Tuesday, November 17, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News

Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes

November 17, 2026
in Science News
Faith Mcneil
By Faith Mcneil Scienmag Editorial Profile - Renewable Energy
Reading Time: 6 mins read
0
Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes

Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

Single-crystal lithium nickel cobalt manganese oxide cathodes have emerged as promising candidates for next-generation energy storage applications, offering high energy density and superior structural durability compared to conventional polycrystalline materials. By relying on micron-sized primary particles, these architectures intrinsically present lower specific surface areas and greater mechanical robustness, which effectively limit the formation of microcracks during extended electrochemical cycling. However, the comparatively large dimensions of single-crystal particles inherently lengthen the transport pathways required for lithium-ion diffusion, which can result in sluggish reaction kinetics and restricted rate performance. These kinetic limitations become especially pronounced when batteries are operated under low-temperature conditions, where solid-state ion transport is naturally impeded. Although practical battery systems are regularly required to operate in subzero environments, the mechanistic behavior of single-crystal cathodes under such operating parameters has remained largely unaddressed, particularly regarding the crystallographic imperfections retained inside individual particles.

Microstructural investigations reveal that cathode particles marketed as single crystals rarely constitute ideal monocrystalline entities in a strict crystallographic sense. Instead, individual particles frequently comprise several distinct crystallographic domains, placing them within a quasi-single-crystalline regime characterized by residual internal grain boundaries. Rather than acting as benign structural boundaries, these residual interfaces serve as active initiation sites for intergranular cracking and accelerate electrochemically driven phase deterioration during continuous battery operation. When temperatures drop, the sluggish pace of lithium-ion diffusion severely amplifies transport heterogeneity across these internal domain walls. Despite the acknowledged vulnerability of quasi-single-crystal structures, the explicit correlation between internal boundary characteristics and low-temperature lithium transport dynamics has remained poorly understood, primarily because isolating the influence of domain boundaries requires comparable materials synthesized with identical chemical compositions and particle dimensions.

To investigate this relationship, single-crystal LiNi0.6Co0.1Mn0.3O2, commonly designated as NCM613, was prepared through two distinct industrial manufacturing routes: spray pyrolysis and conventional co-precipitation. In the spray pyrolysis method, all constituent transition metal salts and the lithium source were dissolved together in distilled water before aerosol droplet generation, ensuring an exceptionally uniform distribution of lithium, nickel, cobalt, and manganese throughout each precursor particle. This initial compositional uniformity markedly reduces the interdiffusion length required during thermal calcination, facilitating efficient crystallization into single crystals under milder conditions. Conversely, standard co-precipitation produces transition metal hydroxide precursors devoid of lithium, requiring post-synthesis mechanical blending with a separate lithium compound prior to calcination. During high-temperature heat treatment of co-precipitated material, lithium must diffuse inward from the external particle surfaces, and the pre-existing crystallographic framework of the hydroxide precursor impedes complete single-crystallization, leaving behind numerous residual internal grain boundaries.

Following synthesis, both cathode variants were subjected to sequential surface modification using cobalt- and tungsten-containing precursors to enhance interfacial conductivity and suppress parasitic side reactions at high voltages. Advanced structural characterization confirmed that both the spray pyrolysis cathode, denoted as SP-NCM613, and the co-precipitation counterpart, denoted as CP-NCM613, possessed nearly identical bulk crystallographic properties. Both materials exhibited a well-defined layered structure belonging to the R3̅m space group, comparable lattice parameters, and closely matched Li/Ni cation mixing ratios, with SP-NCM613 demonstrating a slightly higher I(003)/I(104) intensity ratio indicative of an ordered layered lattice. Scanning electron microscopy and laser diffraction measurements established that both cathode batches consisted of micron-sized particles with closely matched median diameters of approximately 4.31 micrometers and comparable specific surface areas. When fabricated into dense electrodes through ion-milling, the materials yielded comparable electrode densities of 3.32 and 3.23 grams per cubic centimeter and electrode porosities of 19.6 percent and 21.6 percent, respectively, verifying that bulk morphology and packing density were sufficiently matched to eliminate extrinsic geometric variables.

Despite their shared bulk properties, electron backscatter diffraction orientation mapping and transmission electron microscopy revealed profound discrepancies in the internal grain structures of the two cathodes. Detailed cross-sectional inverse pole figure and band contrast analyses demonstrated that SP-NCM613 developed a coherent, highly integrated internal structure with very few interior domain divisions. In contrast, CP-NCM613 contained numerous internal subgrains demarcated by extensive network boundaries within individual particles. Quantitative grain boundary character classification indicated that while both materials maintained comparable length densities of low-angle grain boundaries, defined by misorientation angles between 2 and 10 degrees, CP-NCM613 exhibited a significantly higher population and length density of high-angle grain boundaries, which possess misorientations exceeding 10 degrees. These crystallographic findings proved that the spray pyrolysis technique effectively suppressed crystallographically discontinuous high-angle interfaces, yielding particles with an internally coherent crystallographic lattice that substantially diverged from the domain-fragmented internal framework of the co-precipitation material.

Electrochemical evaluations were performed in half cells under demanding commercial conditions, employing high active mass loadings of 12 milligrams per square centimeter and an upper cutoff voltage of 4.4 volts. At an ambient temperature of 25 degrees Celsius, both materials exhibited comparable initial electrochemical metrics at a 0.1 C rate, with SP-NCM613 delivering a discharge capacity of 193.5 milliampere-hours per gram with an initial Coulombic efficiency of 89.6 percent, while CP-NCM613 achieved 191.0 milliampere-hours per gram and 87.6 percent efficiency. Extended cycling at a 1.0 C rate across 200 cycles demonstrated robust capacity retention in both systems, maintaining 94.8 percent for SP-NCM613 and 95.2 percent for CP-NCM613. However, when cells were subjected to testing at minus 10 degrees Celsius, a stark kinetic divergence emerged between the two architectures. Although both cathodes exhibited initial voltage overshoot indicative of sluggish low-temperature activation, CP-NCM613 suffered from severe polarization, marked voltage shifts in differential capacity profiles, and steep capacity decay at discharge rates exceeding 0.3 C. In contrast, SP-NCM613 delivered 127 milliampere-hours per gram at 0.3 C under minus 10 degrees Celsius and preserved 92.0 percent of its capacity after 100 cycles.

To deconvolve the specific kinetic phenomena responsible for this low-temperature divergence, the researchers conducted in situ electrochemical impedance spectroscopy combined with distribution of relaxation times analysis during cycling. Across the measured spectra, distinct relaxation processes were categorized, ranging from interparticle contact resistance and surface film transport to interfacial charge-transfer resistance and solid-state lithium diffusion within cathode particles. At room temperature, both cathodes exhibited stable kinetic signatures with manageable increases in low-frequency diffusion resistance near 4.4 volts during charging, reflecting lattice contraction along the c-axis during the H2 to H3 phase transformation. At minus 10 degrees Celsius, however, CP-NCM613 developed substantially elevated impedance that prevented stable measurement below 4.1 volts during initial charging. Distribution of relaxation times profiling revealed that while surface film resistances evolved similarly between the two cathodes, the lowest-frequency relaxation process governing solid-state lithium transport diverged drastically, showing that hindered lithium diffusion within individual particles constituted the dominant driver of the observed low-temperature performance disparity.

The microscopic consequences of this hindered lithium transport were examined through ex situ atomic force microscopy, scanning electron microscopy, and post-cycling electron backscatter diffraction. Because steep lithium concentration gradients generate localized mechanical stress during charging, primary particles develop surface gliding features. At 25 degrees Celsius, both materials exhibited reversible surface gliding that relaxed almost entirely upon subsequent discharge to 3.0 volts. At minus 10 degrees Celsius, however, atomic force microscopy showed that CP-NCM613 retained prominent, irreversible surface steps and gliding lines after discharging, whereas SP-NCM613 demonstrated substantial morphological recovery. Furthermore, grain orientation spread measurements on discharged electrodes revealed an average orientation spread of 1.30 degrees for CP-NCM613 compared to 0.96 degrees for SP-NCM613. Grain reference orientation deviation maps illustrated that while local lattice distortion was confined strictly to near-surface regions in SP-NCM613, CP-NCM613 experienced pronounced crystallographic distortions both at the outer surface and along internal high-angle grain boundaries, directly proving that residual boundary networks act as focal points for localized stress accumulation.

To eliminate kinetic degradation artifacts and measure intrinsic transport parameters, the authors implemented a temperature-controlled impedance testing protocol preceded by an initial low-rate formation cycle at room temperature. Following cell voltage stabilization at 3.65 volts, impedance spectra recorded across varied temperatures yielded lithium-ion diffusion coefficients and Arrhenius-derived diffusion activation energies. At this lower state of charge, both materials exhibited similar diffusion activation energies, indicating that grain boundary density exerts minimal kinetic influence when lithium channels remain broad and unconstrained. However, when cells were charged to 4.4 volts and stabilized, a dramatic divergence in activation energy emerged. As cells transitioned into the highly delithiated state, the diffusion activation energy of CP-NCM613 rose sharply, whereas SP-NCM613 maintained a comparatively low activation energy. Corresponding distribution of relaxation times spectra at minus 10 degrees Celsius confirmed that while interfacial charge-transfer resistance remained virtually identical between the two samples, solid-state diffusion resistance was substantially amplified in the material containing abundant high-angle grain boundaries.

These experimental findings demonstrate that residual internal grain boundaries represent a decisive limiting factor for single-crystal cathode performance under low-temperature, high-voltage conditions. When high-angle grain boundary networks interrupt the continuous crystalline framework of cathode particles, lithium diffusion pathways become disjointed, leading to severe localized concentration gradients and heterogeneous strain accumulation that promote particle fracture and capacity loss during subzero cycling. By establishing uniform precursor mixing through spray pyrolysis, manufacturers can suppress high-angle domain boundaries and produce single-crystal architectures with coherent internal transport channels capable of withstanding severe kinetic constraints. While full-cell evaluations utilizing commercial graphite anodes confirmed that low-temperature anode kinetics must also be improved to realize nominal system capacity, these mechanistic insights provide clear structural guidelines for engineering resilient single-crystal cathode materials for cold-weather transportation and demanding energy storage systems.

Subject of Research: Low-temperature lithium diffusion kinetics and structural degradation in single-crystal NCM cathodes

Article Title: Synthesis‐Dependent Grain Boundary Density Governs Low‐Temperature Lithium Diffusion in Single‐Crystal NCM Cathodes

Article References: Kim, Y. B., Lee, J., Park, J., Chae, S., Kim, D., Han, G., Song, H., Jang, J., Choi, J., Jeong, S. M., Kang, Y. C., & Park, G. D. (2026). Synthesis‐Dependent Grain Boundary Density Governs Low‐Temperature Lithium Diffusion in Single‐Crystal NCM Cathodes. Advanced Science, 13(64), Article e77448. https://doi.org/10.1002/advs.77448

Image Credits: AI Generated

DOI: 10.1002/advs.77448

Keywords: single-crystal cathode, lithium-ion batteries, NCM613, spray pyrolysis, co-precipitation, grain boundaries, low-temperature performance, lithium diffusion, distribution of relaxation times, electrochemical impedance spectroscopy, high-angle grain boundaries, solid-state transport, particle cracking, surface gliding, nickel-rich cathodes, energy storage, electrode kinetics

Cite Scienmag News

Faith Mcneil. (November 17, 2026). Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes. Scienmag. https://scienmag.com/grain-boundary-density-controls-low-temperature-lithium-diffusion-in-single-crystal-cathodes/

Faith Mcneil. "Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes." Scienmag, 17 November 2026, https://scienmag.com/grain-boundary-density-controls-low-temperature-lithium-diffusion-in-single-crystal-cathodes/. Accessed 17 November 2026.

Faith Mcneil. "Grain Boundary Density Controls Low-Temperature Lithium Diffusion in Single-Crystal Cathodes." Scienmag. November 17, 2026. https://scienmag.com/grain-boundary-density-controls-low-temperature-lithium-diffusion-in-single-crystal-cathodes/

Tags: co-precipitationdistribution of relaxation timeselectrochemical impedance spectroscopyelectrode kineticsenergy storagegrain boundarieshigh-angle grain boundarieslithium diffusionlithium-ion batterieslow-temperature performanceNCM613nickel-rich cathodesparticle crackingsingle-crystal cathodesolid-state transportspray pyrolysissurface gliding
Share26Tweet16
Previous Post

Machine Learning Diagnostic Tools for Infections Lack Universal Performance Standards

Next Post

Open-Source Tool Automates Mapping UNESCO Climate Guidance to National Curriculum Standards

Related Posts

Online Training Reduces Police Misconceptions About Incidental Fentanyl Exposure Risks
Medicine

Online Training Reduces Police Misconceptions About Incidental Fentanyl Exposure Risks

November 17, 2026
Experimental Toddler Health Instrument Shows Construct Validity in Pediatric Functional Constipation
Medicine

Experimental Toddler Health Instrument Shows Construct Validity in Pediatric Functional Constipation

November 17, 2026
Survey Reveals Lack of Parental Awareness Regarding Sibling Visitation Policies in PICUs
Medicine

Survey Reveals Lack of Parental Awareness Regarding Sibling Visitation Policies in PICUs

November 17, 2026
Review Details How Circulating Tumor Cells Survive Bloodstream Stresses to Drive Metastasis
Medicine

Review Details How Circulating Tumor Cells Survive Bloodstream Stresses to Drive Metastasis

November 17, 2026
Human Bone-Cartilage Interface Organoid Recapitulates Key Cellular Interactions in Rheumatoid Arthritis
Science News

Human Bone-Cartilage Interface Organoid Recapitulates Key Cellular Interactions in Rheumatoid Arthritis

November 17, 2026
Laparoscopic Colectomy Cuts Surgical Site Infection Risk in Obese Adults
Medicine

Laparoscopic Colectomy Cuts Surgical Site Infection Risk in Obese Adults

November 17, 2026
Next Post
Open-Source Tool Automates Mapping UNESCO Climate Guidance to National Curriculum Standards

Open-Source Tool Automates Mapping UNESCO Climate Guidance to National Curriculum Standards

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • Online Training Reduces Police Misconceptions About Incidental Fentanyl Exposure Risks
  • Experimental Toddler Health Instrument Shows Construct Validity in Pediatric Functional Constipation
  • Survey Reveals Lack of Parental Awareness Regarding Sibling Visitation Policies in PICUs
  • Review Details How Circulating Tumor Cells Survive Bloodstream Stresses to Drive Metastasis

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,151 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading