In an exploratory computational analysis of composite materials for external prosthesis covers, Record 7 ranked first across five compromise settings and twelve individual weight perturbations within a decision-support framework. The study examined fifteen tabulated tribological records of carbon and carbon/glass epoxy configurations to evaluate competing wear, friction, and thermal responses, identifying Record 7 as the leading candidate under specified baseline conditions. However, the authors determined that these outcomes support only conditional screening rather than a confirmed optimum material for clinical use.
The evaluated composites relied on a fabrication route defined by hand lay-up and ambient-temperature curing. Researchers analyzed the fifteen tabulated tribological records to address the mathematical requirements of a spherical fuzzy decision framework intended for potential external prosthesis covers.
Tribological evaluations across the fifteen records incorporated operational parameters that included nominal loads of 400 to 800 N, rotational speeds of 2 to 6 rev/min, and sliding distances of 20 to 60 m. Across these varying conditions, the measured wear response spanned from 0.088 to 0.206 mm/h, while recorded mass loss ranged between 2.058 and 3.528 mg.
At a nominal load of 400 N and a sliding distance of 20 m, the GG-coded record achieved a 16.95 percent lower wear response than the CC-coded record at a rotational speed of 6 rev/min. Conversely, when tested at 2 rev/min under the same load and distance, the GG-coded configuration exhibited twice the wear response of the CC-coded record.
To process these complex interactions, the investigation analyzed displayed fuzzy entries and recalculated triangular ratings directly from their stated counts. In addition to examining the spherical fuzzy framework, the authors established a separate baseline model using the VIKOR decision-making method with equal weighting applied across the six numerical responses.
Under this equal-weight VIKOR baseline, Record 7 demonstrated consistent stability by maintaining the first-place rank across five separate compromise settings and twelve individual weight perturbations. This top ranking persisted even after excluding both friction-related columns from the calculation matrix. Furthermore, when the compromise parameter was set to v = 1, Record 7 and Record 3 together formed the designated compromise set.
Despite these mathematical rankings, the researchers emphasized multiple limitations that constrain practical interpretation, including an observed load–friction inconsistency, incomplete criterion mapping, and rank deficiency in the specified response-surface design. Consequently, the findings represent conditional screening under explicit mathematical decision assumptions rather than a validated material optimum. The data do not establish predictive model validity, measured tensile or adhesive strengths, or medical qualification for prosthetic components.
Subject of Research: Fuzzy decision-support screening of carbon and glass fiber composites for external prosthesis covers
Article Title: Exploratory Fuzzy Decision Support for Tribological Screening of Carbon and Glass Fiber Composites for Potential External Prosthesis Covers
Article References: Sivam, S. P. S. S., Kesavan, S., & Ammarullah, M. I. (2026). Exploratory Fuzzy Decision Support for Tribological Screening of Carbon and Glass Fiber Composites for Potential External Prosthesis Covers. International Journal of Computational Intelligence Systems. https://doi.org/10.1007/s44196-026-01709-x
Image Credits: AI Generated
DOI: 10.1007/s44196-026-01709-x
Keywords: carbon fiber composites, glass fiber composites, external prosthesis covers, tribological screening, spherical fuzzy decision framework, VIKOR method, wear response, mass loss, hand lay-up, ambient-temperature curing, load-friction inconsistency, response-surface design, sensitivity analysis, triangular ratings, sliding distance, rotational speed
Cite Scienmag News
Denise Maddox. (November 21, 2026). Fuzzy Screening Ranks Composite Record First for Potential External Prosthesis Covers. Scienmag. https://scienmag.com/fuzzy-screening-ranks-composite-record-first-for-potential-external-prosthesis-covers/
Denise Maddox. "Fuzzy Screening Ranks Composite Record First for Potential External Prosthesis Covers." Scienmag, 21 November 2026, https://scienmag.com/fuzzy-screening-ranks-composite-record-first-for-potential-external-prosthesis-covers/. Accessed 21 November 2026.
Denise Maddox. "Fuzzy Screening Ranks Composite Record First for Potential External Prosthesis Covers." Scienmag. November 21, 2026. https://scienmag.com/fuzzy-screening-ranks-composite-record-first-for-potential-external-prosthesis-covers/








