Saturday, November 21, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News Technology and Engineering

Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage

November 21, 2026
in Technology and Engineering
Denise Maddox
By Denise Maddox Scienmag Editorial Profile - Mechanical Engineering
Reading Time: 6 mins read
0
Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage

Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

Surface-modified red mud derived from the industrial Bayer alumina extraction process can significantly accelerate the setting time and early compressive strength of cement mortar when paired with liquid accelerators, but it concurrently exacerbates both autogenous and drying shrinkage over extended curing periods. When combined with an aluminum sulfate-based alkali-free liquid accelerator, a six percent dosage of the modified industrial residue increased one-day compressive strength by 26.9 percent and twenty-eight-day strength by 17.8 percent.

Wet-mix shotcrete serves as an indispensable ground-support technology across underground engineering operations, including tunneling, mining excavations, slope stabilization, and subsurface infrastructure development. In these rapid construction environments, liquid chemical accelerators represent critical admixtures responsible for driving instantaneous stiffening, early setting, and rapid mechanical load resistance to prevent freshly applied concrete from slumping, sagging, or rebounding off overhead rock faces. Contemporary construction engineering categorizes these liquid admixtures based on equivalent alkali content, contrasting traditional sodium aluminate-based alkali accelerators with modern aluminum sulfate-based alkali-free formulations. Sodium aluminate accelerators provide potent early acceleration across varied thermal ranges at lower procurement costs, yet their elevated equivalent alkali content and caustic pH exceeding twelve introduce severe chemical burn hazards for construction crews while triggering undersulfated hydration reactions that undermine long-term durability. Conversely, aluminum sulfate-based accelerators eliminate long-term strength degradation, yet their unstable aluminum ion solubility, vulnerability to cold-weather performance drops, and sluggish early strength evolution frequently require elevated dosages that drive up tunneling expenses without consistently preventing material rebound.

To overcome the operational limitations of conventional liquid accelerators without altering the chemical formulations of the admixtures themselves, the research team investigated whether alumina-rich industrial solid waste could serve as an internal mineral source of reactive aluminum and silicon. Industrial alumina refining generates red mud as an abundant alkaline byproduct, with the dominant Bayer extraction route yielding a residue characterized by high proportions of glassy silicoaluminates, hematite, and anatase. Raw Bayer red mud supplied for the study contained 36.98 percent iron oxide, 23.07 percent aluminum oxide, and 20.46 percent silicon dioxide, exhibiting substantial latent pozzolanic reactivity. To enhance surface activity, the dried red mud was mechanically ball-milled with sodium hydroxide solutions at four hundred revolutions per minute for four hours before being repeatedly washed with deionized water to remove excess free alkali. Following screening across multiple alkaline concentrations, a ten-molar sodium hydroxide treatment was selected to systematically depolymerize the amorphous aluminosilicate glass phases, yielding a high-reactivity modified red mud slurry suitable for internal blending into ordinary Portland cement mixtures.

The experimental campaign systematically evaluated the physical, mechanical, and volumetric responses of cementitious pastes and mortars prepared in strict compliance with standardized testing protocols, specifically GB/T 35159–2017 for shotcrete accelerators, GB/T 17671–2021 for cement mortar strength, and GB/T 29417–2012 for drying shrinkage. Setting behavior was evaluated on fresh cement pastes using a standard automated Vicat apparatus under controlled ambient laboratory conditions of twenty degrees Celsius. Mechanical compressive strength measurements were conducted on standardized forty-millimeter cubic mortar specimens formulated at a water-to-cement ratio of 0.50 with ISO standard sand, deducting the inherent moisture content of the added liquid accelerators to preserve precise liquid-to-solid stoichiometry. Because small-scale mortar cubes allow standardized baseline evaluation without the confounding kinematic variables of field spraying nozzles and air-pressure fluctuations, the resulting mechanical values serve as verified laboratory surrogate indicators of early in-situ shotcrete strength development rather than direct structural field measurements.

Laboratory testing revealed that incorporating modified Bayer red mud markedly compressed both initial and final paste setting intervals across all evaluated accelerator combinations. In paste mixtures accelerated with seven percent aluminum sulfate-based liquid accelerator, raising the modified red mud replacement dosage from zero to nine percent reduced the initial setting time from three minutes and twenty-seven seconds down to one minute and forty-three seconds, representing a 50.2 percent temporal reduction of one hundred and four seconds. Concurrently, final setting was shortened from seven minutes and fifty-seven seconds to five minutes and seven seconds, reflecting a 35.60 percent acceleration. The combination of nine percent modified red mud with seven percent aluminum sulfate achieved a faster final set than a benchmark mixture formulated with an elevated nine percent accelerator dosage without mineral waste. When tested with four percent sodium aluminate accelerator, nine percent red mud lowered initial setting from two minutes and fifty-five seconds to one minute and forty-six seconds, outperforming five percent standalone sodium aluminate paste and confirming that internal waste-derived mineral additions allow engineering teams to decrease liquid accelerator dosages while sustaining rapid stiffening.

Mechanical evaluations revealed distinct divergence in compressive strength evolution between the alkali-free and alkali accelerator systems over time. By twenty-eight days of curing, strength displayed a distinct non-linear optimum: a six percent red mud dosage yielded the highest mechanical capacity, gaining 8.24 megapascals over the accelerator control group to register a 17.8 percent overall enhancement. In stark contrast, mortar accelerated with four percent sodium aluminate exhibited severe strength retrogression at elevated mineral replacement levels. While a three percent red mud addition achieved modest twenty-eight-day gains of 1.40 megapascals, or 4.2 percent, higher dosages of six and nine percent caused severe twenty-eight-day compressive strength drops of 14.3 percent and 22.7 percent, failing the seventy percent strength-retention threshold mandated by national shotcrete standards due to aggressive internal sulfate starvation.

Despite delivering desirable setting acceleration and early mechanical gains, the incorporation of modified Bayer red mud substantially magnified long-term shrinkage deformation across all evaluated mortar formulations. Over a one-hundred-and-eighty-day monitoring timeline, autogenous shrinkage in sealed specimens increased monotonically alongside mineral dosage, with nine percent modified red mud amplifying autogenous deformation by 9.3 percent at twenty-eight days, 16.7 percent at ninety days, and 20.4 percent at one hundred and eighty days in the aluminum sulfate system. The shrinkage penalty proved even more pronounced in mortar accelerated with sodium aluminate, where the same nine percent waste dosage drove autogenous shrinkage increases of 26.5 percent at twenty-eight days and 28.5 percent at one hundred and eighty days. Unsealed drying shrinkage exhibited identical upward trajectories under continuous exposure to twenty degrees Celsius and sixty percent relative humidity; at one hundred and eighty days, nine percent modified red mud increased cumulative drying shrinkage by thirty-seven percent in the aluminum sulfate group and by 34.2 percent in the sodium aluminate group, heightening structural cracking risks.

Continuous monitoring of internal moisture loss demonstrated an unexpected physical discrepancy between evaporative mass change and volumetric shrinkage strain. Gravimetric weighing revealed that adding modified red mud consistently reduced cumulative mortar mass loss over one hundred and eighty days of dry storage. In the seven percent aluminum sulfate mortar, a three percent red mud addition reduced total evaporative mass loss by 14.8 percent relative to the control group, while six and nine percent additions maintained lower mass loss figures of 5.78 percent and 5.72 percent. These contrasting observations confirmed that physical water loss through external evaporation does not govern the drying shrinkage drive in red mud composite mortars, pointing toward deep microstructural transformations within the hardening cementitious paste.

Mercury intrusion porosimetry and continuous hydration temperature tracking uncovered the physical mechanisms responsible for this divergence in moisture dynamics and volumetric deformation. Multi-channel temperature logs showed that introducing modified red mud elevated early exothermic hydration peaks by up to 7.0 degrees Celsius in aluminum sulfate pastes and shortened the induction period, shifting rapid acceleration forward to roughly four hours. Porosimetry tests conducted at twenty-eight days demonstrated that adding optimal dosages of modified red mud reduced total porosity by 6.23 percent in the aluminum sulfate mortar and by 3.99 percent in the sodium aluminate mortar, while eliminating large capillary pores exceeding one hundred nanometers by 20.3 percent and 29.9 percent, respectively. However, the pozzolanic refining action simultaneously expanded the volume of mesopores measuring five to fifty nanometers by 102 percent in the aluminum sulfate mixture and by 305 percent in the sodium aluminate mixture. In accordance with the Laplace-Kelvin thermodynamic relationship, narrowing the meniscus radius within these critical capillary voids dramatically magnified internal capillary tension, creating powerful contracting stresses that drove elevated drying shrinkage despite overall lower evaporative water loss.

Microstructural phase analysis via X-ray diffraction, Fourier-transform infrared spectroscopy, and scanning electron microscopy confirmed that the chemical interactions between modified red mud and liquid accelerators govern phase stability and mechanical integrity. Active alumina from the red mud stimulated rapid ettringite nucleation during early hours, but in sulfate-deficient systems, it provoked premature conversion of acicular ettringite into thin, lamellar monosulfate crystals. In sodium aluminate mixtures devoid of external sulfate, this undersulfated reaction consumed available gypsum, depositing dense monosulfate coatings over unhydrated silicate clinker grains that stifled long-term calcium silicate hydrate polymerization and generated extensive microcracking. In contrast, aluminum sulfate accelerators supplied external sulfate ions that kept the undersulfated conversion controllable, allowing secondary hydration to form dense calcium aluminosilicate hydrate gels that preserved late-age strength.

Subject of Research: Synergistic effects of surface-modified Bayer red mud and liquid accelerators on mortar hydration and shrinkage

Article Title: Synergistic effect of surface-modified red mud and liquid accelerator on setting and early strength of mortar and influence on shrinkage performance: New application of solid waste utilization

Article References: Wan, Z., Zheng, B., Qiu, H., Zhang, Q., Yang, R., Chang, N., & Grabić, J. (2026). Synergistic effect of surface-modified red mud and liquid accelerator on setting and early strength of mortar and influence on shrinkage performance: New application of solid waste utilization. Case Studies in Construction Materials, 25, Article e06742. https://doi.org/10.1016/j.cscm.2026.e06742

Image Credits: AI Generated

DOI: 10.1016/j.cscm.2026.e06742

Keywords: Bayer red mud, liquid accelerators, shotcrete, mortar compressive strength, setting time, autogenous shrinkage, drying shrinkage, pore structure refinement, mercury intrusion porosimetry, aluminum sulfate accelerator, sodium aluminate accelerator, ettringite, monosulfate, undersulfated reaction, capillary tension, solid waste utilization

Cite Scienmag News

Denise Maddox. (November 21, 2026). Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage. Scienmag. https://scienmag.com/modified-red-mud-speeds-mortar-setting-but-elevates-long-term-shrinkage/

Denise Maddox. "Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage." Scienmag, 21 November 2026, https://scienmag.com/modified-red-mud-speeds-mortar-setting-but-elevates-long-term-shrinkage/. Accessed 21 November 2026.

Denise Maddox. "Modified Red Mud Speeds Mortar Setting but Elevates Long-Term Shrinkage." Scienmag. November 21, 2026. https://scienmag.com/modified-red-mud-speeds-mortar-setting-but-elevates-long-term-shrinkage/

Tags: aluminum sulfate acceleratorautogenous shrinkageBayer red mudcapillary tensiondrying shrinkageettringiteliquid acceleratorsmercury intrusion porosimetrymonosulfatemortar compressive strengthpore structure refinementsetting timeshotcretesodium aluminate acceleratorsolid waste utilizationundersulfated reaction
Share26Tweet16
Previous Post

CMIP6 Models Project Prolonged Tropical Atlantic Warming Anomalies Under High Emissions

Next Post

Malawi Humanitarian Officials Support Applying Data Protection Rules to Drone Imagery

Related Posts

Industrial Precast Concrete Gains Major Early Strength from Nanosilica Engineering
Technology and Engineering

Industrial Precast Concrete Gains Major Early Strength from Nanosilica Engineering

November 21, 2026
Microscopic Molybdenum Restores Wild Plastic Avalanches Below One Micrometer Dimensions
Technology and Engineering

Microscopic Molybdenum Restores Wild Plastic Avalanches Below One Micrometer Dimensions

November 21, 2026
Wind-Driven Mechanical Spray System Lowers Solar Panel Temperature by 26.7 Degrees
Technology and Engineering

Wind-Driven Mechanical Spray System Lowers Solar Panel Temperature by 26.7 Degrees

November 21, 2026
Centrality-guided random walks improve classification accuracy for graph tail nodes
Technology and Engineering

Centrality-guided random walks improve classification accuracy for graph tail nodes

November 21, 2026
Domain Adaptive Pretraining Enables Cross-Platform Student Dropout Prediction Under Extreme Label Scarcity
Technology and Engineering

Domain Adaptive Pretraining Enables Cross-Platform Student Dropout Prediction Under Extreme Label Scarcity

November 21, 2026
Attenborough Model Optimizes Sound Absorption in Packed Spherical Noise Control Beds
Technology and Engineering

Attenborough Model Optimizes Sound Absorption in Packed Spherical Noise Control Beds

November 21, 2026
Next Post
Malawi Humanitarian Officials Support Applying Data Protection Rules to Drone Imagery

Malawi Humanitarian Officials Support Applying Data Protection Rules to Drone Imagery

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • Natural Compound Inhibits Potent RE-CmeB Efflux Pump in Multidrug-Resistant Campylobacter
  • Industrial Precast Concrete Gains Major Early Strength from Nanosilica Engineering
  • Arterial Pressure Ratio to Vasopressor Dose Better Predicts Septic Shock Mortality
  • Taiwan Cancer Incidence Remained Stable During Pandemic Despite Disrupted Healthcare Systems

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,151 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading