Fudan University researchers successfully demonstrated an atomic-layer molybdenum disulfide (MoS2) memory array aboard the Fudan No.1 Lancang-Mekong Future Satellite. The system, which operates without error-correction codes or additional hardware redundancy, maintained 100% data accuracy throughout a 23-month testing period in sun-synchronous low Earth orbit. This experiment represents the first real-time, on-orbit verification of atomic-layer semiconductor memory technology, addressing the persistent challenge of maintaining information integrity in the presence of intense space radiation environments.
Space exploration relies heavily on electronic components that are inherently susceptible to degradation caused by the radiation encountered in orbit. High-energy particles often introduce structural defects and trap states within traditional electronic devices, which fundamentally alter their electrical characteristics. These changes can make reading stored information unreliable or impossible over time. Researchers have therefore sought new semiconductor materials capable of maintaining stable performance under the high radiation doses typical of low Earth orbit operations.
Atomic-layer semiconductors offer a potential solution because their physical structure limits the accumulation of radiation-induced defects. By utilizing a monolayer of molybdenum disulfide, the Fudan University team fabricated a memory array via a 2-inch wafer-scale process. This design specifically aims to combine radiation tolerance with low-noise performance, facilitating a clearer, more stable distinction between the memory’s binary on and off states even when subjected to harsh environmental conditions.
The Fudan No.1 satellite was launched on September 24, 2024, entering a sun-synchronous low Earth orbit at an altitude of approximately 517 kilometers. The researchers programmed the memory array to store the letters ‘FDU’ using 15 binary bits. These bits were read periodically on the satellite and transmitted to a ground station for analysis. Consistent with the original programming, all reported complete readout records matched the stored message without error.
The study is notable because it did not rely on standard memory mitigation strategies often required for space applications. The researchers confirmed that the 100% accuracy was achieved without the use of error-correction codes, majority voting, or additional redundancy. This on-orbit testing effectively complements the team’s ground-based experiments, where they subjected identical devices to Co-60 γ-ray irradiation reaching total doses of up to 20 Mrad.
During these ground-based exposure experiments, the MoS2 transistors demonstrated significant stability. Measurements revealed that the on/off current ratios remained stable after irradiation, with read currents for the two states consistently differing by approximately eight orders of magnitude. This distinct separation allowed the states to remain easily distinguishable even after high-dose exposure. Based on these observations, researchers estimate the nominal on-orbit dose-accumulation time for the atomic-layer MoS2 memory array could theoretically extend to 500 years.
The devices also maintained stable low-noise characteristics throughout the testing. Electrical noise, specifically low-frequency fluctuations, can often interfere with data readouts by reducing the signal-to-noise ratio in conventional devices. The MoS2 arrays retained their low-noise performance even following 20 Mrad γ-ray irradiation. These findings collectively support the viability of high-reliability data readouts at picoampere current levels for future space-based electronic applications.
Led by corresponding author Peng Zhou, the work, which was published on November 6, 2026, in the National Science Review, underscores the practical potential of atomic-layer electronics. By integrating wafer-scale fabrication with rigorous ground and on-orbit testing, the researchers have provided empirical evidence for stable storage capabilities in space. This study represents a notable advancement in the field of radiation-tolerant semiconductors, pointing toward a future where more durable, low-noise memory technologies support increasingly complex space exploration missions.
The study, classified as an experimental investigation, integrates multiple testing phases to evaluate the memory array’s durability. By combining wafer-scale fabrication with ground-based irradiation and on-orbit real-time testing, the researchers created a comprehensive framework for assessing device performance. This multi-faceted approach allows for a direct comparison between laboratory simulations and actual space conditions, providing a more robust understanding of how the atomic-layer materials behave under sustained radiation exposure.
The specific use of monolayer molybdenum disulfide is central to the device’s design philosophy. The atomically thin functional layers are intended to limit the accumulation of radiation-induced defects that typically degrade conventional bulk silicon transistors. This structural advantage helps maintain a clear distinction between the on and off states of the memory, which is critical for reliable data storage in environments where high-energy particles can otherwise introduce defects and trap states into electronic components.
While the on-orbit results show consistent data retention, the study also includes ground-based measurements that provide additional context for the device’s limits. The nominal on-orbit dose-accumulation time of up to 500 years is an estimate derived from the observed radiation tolerance in laboratory settings. This projection highlights the potential longevity of the technology, though it remains a theoretical extension of the measured stability rather than a direct observation from the 23-month mission.
The findings suggest that atomic-layer semiconductors could serve as a viable alternative for future space electronics. By demonstrating stable storage and low-noise performance in a real space environment, the work addresses a key challenge for preserving information in harsh radiation environments. The results support the idea that these materials can maintain reliable data readout at picoampere current levels, which is essential for the operation of satellites that depend on memory to store essential programs and scientific data.
Subject of Research: On-orbit performance testing of a radiation-tolerant atomic-layer MoS2 memory array.
Article Title: First on-orbit real-time testing of atomic-layer memory
Article References: First on-orbit real-time testing of atomic-layer memory. Original publication (Bibliographic details unavailable.)
Image Credits: AI Generated
DOI: Not provided
Keywords: atomic-layer memory, molybdenum disulfide, MoS2, Fudan No.1 Satellite, radiation tolerance, space electronics, on-orbit testing, semiconductor devices, low-noise electronics, wafer-scale fabrication, gamma-ray irradiation, sun-synchronous orbit, data integrity, National Science Review, space exploration
Cite Scienmag News
Grant Pearson. (November 18, 2026). Atomic-Layer MoS2 Memory Passes Real-Time Radiation Testing Aboard Satellite. Scienmag. https://scienmag.com/atomic-layer-mos2-memory-passes-real-time-radiation-testing-aboard-satellite/
Grant Pearson. "Atomic-Layer MoS2 Memory Passes Real-Time Radiation Testing Aboard Satellite." Scienmag, 18 November 2026, https://scienmag.com/atomic-layer-mos2-memory-passes-real-time-radiation-testing-aboard-satellite/. Accessed 18 November 2026.
Grant Pearson. "Atomic-Layer MoS2 Memory Passes Real-Time Radiation Testing Aboard Satellite." Scienmag. November 18, 2026. https://scienmag.com/atomic-layer-mos2-memory-passes-real-time-radiation-testing-aboard-satellite/








