the initial 20-meter cut, compressive stresses along the coal wall perimeter reached approximately 40.89 megapascals, roughly 1.5 times the Virgin in-situ stress field. Upon reaching the full 120-meter advance, intense overburden cantilever action elevated compressive boundary stresses to 73.05 megapascals, representing a 2.6-fold concentration relative to undisturbed conditions. Conversely, tensile stresses ranging from 0 to 0.17 megapascals emerged within the immediate roof and floor due to delayed strata subsidence, matching masonry beam and pressure arch mechanisms that drive floor heave and roof sagging. Across the cross-sectional face, vertical stresses conformed to a distinct saddle-shaped profile, exhibiting elevated concentrations along the roadway ribs compared to the center, with the intake airway experiencing systematically higher loads than the return airway because the 19-degree dip angle caused overburden weight to slide downward toward lower elevations.
The FLAC3D simulation further demonstrated that while the peak stress magnitude increased significantly with excavation advance, the spatial extent of the advanced abutment pressure zone remained remarkably stable. At an advance of 20 meters, stress elevated above in-situ levels across a span extending 14.2 meters ahead of the face, whereas at 120 meters of advance, the disturbance span measured 13.3 meters, stabilizing around an excavation distance of 80 meters. Across all modeled intervals, the numerical plastic zone consistently spanned roughly 5.4 meters from the coal wall, while the adjacent elastic zone extended approximately 8.1 meters before merging into the undisturbed in-situ stress field. The simulated peak stress values systematically exceeded theoretical predictions—reaching 38 megapascals at 20 meters of advance and escalating to 64.27 megapascals at 120 meters—a divergence attributed to the theoretical omission of cohesion and the rigid boundary conditions in the numerical domain, which prevent lateral stress dissipation.
To validate the analytical and numerical projections in actual mining conditions, engineers deployed eight intrinsically safe borehole stress meters in the 7436 working face, split equally between the intake and return airways. Each monitoring station paired a shallow 8-meter borehole with a deep 14-meter borehole drilled directly into the unmined coal ahead of the face. The initial station was installed 50 meters ahead of the longwall setup, with subsequent instrument clusters spaced at 20-meter intervals along the roadways. Continuous 24-hour electronic telemetry tracked stress evolution as the face steadily retreated toward the monitoring arrays. The collected field data exhibited close agreement with numerical forecasts, demonstrating an overall root mean square error of 0.136 and a mean relative error of 0.502 percent. Statistical correlation between simulated and measured values yielded a determination coefficient of 0.727 and a Pearson correlation of 0.968 for peak position, alongside a determination coefficient of 0.945 and a Pearson correlation of 0.999 for peak stress magnitude.
The field borehole sensors confirmed the tripartite spatial zoning of abutment stress ahead of the face, recording the onset of secondary stress concentration between 12 and 13 meters from the unmined coal wall. As extraction advanced closer, vertical compressive stresses climbed rapidly through the elastic zone, reaching peak intensity 5 to 6 meters ahead of the coal wall before plunging steeply across the heavily sheared plastic zone adjacent to the void. Deep boreholes consistently registered higher peak stresses than shallow boreholes due to coal self-weight confinement, with the intake airway recording maximum stresses of 35.2 megapascals in deep holes and 33.5 megapascals in shallow holes, compared to 32.9 megapascals and 32.3 megapascals in the return airway. Because the lateral sensor spacing was 20 meters while the active abutment pressure zone spanned only 12 to 13 meters, remote monitoring points remained quiet within the undisturbed in-situ zone until the advancing longwall face approached within critical range.
Integrating these spatial boundaries, mine engineers developed and executed an advance grouting program that superseded previous reactive treatments. Recognizing that the grouting slurry required two days to attain optimal mechanical curing and that the face advanced at 1.6 to 2.4 meters daily, a dedicated drilling chamber measuring 3 meters by 4 meters by 8 meters was excavated 100 meters ahead of the face. Primary grout holes were drilled from this chamber toward the coal wall to terminate at the coal-rock interface roughly 6 meters ahead of the face, directly intercepting the high-stress boundary between the plastic and elastic zones. Concurrently, auxiliary 6-meter-deep boreholes were drilled directly through the working face coal wall to surpass the 5.2-meter plastic zone boundary, utilizing a staggered pattern spaced every four hydraulic roof supports and repeated on an alternating two-day cycle to ensure uninterrupted structural curing.
Continuous monitoring over two consecutive comparative periods confirmed the operational effectiveness of the targeted pre-reinforcement strategy. Following the implementation of the coordinated advance grouting program, observations collected across January 2024 revealed that roof collapses and coal wall spalling incidents dropped by more than 80 percent, with eight out of 26 recorded production days remaining entirely free of wall or roof failures. The authors noted that while these mechanical findings offer direct operational guidance for steep, thick seams, the quantitative boundaries reflect specific local geology, as the computational model excluded long-term rock creep, fault kinematics, and fracture slip mechanisms that warrant further investigation under varied geological conditions.
Subject of Research: Mining engineering study on advanced abutment pressure distribution and targeted coal seam grouting in large mining height working faces
Article Title: Coal seam grouting location investigation based on advanced abutment pressure distribution in large mining height working faces
Article References: Fan, B., Chang, P., Wan, Z., Zhang, Y., Liu, R., & Du, B. (2026). Coal seam grouting location investigation based on advanced abutment pressure distribution in large mining height working faces. International Journal of Coal Science & Technology, 13(1), Article 104. https://doi.org/10.1007/s40789-026-00944-z
Image Credits: AI Generated
DOI: 10.1007/s40789-026-00944-z
Keywords: advanced abutment pressure, coal seam grouting, large mining height, Kongzhuang Coal Mine, numerical simulation, FLAC3D, limit equilibrium, Mohr-Coulomb criterion, borehole stress gauges, plastic zone, elastic zone, rib spalling, roof collapse, mining engineering, underground geomechanics, thick coal seam mining, rock mechanics
Cite Scienmag News
Denise Maddox. (November 17, 2026). Optimized Advance Coal Grouting Cuts Face Failures by Eighty Percent. Scienmag. https://scienmag.com/optimized-advance-coal-grouting-cuts-face-failures-by-eighty-percent/
Denise Maddox. "Optimized Advance Coal Grouting Cuts Face Failures by Eighty Percent." Scienmag, 17 November 2026, https://scienmag.com/optimized-advance-coal-grouting-cuts-face-failures-by-eighty-percent/. Accessed 17 November 2026.
Denise Maddox. "Optimized Advance Coal Grouting Cuts Face Failures by Eighty Percent." Scienmag. November 17, 2026. https://scienmag.com/optimized-advance-coal-grouting-cuts-face-failures-by-eighty-percent/








