A research team investigating propulsion options for miniaturized spacecraft has demonstrated that combining electric double-layer capacitors, a rectangular thruster channel, and a vacuum arc igniter can overcome critical operational hurdles facing surface arc thrusters. Surface arc thrusters operate as electrothermal propulsion devices, generating thrust by sublimating a solid propellant through an electric arc discharge. Because nanosatellites such as CubeSats face rigorous mass, volume, and power budgets, their expanding mission profiles require propulsion systems capable of providing controlled orbit and attitude adjustments without endangering delicate onboard electronics. While pulsed plasma thrusters have historically served similar roles, their intense, fluctuating discharge currents generate severe electromagnetic interference capable of disrupting sensitive satellite instruments. Surface arc thrusters offer a compelling alternative by functioning at comparatively low and stable discharge currents while employing compact, easily handled solid propellants, yet practical implementations have remained limited by bulky power supplies, non-uniform propellant ablation, and high-voltage ignition circuits.
To confront these interrelated limitations within a unified experimental investigation, researchers Kazuki Nishioka, Tomohiro Shinnyo, and Kazuhiro Toyoda evaluated three distinct architectural modifications using paraffin wax as a reference propellant. Paraffin wax provides an advantageous test medium for surface arc mechanisms due to its low melting point and ease of sublimation. In standard surface arc operation, thruster firing begins when an igniter triggers a spark across the propellant surface, initiating a main arc discharge that heats and sublimates the solid fuel into a gas, which is subsequently expelled through the thruster head to produce momentum. In conventional setups, however, powering this arc requires substantial capacitor hardware, and initiating the arc across vacuum gaps demands voltages reaching several tens of kilovolts. The research team systematically investigated whether electric double-layer capacitors could replace conventional capacitor banks, whether altering the discharge chamber from a cylindrical to a rectangular configuration could mitigate uneven fuel consumption, and whether a carbon fiber-reinforced plastic vacuum arc thruster could reliably initiate discharge at significantly reduced voltages.
The power supply investigation centered on developing a compact energy storage unit capable of sustaining the millisecond-scale discharges necessary for effective electrothermal heating. Standard CubeSat thruster experiments often employ aluminum electrolytic capacitor banks, which require elevated operating voltages to store sufficient energy and consume disproportionate physical volume within standardized satellite chassis. To resolve this constraint, the researchers designed and constructed an electric double-layer capacitor bank prototype measuring 105 by 55 by 17 millimeters, dimensions fully compatible with CubeSat integration requirements. The bank incorporated seventeen SCMR14H474PRBB0 supercapacitor cells connected in series, each featuring a nominal capacitance of 470 millifarads, a rated voltage of 6 volts, and an equivalent series resistance of 380 milliohms. This series arrangement provided a total equivalent capacitance of 28 millifarads and permitted safe operational charging up to approximately 100 volts, yielding an aggregate stored electrical charge of roughly 2.8 coulombs.
Experimental evaluation of the supercapacitor bank was carried out inside a cylindrical vacuum chamber measuring 0.45 meters in diameter and 0.5 meters in height, maintained at a baseline operating pressure of approximately 10 microtorr, or 1 × 10⁻³ pascals. Real-time vacuum fluctuations were monitored using an ionization vacuum gauge sensitive to pressures between 1.0 × 10⁻⁶ and 1.0 × 10⁻¹ pascals, while electrical parameters were tracked with a dedicated oscilloscope, a current monitor, and a clamp-on current sensor possessing a direct-current to 10-megahertz bandwidth. For baseline comparison, the researchers discharged an aluminum electrolytic capacitor bank comprising four 100-microfarad capacitors and one 47-microfarad capacitor, offering a total capacitance of 447 microfarads charged to 200 volts, which represented a stored charge of approximately 89 millicoulombs. The experimental discharges confirmed that the supercapacitor bank sustained extended millisecond-scale arcs, resulting in visible propellant ejection and an average vacuum chamber pressure increase of approximately 62 millipascals, compared to only 2.5 millipascals recorded during discharges from the aluminum electrolytic configuration.
Thrust delivery was quantified using the target displacement method, in which the thruster discharge transfers momentum directly to a suspended pendulum target. Measuring the maximum target displacement allows researchers to calculate the delivered impulse bit using the pendulum mass, the suspension length, and local gravitational acceleration. From this impulse bit and the net loss of propellant mass measured across discharge sequences, the team computed the thruster specific impulse. Discharges powered by the supercapacitor prototype delivered an average impulse bit of approximately 292 micronewton-seconds, vastly exceeding the modest 5.23 micronewton-seconds produced by the aluminum electrolytic bank. These comparative tests demonstrated that supercapacitors can reliably drive surface arc devices within compact spatial envelopes, delivering discharges of sufficient duration to sublimate propellant and impart measurable thrust. However, continuous operation of the original coaxial thruster body revealed persistent problems, including localized discharge channeling and uneven propellant consumption that threatened continuous operational stability.
To suppress localized arc concentration, the researchers redesigned the thruster geometry into a rectangular channel machined from MACOR, a machinable ceramic chosen for its thermal endurance and electrical insulating properties. The rectangular thruster structure utilized two primary plates measuring 20 by 20 by 2 millimeters, between which an intermediate plate measuring 20 millimeters long and 3 to 5 millimeters wide was clamped from the top and bottom. Electrodes were positioned 2 millimeters from the leading edges of the plates, projecting roughly 1 millimeter into the discharge channel, while an igniter electrode was seated 4 millimeters from the edge and 2.5 millimeters from the bottom plate. By physically confining the paraffin wax between opposing planar electrodes, this geometry sought to direct the electrical arc uniformly across the propellant surface, counteracting the localized erosion patterns that typically plague cylindrical and coaxial thruster bodies.
Performance trials of the rectangular thruster prototypes were conducted inside an expanded cylindrical vacuum facility measuring 1.0 meter in diameter and 1.2 meters in length under identical vacuum pressure conditions. Testing configurations with channel dimensions of 5 millimeters long by 3 millimeters wide revealed a mean impulse bit of 282.4 micronewton-seconds, accompanied by a standard deviation of 74.5 micronewton-seconds. A longer configuration measuring 10 millimeters long by 3 millimeters wide produced a mean impulse bit of 200.9 micronewton-seconds with a standard deviation of 118.5 micronewton-seconds. Across these tests, shot-to-shot variability ranged between 25 and 60 percent of the mean impulse bit values. Corresponding specific impulse calculations for both prototypes hovered around 24 seconds, specifically 24.44 ± 6.39 seconds for the 5-by-3 millimeter thruster and 24.27 ± 14.32 seconds for the 10-by-3 millimeter thruster, which falls well below the 600 to 1200 seconds typically achieved by pulsed plasma thrusters.
Electrode material comparisons further demonstrated that discharge stability is intimately coupled to hardware construction. When molybdenum electrodes were tested under conditions identical to those used with enameled copper wire, the resulting discharge durations proved notably shorter and displayed increased shot-to-shot fluctuations. Subsequent attempts to fabricate practical, CubeSat-ready prototypes featuring integrated nozzle throats produced severe performance penalties. Prototypes measuring 5 by 3 millimeters with a 1.0-millimeter throat diameter, and 5 by 5 millimeters with throat diameters of 1.0 and 2.0 millimeters, delivered dramatically attenuated impulse bits ranging from 0.198 to 2.896 micronewton-seconds, alongside nominal specific impulses below 1 second. The authors determined that these steep drops were exacerbated by paraffin melting, which caused liquid fuel to seep into chamber crevices or adhere to surfaces rather than vaporizing, distorting gravimetric measurements and quenching arcs prematurely through localized throat backpressure.
The third major subsystem examined was the suppression of the high-voltage ignition spark, which conventionally requires tens of kilovolts and creates severe electromagnetic interference. Attempting to lower this breakdown threshold simply by narrowing the spark gap is rendered ineffective by Paschen’s law under hard vacuum conditions. To circumvent this physics constraint, the team implemented a vacuum arc thruster igniter utilizing carbon fiber-reinforced plastic recovered from recycled satellite solar cell fragments as both cathode and consumable material. The triple-junction architecture of the carbon fiber-reinforced plastic cathode permits spontaneous vacuum arc initiation at low applied voltages. Integrating this igniter with an aluminum electrolytic capacitor bank successfully triggered the main surface arc discharge at negative bias voltages between 300 and 400 volts, reducing the ignition voltage well below the 1-kilovolt mark.
While the vacuum arc thruster ignition mechanism proved the fundamental viability of low-voltage initiation, post-test visual examinations and statistical analyses revealed substantial hurdles regarding operational repeatability. Successful discharge triggering occurred at a relatively low overall frequency across repeated firing trials, and post-discharge inspection showed a thin layer of melted paraffin deposited directly onto the carbon fiber cathode surface. The researchers noted that this condensed residue likely alters local electrical properties and could contribute to inconsistent triggering in successive pulses. Furthermore, total shot counts throughout all testing phases were restricted by the thermal behavior of the paraffin wax, which formed liquid melt pools that prevented orderly propellant feeding and precluded standard endurance runs reaching hundreds of thousands or millions of shots.
By simultaneously evaluating energy storage, chamber geometry, and ignition circuitry within a single cohesive study, the researchers established critical baseline performance parameters and clarified the interdependence of key surface arc thruster components. The experiments confirmed that electric double-layer supercapacitors can satisfy CubeSat mass and volume limits while delivering sufficient current duration, that rectangular channels improve discharge confinement over coaxial designs, and that vacuum arc mechanisms offer a viable route toward sub-kilovolt ignition. Nevertheless, the low specific impulse, substantial pulse-to-pulse variability, and paraffin droplet ejection underline that practical flight readiness will require solid propellants with higher thermal stability, enhanced propellant feeding mechanisms, and refined impulse measurement diagnostics tailored to millisecond-duration arc discharges.
Subject of Research: Surface arc thruster engineering and testing for CubeSat propulsion systems
Article Title: Investigation of the use of electric double-layer capacitors and rectangular propeller shape to improve the performance of surface arc thrusters and to reduce the voltage of the igniter discharge circuit
Article References: Nishioka, K., Shinnyo, T., & Toyoda, K. (2026). Investigation of the use of electric double-layer capacitors and rectangular propeller shape to improve the performance of surface arc thrusters and to reduce the voltage of the igniter discharge circuit. Journal of Electric Propulsion, 5(1), Article 5. https://doi.org/10.1007/s44205-026-00181-1
Image Credits: AI Generated
DOI: 10.1007/s44205-026-00181-1
Keywords: Surface Arc Thruster, CubeSat Propulsion, Electric Double-Layer Capacitors, Supercapacitors, Vacuum Arc Thruster, Paraffin Propellant, Nanosatellites, Impulse Bit, Specific Impulse, Electromagnetic Interference, Pulsed Electric Propulsion, Spacecraft Subsystems, Arc Discharge, MACOR Ceramic, Ablation Uniformity, Target Displacement Method
Cite Scienmag News
Denise Maddox. (November 20, 2026). Supercapacitors and Rectangular Geometry Advance CubeSat Surface Arc Thruster Design. Scienmag. https://scienmag.com/supercapacitors-and-rectangular-geometry-advance-cubesat-surface-arc-thruster-design/
Denise Maddox. "Supercapacitors and Rectangular Geometry Advance CubeSat Surface Arc Thruster Design." Scienmag, 20 November 2026, https://scienmag.com/supercapacitors-and-rectangular-geometry-advance-cubesat-surface-arc-thruster-design/. Accessed 20 November 2026.
Denise Maddox. "Supercapacitors and Rectangular Geometry Advance CubeSat Surface Arc Thruster Design." Scienmag. November 20, 2026. https://scienmag.com/supercapacitors-and-rectangular-geometry-advance-cubesat-surface-arc-thruster-design/








