Hot compression tests and electron backscatter diffraction identified 550–600 °C and strain rates of 0.0001–0.0005 s−1 as a comparatively stable...

An experiment using multi-objective Bayesian optimization mapped the strength–stretchability trade-off in polyethylene composite films and linked it to molecular alignment...

A laboratory study prepared porous Ni–Cr alloy foam by vacuum-depositing chromium onto nickel foam and measured its composition, compressive strength...

A laboratory study found that copper nanoparticles in a carbazole copolymer produced smaller threshold-voltage intervals, greater three-state current contrast and...

A study of Ti–5Cu alloy sheets found that solution treatment at 860 °C for 1,800 s produced the best overall...

Polymer scientists have been quietly flooding the open-data ecosystem. Between 2020 and 2025, more than 53,000 openly deposited polymer datasets...

A resistance-graded graphene/polymer fabric sensor maintained a quasi-linear response from 0.1 to 200 kPa and showed higher fitted sensitivity underwater...

A nano-TiO2/oxidized starch composite film optimized by response surface methodology suppressed browning and delayed senescence in postharvest Lanzhou lily bulbs...

A comparative study shows that cryo-rolling and annealing give the Al0.3CoCr1.3FeMnNi0.7 dual-phase high-entropy alloy a yield strength near 786 MPa...

Flexible polyvinyl alcohol films containing up to 50 weight percent boric acid reduced the thermal neutron half value layer from...