The Slow Drain: Tiny Electronic Currents Threaten Solid-State Battery Storage

Solid-state batteries have been heralded as the next great leap in energy storage, promising higher energy densities, improved safety and longer lifetimes than the lithium-ion cells that power everything from smartphones to electric vehicles. At the heart of this promise lies a simple assumption: the solid electrolytes that replace flammable liquid solvents are, for all practical purposes, perfect insulators for electrons. They are supposed to shuttle lithium ions rapidly between the electrodes while blocking electronic current entirely. A News & Views article by Joohyeon Noh and Kisuk Kang of Seoul National University, published in Nature Energy, now argues that this comforting assumption deserves far more scrutiny than it has typically received, because the tiny electronic leakage that solid electrolytes do exhibit may quietly determine whether solid-state cells can survive years on the shelf.

The commentary accompanies two independent studies that, taken together, reveal a previously underappreciated failure mode: self-discharge driven by residual electronic conductivity in solid electrolytes. Self-discharge is familiar to anyone who has picked up a gadget after months of storage only to find the battery partially drained. In conventional liquid-electrolyte cells, self-discharge arises from parasitic side reactions and impurity-driven shuttles. In solid-state cells, the story turns out to be more subtle. Because the electrolyte is a solid, the cell can be fully assembled and sealed, and yet an internal electronic pathway can still allow charge to bleed from one electrode to the other without any external connection at all.

Physically, the mechanism can be understood as an internal short circuit of very high resistance. A solid electrolyte is never a perfect electronic insulator; its electronic conductivity, while many orders of magnitude lower than its ionic conductivity, is finite. When a cell is charged, the two electrodes sit at different electrochemical potentials, separated by the full cell voltage. That potential difference drives a minute electronic current through the electrolyte even at open circuit, slowly transferring electrons and, through coupled chemical processes, neutralizing the stored lithium gradient between the cathode and the anode. Individually the leakage currents are vanishingly small, but battery storage is a marathon measured in months and years, and even minuscule currents accumulate into meaningful capacity loss over a product’s shelf life.

The two studies highlighted in the commentary converge on this conclusion from complementary directions, and both emphasize that the problem becomes more severe as cells become thinner and more practical. Laboratory demonstration cells often use thick, mechanically robust solid electrolyte layers, which present a long, high-resistance path to stray electrons. Real commercial designs, however, demand thin electrolyte membranes to maximize volumetric and gravimetric energy density. Halving the electrolyte thickness doubles the electronic leak for a given cell voltage, meaning that the very design changes needed to make solid-state batteries commercially competitive also amplify the hidden leak. The studies identify the conductivity limits that solid electrolytes must satisfy to guarantee long shelf life, effectively setting an engineering specification that materials designers can now target explicitly.

This framing represents a shift in how the field thinks about solid electrolyte characterization. Historically, researchers have compared candidate materials almost exclusively by their ionic conductivities, chasing sulfides, oxides and halides that transport lithium ions as fast as possible. Values exceeding ten millisiemens per centimeter, rivaling or exceeding liquid electrolytes, are now routinely reported. Electronic conductivity, by contrast, has often been measured only sporadically, and sometimes under conditions that do not reflect the electrochemical potentials a real cell experiences. The new work makes clear that the ratio of electronic to ionic transport is not a curiosity but a first-order design parameter, and that a material with spectacular ionic conductivity can still fail the shelf-life test if its electronic leakage is too high.

The commentary’s authors situate these findings within a broader body of literature on electronic transport in solid electrolytes. Prior theoretical and computational studies had already established that many widely used solid electrolytes, including thiophosphate-based materials, possess non-negligible electronic conductivity, and that redox-active elements within their crystal structures can mediate electronic conduction. Experimental reports had also documented oxidative decomposition at cathode interfaces and the formation of electronically conductive interphases. What the two new studies add is the direct connection between this background knowledge and a measurable, practically consequential phenomenon: capacity loss at open circuit in assembled cells, quantified against electrolyte thickness, voltage and storage time.

The practical implications reach into nearly every corner of the solid-state battery program. For cell engineers, the results suggest that shelf-life specifications cannot be met by sealing and thermal management alone; the intrinsic electronic conductivity of the electrolyte layer must be engineered below a critical threshold that scales with allowable storage duration. For materials scientists, the findings add an optimization target that may sometimes conflict with existing goals, since processing routes that densify electrolyte membranes or improve interfacial contact could also alter their defect chemistry and electronic transport. For theorists, the work underscores the value of first-principles predictions of electronic band structure, defect ionization and polaron hopping in complex solid electrolytes, which can guide screening before samples are ever synthesized.

There is also a diagnostic dimension. Because self-discharge through electronic leakage leaves distinctive signatures, such as voltage decay profiles at open circuit that depend systematically on electrolyte thickness and temperature, the phenomenon offers an accessible experimental probe. Testing protocols that deliberately vary membrane thickness can separate electronic leakage from other degradation pathways, such as interfacial decomposition or dendrite formation, giving the community a cleaner way to attribute capacity loss to its root cause. In an industry where a single misdiagnosed failure mode can misdirect years of development, such discriminating tests carry real value.

None of this diminishes the fundamental appeal of solid-state batteries, and the commentary is careful to frame the new results as a design constraint rather than a fatal flaw. The ionic conductivities of the best solid electrolytes are extraordinary, the interface chemistry is increasingly well controlled, and manufacturing routes for thin membranes are maturing rapidly. What the findings change is the checklist. A viable solid electrolyte must now demonstrate not only fast lithium transport and electrochemical stability but also electronic insulation sufficient to keep a charged cell from slowly draining itself while it sits in a warehouse waiting to be installed in a vehicle.

The image of a solid that leaks like a sieve, only for electrons rather than for ions, is likely to resonate well beyond the battery community, because it illustrates a recurring theme in materials science: properties that are negligible at one scale or one timescale can dominate at another. As solid-state cells move from laboratory prototypes toward commercial products with multi-year warranties and grid-scale storage duties, the hidden leak identified in these studies will need to be plugged, measured and monitored with the same rigor that the field has long applied to ionic conduction. The two studies and the accompanying commentary give researchers the conceptual tools and the quantitative limits to do exactly that, turning a subtle electrochemical surprise into an actionable engineering target.

Subject of Research: Self-discharge in solid-state batteries caused by residual electronic conductivity of solid electrolytes

Article Title: A hidden leak in solids

Article References: Noh, J., & Kang, K. (2026). A hidden leak in solids. Nature Energy. https://doi.org/10.1038/s41560-026-02133-3

Image Credits: AI Generated

DOI: 10.1038/s41560-026-02133-3

Keywords: solid-state batteries, solid electrolytes, self-discharge, electronic conductivity, ionic conductivity, shelf life, lithium-ion transport, energy storage, battery degradation, Nature Energy, hidden, leak