Tuesday, November 17, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News

Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions

November 17, 2026
in Science News
Denise Maddox
By Denise Maddox Scienmag Editorial Profile - Mechanical Engineering
Reading Time: 6 mins read
0
Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions

Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

In an investigation evaluating environmentally benign chemistries for nanoscale semiconductor manufacturing, researchers have demonstrated that substituting conventional fluoroform with 1,1,1,2,3,3-hexafluoropropane in inductively coupled plasma systems accelerates silicon dioxide etch rates while significantly lowering greenhouse gas impacts. The comparative study examined high-aspect-ratio etching performance across room-temperature and sub-zero conditions, establishing that low-temperature operation paired with 1,1,1,2,3,3-hexafluoropropane, designated chemically as C3H2F6, outperforms standard CHF3 plasma in material selectivity, pattern fidelity, and carbon-equivalent emission reductions. Conducted across chiller settings of 20 degrees Celsius and minus 20 degrees Celsius, the experimental work provides quantitative benchmarks for transitioning critical dielectric pattern-transfer processes toward lower global warming alternatives without sacrificing process throughput.

Nanoscale fabrication in advanced semiconductor devices depends directly on plasma etching to achieve precise dimensional control and high-fidelity transfer of dense, narrow patterns. High-aspect-ratio etching of silicon dioxide dielectric layers has historically relied upon carbon-rich hydrofluorocarbons and perfluorocarbons, including CHF3, CH2F2, and C4F8, because their fragmented precursors generate carbon-rich polymeric films that passivate feature sidewalls against lateral erosion. However, these traditional processing gases exhibit exceptionally long atmospheric lifetimes and intense infrared absorption bands, resulting in global warming potentials reaching thousands of times that of carbon dioxide. Standard CHF3 gas possesses an estimated 100-year global warming potential of approximately 14,600, presenting a substantial obstacle to carbon neutrality objectives across the global microelectronics sector.

Low-temperature plasma processing has emerged as an appealing strategy to improve etching performance, as temperature-dependent surface reactions and physisorption mechanisms alter chemical kinetics at feature surfaces. Under sub-zero conditions, physisorbed hydrogen fluoride species activate a pseudo-wet etching mechanism that effectively accelerates silicon dioxide removal. Faster vertical etch rates reduce total processing time, which in turn diminishes the overall volume of process gas consumed per wafer. Nevertheless, the majority of previously reported low-temperature silicon dioxide etching studies continued to employ high-global-warming chemistries such as CHF3 and CF4 mixed with hydrogen, partially offsetting the ecological advantage of shortened chamber runs. While low-global-warming candidates had been identified in room-temperature literature, their etching behaviors under sub-zero thermal regimes had remained uncharacterized.

To resolve this gap, the research team directly evaluated C3H2F6 against CHF3. Unlike its high-GWP counterpart, C3H2F6 exhibits a 100-year global warming potential of 1,500, which is roughly one-tenth the value recorded for CHF3. The C3H2F6 molecule possesses a calculated fluorine-to-carbon ratio metric, defined by the formula (F minus H) divided by C, of 1.3, ensuring an adequate supply of reactive fluorine to sustain efficient chemical etching of silicon dioxide. In addition, C3H2F6 has a normal boiling point of 6.5 degrees Celsius, allowing stable gas-phase mass-flow delivery into vacuum chambers under standard process delivery conditions. Its molecular backbone consists exclusively of single carbon-carbon, carbon-hydrogen, and carbon-fluorine bonds, providing an ideal baseline to track plasma dissociation pathways against single-carbon CHF3.

The experimental trials were conducted in an inductively coupled plasma reactor equipped with a top induction coil driven at 13.56 megahertz to supply 200 watts of source power, alongside a bottom electrode biased at 12.56 megahertz providing a cathode voltage of 1000 volts. Substrate temperature control was regulated between 20 degrees Celsius and minus 20 degrees Celsius using a specialized cryogenic chiller circulating refrigerant. Thermal calibration tests conducted using a thermocouple-instrumented wafer under high vacuum confirmed that when the chiller circulation was held at minus 20 degrees Celsius, the wafer chuck stabilized at minus 19.8 degrees Celsius, verifying that coolant monitoring served as an accurate indicator of real wafer surface temperatures. Across processing runs, the return coolant stabilized within approximately 3 degrees Celsius above the chiller setpoint within three minutes of ignition.

Etching evaluations were performed on patterned wafers comprising a 2,400-nanometer-thick layer of silicon dioxide beneath a 1,350-nanometer amorphous carbon layer mask capped with a 50-nanometer silicon oxynitride layer on an underlying silicon substrate. Hole patterns defined with an opening diameter of 180 nanometers provided an aspect ratio of 14:1. Process gas mixtures consisting of 15 standard cubic centimeters per minute of fluorocarbon precursor blended with oxygen, combined with 10 standard cubic centimeters per minute of argon diluent, were introduced into the chamber at a stabilized operating pressure of 20 millitorr. The oxygen concentration was tailored separately for each precursor to maintain the amorphous carbon mask consumption rate between 50 and 100 nanometers per minute, thereby preventing mask clogging or structural collapse.

Initial baseline evaluations conducted at a 20 degrees Celsius chiller setting identified optimized oxygen fractions of 10 percent for CHF3 and 30 percent for C3H2F6. Under these conditions, the blank silicon dioxide etch rate reached 257 nanometers per minute for CHF3 and 238 nanometers per minute for C3H2F6. Concurrently, the etch selectivity of silicon dioxide relative to the amorphous carbon mask reached 2.6 for CHF3 and increased to 4.1 for C3H2F6. The higher selectivity achieved with C3H2F6 demonstrated that the three-carbon precursor produced a much denser distribution of polymerizing radical fragments, protecting the carbonaceous mask layer while maintaining a primary silicon dioxide removal rate closely comparable to that of the legacy fluorocarbon.

Quadrupole mass spectrometry was utilized to monitor gas-phase radical generation in the plasma volume under 200 watts of source power, 1000 volts of bias, and 20 millitorr of total pressure. Strong hydrogen fluoride signals were detected in both discharges owing to hydrogen extraction from the precursor backbones, with C3H2F6 generating a higher relative HF intensity. When oxygen was introduced, prominent carbon monoxide peaks appeared alongside minor carbon dioxide and carbonyl fluoride signatures. Analysis of molecular bond dissociation energies revealed that CF3 and CHF2 radicals predominated in both gas chemistries due to single-bond scission mechanisms. However, the multi-carbon structure of C3H2F6 yielded noticeably higher relative intensities of polymer-building CF, CHF, and CF2 radicals, which originate from extensive carbon-carbon bond dissociation, whereas CF3 species functioned as the primary chemical etchant.

When the chiller setpoint was reduced to minus 20 degrees Celsius, blank silicon dioxide etch rates rose to 290 nanometers per minute for CHF3 and 304 nanometers per minute for C3H2F6, representing relative rate enhancements of 13 percent and 28 percent, respectively, compared to room-temperature rates. This low-temperature rate boost was attributed to enhanced physical adsorption of plasma-generated HF radicals directly onto the silicon dioxide surface, facilitating the pseudo-wet etching reaction mechanism. In contrast, the etch rate of the amorphous carbon mask declined slightly at sub-zero temperatures. Surface characterization of the amorphous carbon layer using X-ray photoelectron spectroscopy showed an increase in atomic fluorine concentration and a slight decrease in carbon content at minus 20 degrees Celsius, demonstrating that enhanced low-temperature condensation of fluorocarbon species strengthened surface passivation against mask erosion.

Microstructural examination of the 180-nanometer patterned hole arrays via scanning electron microscopy confirmed that vertical etch rates inside the 14:1 high-aspect-ratio holes increased by 15 percent for CHF3 and by 31 percent for C3H2F6 when shifting from 20 degrees Celsius down to minus 20 degrees Celsius. While etch rates responded positively to lower temperatures, profile morphology was dictated primarily by the precursor chemistry rather than thermal setpoints. The CHF3 plasma suffered from lateral bowing and tapering because deficient polymeric CFx radical densities provided inadequate sidewall protection against energetic scattered ions. Conversely, the high concentration of polymerizing CFx radicals generated by C3H2F6 formed robust sidewall passivation films, suppressing bowing and yielding highly vertical feature profiles with superior top-to-bottom critical dimension ratios.

Environmental evaluations of reactor exhaust streams were carried out using in-line Fourier-transform infrared spectroscopy with a heated absorption cell maintained at 180 degrees Celsius and 200 torr. While unreacted feed gases dissociated and recombined into high-GWP CF4 and residual CHF3 in the reference plasma, the effluent from the C3H2F6 discharge recombined predominantly into low-impact byproducts, including HF, CO2, and COF2, which rapidly break down in the atmosphere. Calculating 100-year carbon-dioxide-equivalent mass emissions across a four-minute plasma-on duration demonstrated that C3H2F6 reduced net greenhouse gas emissions by 21 percent compared to CHF3 under identical operating powers and bias levels.

These experimental findings verify that pairing low-global-warming 1,1,1,2,3,3-hexafluoropropane with sub-zero substrate cooling resolves the traditional trade-off between semiconductor process performance and greenhouse gas mitigation. By accelerating vertical etch rates through surface-adsorbed HF mechanisms while simultaneously improving mask selectivity and profile verticality through abundant polymeric radical passivation, C3H2F6 establishes a viable pathway for high-aspect-ratio dielectric patterning in advanced device fabrication nodes.

Subject of Research: Low-temperature high-aspect-ratio silicon dioxide plasma etching using low-global-warming C3H2F6 gas

Article Title: Low-temperature etching of SiO2 using low-global warming C3H2F6 plasma for nanoscale semiconductor device fabrication

Article References: Lee, E., Hong, D., Han, Y., Jeon, M., & Chae, H. (2026). Low-temperature etching of SiO2 using low-global warming C3H2F6 plasma for nanoscale semiconductor device fabrication. Micro & Nano Manufacturing, 2(1), Article 16. https://doi.org/10.1007/s44374-026-00024-x

Image Credits: AI Generated

DOI: 10.1007/s44374-026-00024-x

Keywords: silicon dioxide etching, C3H2F6, CHF3, low-temperature etching, global warming potential, high-aspect-ratio etching, inductively coupled plasma, quadrupole mass spectrometry, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, amorphous carbon layer, nanoscale semiconductor fabrication, sidewall passivation, greenhouse gas emissions, plasma dissociation, etch selectivity, semiconductor manufacturing

Cite Scienmag News

Denise Maddox. (November 17, 2026). Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions. Scienmag. https://scienmag.com/low-temperature-c3h2f6-plasma-accelerates-silicon-dioxide-etching-while-lowering-emissions/

Denise Maddox. "Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions." Scienmag, 17 November 2026, https://scienmag.com/low-temperature-c3h2f6-plasma-accelerates-silicon-dioxide-etching-while-lowering-emissions/. Accessed 17 November 2026.

Denise Maddox. "Low-Temperature C3H2F6 Plasma Accelerates Silicon Dioxide Etching While Lowering Emissions." Scienmag. November 17, 2026. https://scienmag.com/low-temperature-c3h2f6-plasma-accelerates-silicon-dioxide-etching-while-lowering-emissions/

Tags: amorphous carbon layerC3H2F6CHF3etch selectivityFourier-transform infrared spectroscopyglobal warming potentialgreenhouse gas emissionshigh-aspect-ratio etchinginductively coupled plasmalow-temperature etchingnanoscale semiconductor fabricationplasma dissociationquadrupole mass spectrometrysemiconductor manufacturingsidewall passivationsilicon dioxide etchingX-ray photoelectron spectroscopy
Share26Tweet16
Previous Post

Surgical Internet of Medical Things Faces Cyber Threats Endangering Patient Safety

Next Post

Systematic Review Finds No Clear Mortality Benefit Across Six Sepsis Treatments

Related Posts

Pilot Trial Protocol Evaluates Liberal Blood Transfusions in Acute Leukemia Patients
Science News

Pilot Trial Protocol Evaluates Liberal Blood Transfusions in Acute Leukemia Patients

November 17, 2026
Clinical Task Involvement Linked to Higher Job Satisfaction Among Community Pharmacists
Medicine

Clinical Task Involvement Linked to Higher Job Satisfaction Among Community Pharmacists

November 17, 2026
Nasopharyngeal Microbiota Profiles Reveal Divergent Bacterial Pathways in Adult Pneumococcal Pneumonia
Science News

Nasopharyngeal Microbiota Profiles Reveal Divergent Bacterial Pathways in Adult Pneumococcal Pneumonia

November 17, 2026
Climate Anomalies and Control Delays Drove China Wheat Stripe Rust Outbreak
Science News

Climate Anomalies and Control Delays Drove China Wheat Stripe Rust Outbreak

November 17, 2026
Rhizosphere Microbiomes and Turnip Rotations Show Potential for Saline Soil Rehabilitation
Science News

Rhizosphere Microbiomes and Turnip Rotations Show Potential for Saline Soil Rehabilitation

November 17, 2026
Gellan Gum and Hydrocolloids Control Anthocyanin Dissolution in Vegan Jelly Candies
Chemistry

Gellan Gum and Hydrocolloids Control Anthocyanin Dissolution in Vegan Jelly Candies

November 17, 2026
Next Post
Systematic Review Finds No Clear Mortality Benefit Across Six Sepsis Treatments

Systematic Review Finds No Clear Mortality Benefit Across Six Sepsis Treatments

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • Pilot Trial Protocol Evaluates Liberal Blood Transfusions in Acute Leukemia Patients
  • Clinical Task Involvement Linked to Higher Job Satisfaction Among Community Pharmacists
  • Nasopharyngeal Microbiota Profiles Reveal Divergent Bacterial Pathways in Adult Pneumococcal Pneumonia
  • Climate Anomalies and Control Delays Drove China Wheat Stripe Rust Outbreak

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,150 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading