Laboratory study reports vacuum-deposited Ni–Cr alloy foam properties
A laboratory study prepared porous Ni–Cr alloy foam by vacuum-depositing chromium onto nickel foam and measured its composition, compressive strength...
Neil Sanderson is a Scienmag editorial specialist profile for Materials Characterization coverage.
A laboratory study prepared porous Ni–Cr alloy foam by vacuum-depositing chromium onto nickel foam and measured its composition, compressive strength...
A laboratory study found that copper nanoparticles in a carbazole copolymer produced smaller threshold-voltage intervals, greater three-state current contrast and...
A study of Ti–5Cu alloy sheets found that solution treatment at 860 °C for 1,800 s produced the best overall...
Polymer scientists have been quietly flooding the open-data ecosystem. Between 2020 and 2025, more than 53,000 openly deposited polymer datasets...
A resistance-graded graphene/polymer fabric sensor maintained a quasi-linear response from 0.1 to 200 kPa and showed higher fitted sensitivity underwater...
A nano-TiO2/oxidized starch composite film optimized by response surface methodology suppressed browning and delayed senescence in postharvest Lanzhou lily bulbs...
A comparative study shows that cryo-rolling and annealing give the Al0.3CoCr1.3FeMnNi0.7 dual-phase high-entropy alloy a yield strength near 786 MPa...
Flexible polyvinyl alcohol films containing up to 50 weight percent boric acid reduced the thermal neutron half value layer from...
A new nanomaterial called TPTN reduces uveitis inflammation by suppressing microglial activation and inhibiting the JAK2-STAT1 signaling pathway in mouse...
Thin films of fluorescein dye and graphene nanosheets embedded in polyvinyl alcohol showed higher thermal conductivity, faster light response, and...
© 2026 Scienmag - Science Magazine
© 2026 Scienmag - Science Magazine