Saturday, November 21, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News

Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters

November 21, 2026
in Science News
Denise Maddox
By Denise Maddox Scienmag Editorial Profile - Mechanical Engineering
Reading Time: 6 mins read
0
Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters

Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

In an investigation published in the Journal of Electrical Systems and Information Technology, researchers developed and evaluated an advanced backstepping double integral sliding mode control scheme optimized by particle swarm optimization to govern a bidirectional buck/boost direct-current converter. The engineering team, led by Julius Derghe Cham, Francis Lénine Djanna Koffi, Gabriel Ekemb, Ngoune Jean-Paul, and Alexandre Teplaira Boum, demonstrated through comprehensive numerical simulations that combining backstepping synthesis with double integral sliding mode action substantially improves dynamic responsiveness. The proposed architecture systematically resolves persistent design conflicts inherent in traditional power electronics regulation, shortening settling and rise times while damping high-frequency switching oscillations under variable operating states.

Modern power systems increasingly depend on bidirectional direct-current converters to establish flexible interfaces among energy sources, battery storage units, and diverse electrical loads. These conversion circuits operate as critical infrastructure within microgrids, distributed generation networks, and electric vehicles, where stabilizing DC bus voltages remains paramount for system reliability. Despite their utility, bidirectional buck/boost topologies exhibit severe nonlinear behaviors alongside time-varying parameter uncertainties, sudden load fluctuations, and input voltage variations. Conventional linear control systems, including proportional-integral and proportional-integral-derivative loops, are widely utilized because of their design simplicity, yet they frequently fail to provide sufficient robustness against abrupt external disturbances and structural parameter drift.

To overcome the performance constraints of linear regulation, control engineers often deploy nonlinear control schemes such as sliding mode control and backstepping control. Sliding mode strategies offer strong resilience against external disturbances by forcing state trajectories onto a predetermined sliding manifold; however, discontinuous signum switching functions inherently generate chattering, which degrades physical components and harms energy conversion efficiency. Conversely, recursive backstepping techniques enforce asymptotic stability through systematic Lyapunov-based derivation, but they often yield slower dynamic convergence rates. Enhancements such as integral sliding mode control and double integral sliding mode control successfully diminish steady-state voltage errors, yet manually tuning the interrelated gains across combined hybrid architectures presents significant mathematical and practical challenges.

Addressing these tuning and chattering limitations, the research team synthesized a hybrid controller designated as backstepping double integral sliding mode control optimized through particle swarm optimization, abbreviated as BDISMCPSO. The mathematical foundation of this strategy integrates the double integral action of sliding mode control directly into the recursive steps of a backstepping framework. To eliminate destructive chattering while guaranteeing asymptotic convergence within a Lyapunov-stable boundary, the authors replaced the traditional discontinuous signum switching term with a smooth hyperbolic tangent function. Offline particle swarm optimization was then implemented to compute optimal values for the five primary controller parameters, specifically the sliding surface gains and reaching law coefficients, minimizing operational error without demanding tedious manual trial-and-error tuning.

The physical converter topology evaluated in the study was modeled around a half-bridge bidirectional buck/boost circuit designed for battery charging, where the battery is represented by an equivalent internal resistance. In this continuous conduction model, complementary pulse-width modulation signals operate two semiconductor switches to step down voltage from a primary DC bus. The dynamic state-space equations governing the system capture the inductive filter current and the capacitive filter voltage across both open and closed switching configurations. While initial mathematical modeling excluded parasitic elements to derive equivalent control laws and closed-loop Lyapunov stability proofs, the numerical validation explicitly incorporated circuit parasitic resistances to reflect practical converter behavior accurately.

To rigorously benchmark performance, the authors modeled six distinct nonlinear controllers in MATLAB and Simulink under identical converter conditions: conventional sliding mode control, integral sliding mode control, backstepping control, double integral sliding mode control, unoptimized backstepping double integral sliding mode control, and the PSO-tuned BDISMCPSO architecture. The simulation environment operated with a fixed-step sampling time of one microsecond, translating to a sampling frequency of one megahertz. This frequency verified compliance with the Nyquist criterion by exceeding the one-kilohertz dominant closed-loop control bandwidth by a factor of one thousand and surpassing the ten-kilohertz power electronic switching frequency by a factor of one hundred, thereby capturing critical high-frequency transient dynamics without numerical aliasing.

The comparative dynamic performance was initially tested by introducing sequential step changes to the output reference voltage while holding the input voltage constant. Over the simulation interval, the desired voltage stepped incrementally from 8 volts to 10 volts, reached 12 volts, and subsequently returned downward to 10 volts and 8 volts. All six nonlinear schemes successfully tracked the reference trajectory, but the PSO-optimized controller restored the output voltage to target levels far more rapidly than its conventional counterparts. This accelerated trajectory tracking confirmed the benefits of the double integral action in expediting transient recovery, although the faster dynamic response was accompanied by minor transient voltage overshoot during rapid reference transitions.

In a second testing scenario focusing on abrupt load disturbances, the controllers faced severe impedance shifts while input and reference voltages remained fixed at 24 volts and 12 volts, respectively. When the load resistance dropped instantaneously from 10 ohms to 5 ohms, the BDISMCPSO system settled within 2.0 milliseconds and exhibited a transient undershoot of 35.78 percent, outperforming the backstepping controller which recorded an undershoot of 36.65 percent and required 2.6 milliseconds to settle, as well as the integral sliding mode controller which needed 3.7 milliseconds. When the resistance subsequently stepped from 5 ohms to 20 ohms, the proposed controller recorded an overshoot of 134.33 percent compared to 136.66 percent under backstepping control, alongside an undershoot of 20.23 percent compared to 5.66 percent observed under the unoptimized BDISMC configuration.

The investigators also subjected the six control schemes to severe input voltage fluctuations, varying the source supply abruptly from 24 volts up to 40 volts before dropping it sharply down to 15 volts under a continuous 12-volt reference setting. Throughout these supply variations, the BDISMCPSO scheme maintained tighter reference voltage tracking with minimal output ripple and superior disturbance rejection relative to existing techniques. Across all testing scenarios, the optimized hybrid controller consistently delivered the lowest steady-state errors, reaching static error values as low as 0.024, 0.24, and 0.05 millivolts, confirming that double integral tracking combined with optimized gain selection substantially dampens steady-state inaccuracies.

Despite these documented performance advantages, the authors emphasized several operational boundaries and physical constraints that accompany their design. While replacing the signum function with a hyperbolic tangent reaching law effectively suppressed control chattering in simulation, residual high-frequency oscillations may still emerge in the presence of severe sensor noise. Additionally, particle swarm optimization entails meaningful computational overhead during offline design phases, and controller robustness remains sensitive to the accuracy of predefined system model parameters. Because the comparative scope excluded hardware-in-the-loop experiments, component aging effects, and full-scale physical prototyping, the researchers concluded that future investigations should explore adaptive gain scheduling and real-time experimental validation across broader electrical environments.

To establish mathematical rigor prior to simulation, the researchers conducted detailed stability proofs based on the Lyapunov stability criterion for each formulated control strategy. In formulating the conventional sliding mode design, the sliding surface combined tracking error with its first derivative, and stability was proven using a quadratic Lyapunov function whose time derivative remained strictly negative under a positive parameter condition. For the recursive backstepping control scheme, dynamic tracking coordinates were established across sequential design steps, with the second step incorporating coordinate dynamics to ensure that system trajectories converged to global asymptotic stability when specific gain parameters were kept strictly positive.

The study also delineated explicit formulations for both integral and double integral sliding mode variants operating in continuous conduction mode. In the integral sliding mode architecture, the sliding surface incorporated an extra voltage integral error term alongside designated coefficients, leading to an equivalent control law governing the converter duty ratio. For the double integral sliding mode controller, the state vectors tracked four distinct variables: voltage error, error rate of change, the first integral of error, and the double integral of error. By enforcing derivative conditions across these sliding surfaces, the equivalent control laws bounded the resulting duty signals strictly between zero and one, establishing theoretical stability across all non-hybrid formulations.

For the proposed hybrid architecture, the team structured the double integral sliding surface as a function of voltage error, its first integral, its second integral, and inductor current tracking error. To guarantee dynamic convergence toward this manifold, the authors integrated a specialized reaching law that combined a hyperbolic tangent function with a linear sliding term, governed by positive constant parameters. When substituting this reaching law into the time derivative of the chosen quadratic Lyapunov function, the resulting expression proved to be negative semi-definite, confirming mathematically that the closed-loop system maintains Lyapunov stability across severe operating conditions.

These analytical formulations directly informed how the algorithm structured gain optimization during simulation. Offline particle swarm optimization targeted five essential parameters, consisting of the three sliding surface gains and the two reaching law coefficients. By systematically balancing these five values, the optimization process minimized tracking error while damping the severe control effort typically required during abrupt transient disturbances.

Subject of Research: Nonlinear control strategies and parameter optimization for bidirectional DC–DC buck/boost converters

Article Title: Comparative analysis of nonlinear controllers applied to a bidirectional buck/boost DC–DC converter

Article References: Cham, J. D., Koffi, F. L. D., Ekemb, G., Jean-Paul, N., & Boum, A. T. (2026). Comparative analysis of nonlinear controllers applied to a bidirectional buck/boost DC–DC converter. Journal of Electrical Systems and Information Technology, 13(1), Article 88. https://doi.org/10.1186/s43067-026-00384-4

Image Credits: AI Generated

DOI: 10.1186/s43067-026-00384-4

Keywords: bidirectional buck/boost converter, DC-DC power converter, sliding mode control, backstepping control, BDISMC, particle swarm optimization, Lyapunov stability, chattering mitigation, integral sliding mode control, double integral sliding mode control, voltage regulation, MATLAB Simulink simulation, power electronics, transient response, load resistance variation, robust control

Cite Scienmag News

Denise Maddox. (November 21, 2026). Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters. Scienmag. https://scienmag.com/optimized-nonlinear-controller-enhances-voltage-regulation-in-bidirectional-dc-dc-converters/

Denise Maddox. "Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters." Scienmag, 21 November 2026, https://scienmag.com/optimized-nonlinear-controller-enhances-voltage-regulation-in-bidirectional-dc-dc-converters/. Accessed 21 November 2026.

Denise Maddox. "Optimized Nonlinear Controller Enhances Voltage Regulation in Bidirectional DC–DC Converters." Scienmag. November 21, 2026. https://scienmag.com/optimized-nonlinear-controller-enhances-voltage-regulation-in-bidirectional-dc-dc-converters/

Tags: backstepping controlBDISMCbidirectional buck/boost converterchattering mitigationDC-DC power converterDouble Integral Sliding Mode Controlintegral sliding mode controlload resistance variationLyapunov stabilityMATLAB/Simulink simulationparticle swarm optimizationpower electronicsrobust controlsliding mode controltransient responsevoltage regulation
Share26Tweet16
Previous Post

Study Links Procedural History and Portal Access to Mohs Surgery Outcomes

Next Post

Researchers Propose Hybrid Artificial Intelligence Architecture to Optimize Complex Pharmacotherapy Regimens

Related Posts

UK Survey Reveals Disparities in Advanced Arthritis Drug Access for Children
Science News

UK Survey Reveals Disparities in Advanced Arthritis Drug Access for Children

November 21, 2026
Cladribine Reduced Relapses but Not Disability Progression in Secondary Progressive MS
Medicine

Cladribine Reduced Relapses but Not Disability Progression in Secondary Progressive MS

November 21, 2026
Bedside Reinforcement Learning Requires Clinical Infrastructure Before Intensive Care Implementation
Medicine

Bedside Reinforcement Learning Requires Clinical Infrastructure Before Intensive Care Implementation

November 21, 2026
Near-Extremal Black Hole Entropy Yields Logarithmic Corrections in Massive Gravity
Technology and Engineering

Near-Extremal Black Hole Entropy Yields Logarithmic Corrections in Massive Gravity

November 21, 2026
Review Outlines Clinical Practice and Mechanisms in Autoantibody Mediated Immunodeficiency
Medicine

Review Outlines Clinical Practice and Mechanisms in Autoantibody Mediated Immunodeficiency

November 21, 2026
Risk Score Stratifies Cardiac Conduction Block in Anti-SSA/Ro Antibody-Positive Adults
Medicine

Risk Score Stratifies Cardiac Conduction Block in Anti-SSA/Ro Antibody-Positive Adults

November 21, 2026
Next Post
Researchers Propose Hybrid Artificial Intelligence Architecture to Optimize Complex Pharmacotherapy Regimens

Researchers Propose Hybrid Artificial Intelligence Architecture to Optimize Complex Pharmacotherapy Regimens

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • UK Survey Reveals Disparities in Advanced Arthritis Drug Access for Children
  • Cladribine Reduced Relapses but Not Disability Progression in Secondary Progressive MS
  • Bedside Reinforcement Learning Requires Clinical Infrastructure Before Intensive Care Implementation
  • Near-Extremal Black Hole Entropy Yields Logarithmic Corrections in Massive Gravity

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,151 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading