A research team led by Dongyeon Daniel Kang and colleagues has designed and experimentally validated an open-source control architecture that unites nanosecond-level microwave spin manipulation, resonant optical pulses, and time-gated single-photon counting inside a single field-programmable gate array platform. Reported in EPJ Quantum Technology, the system extends the established Quantum Instrumentation Control Kit framework to meet the distinct physical demands of solid-state defect interfaces, such as nitrogen-vacancy centers in diamond. In doing so, the investigators successfully replaced sprawling assemblies of standalone laboratory instruments with a synchronized, event-driven hardware fabric capable of running complex quantum-networking protocols.
Building functional quantum networks requires robust interfaces that coherently link stationary matter qubits, which store and process quantum states locally, with flying photonic qubits that carry quantum information across long physical distances. In solid-state systems based on defect centers in wide-bandgap materials, these interactions demand simultaneous, tightly coordinated control over multiple physical domains. Researchers must orchestrate microwave pulses to steer electronic spin states, laser pulses to induce spin-selective optical transitions, and photodetectors to record discrete photon arrival times with nanosecond timing resolution. When experiments attempt advanced operations such as time-gated photon detection, conditional feedback, and multi-step entanglement protocols, the sheer coordination of heterogeneous laboratory instruments frequently emerges as a primary bottleneck.
Historically, research teams have controlled spin-photon interface experiments by combining discrete laboratory instruments, including independent arbitrary waveform generators, dedicated microwave synthesizers, multichannel pulse counters, and shared digital timing units. Although these multi-instrument setups provide flexibility for initial proof-of-principle demonstrations, scaling them up presents severe physical and operational barriers. Connecting disparate boxes introduces extensive cabling runs, complex timing calibrations, unpredictable inter-instrument propagation delays, and significant integration overhead that hampers experimental reproducibility. Furthermore, assembling racks of bulky, high-cost commercial instruments becomes impractical as experiments expand toward multinode network architectures, prompting researchers to seek unified hardware solutions capable of deterministic orchestration across the entire control stack.
While commercial field-programmable gate array platforms offer high-speed processing, they are often expensive and governed by proprietary closed-source firmware that restricts custom adaptation. Conversely, developing fully bespoke FPGA architectures from scratch demands extensive register-transfer level digital design expertise that few experimental quantum physics laboratories can maintain or reproduce. The open-source Quantum Instrumentation Control Kit originally alleviated this difficulty for superconducting quantum circuits by offering a reusable FPGA overlay on commercial evaluation boards. However, superconducting setups rely primarily on analog-to-digital converters to sample continuous analog waveforms, whereas solid-state defect experiments require high-speed digital counting of discrete electrical pulses emitted by single-photon detectors. Digitizing discrete detector pulses through analog-to-digital converters wastes limited conversion channels and introduces unnecessary processing overhead.
To overcome this limitation, the authors developed a specialized FPGA overlay executed on a AMD-Xilinx ZCU111 evaluation board that integrates native single-photon counting primitives directly into the QICK digital architecture. The platform implements 13 independent single-photon counter channels within the programmable logic. Each channel incorporates a pulse-width modulator that establishes a user-programmable detection window synchronized directly to the 384 MHz tProcessor clock, alongside a digital pulse counter that accumulates arriving detector pulses strictly within that window. In parallel, the architecture features a dedicated two-channel time-event recording pathway that logs photon timestamps into on-chip block random-access memory at the 384 MHz clock frequency, enabling detailed subsequent temporal correlation analysis on the embedded processing system.
The counter channels process incoming digital signals through the board-level PMOD interface rather than through analog conversion paths. Because detector pulses enter as logic-level digital signals, the authors characterized the physical electrical requirements at the PMOD connector, demonstrating that digital pulses with minimum amplitudes of 0.97 V and pulse widths of at least 3.25 ns are registered without missed counts. The counter’s finite state machine cycles deterministically from an idle state through a programmable wait delay, enters an active counting state for the precise duration set by the pulse-width modulator, and returns to idle to latch the accumulated total. To verify counting accuracy across diverse pulse sequences, the authors constructed an on-chip arbitrary pattern generator in a loopback configuration, demonstrating exact numerical agreement across 65,536 distinct programmed pulse-burst patterns without a single missed event.
To bridge high-level protocol programming and deterministic hardware execution, the researchers created a two-tiered middleware software framework divided into a User layer and a Quantum control layer. Operating on a host computer, the User layer provides an experimental scheduler, sequence configuration modules, parameter tuning tools, and a graphical interface that serializes complex instructions—such as microwave pulse durations, phase shifts, and gating delays—without forcing researchers to modify low-level hardware registers. This software also integrates auxiliary laboratory hardware, including tunable laser controllers, wavelength meters, and automated piezo alignment stages, allowing the system to compensate automatically for optical drift and spectral shifts during protracted measurements. The commands travel over a client-server connection to the Quantum control layer, where a PYNQ-based server dispatches instructions to predefined pulse routines in the FPGA fabric.
The team validated the fully integrated platform experimentally using a single nitrogen-vacancy center housed in a cryogenic bulk diamond sample maintained at 5 K. Optical excitation was delivered through a home-built confocal microscope equipped with a 100x objective lens of 0.9 numerical aperture, while a solid immersion lens fabricated on the 2 by 2 square millimeter diamond enhanced fluorescence collection efficiency. Coherent microwave driving was applied via a patterned gold surface antenna, and emitted photons were detected using silicon single-photon counting modules connected to the FPGA digital inputs. Point-by-point confocal scans mapped the emitter coordinates, after which Hanbury Brown–Twiss interferometry confirmed true single-photon emission, resolving a characteristic second-order antibunching dip with a 2.6 ns timestamp resolution that closely mirrored measurements taken with a standalone commercial time tagger.
Coherent spin manipulation was established under a 13 G magnetic field aligned along the defect axis. Sweeping microwave frequencies across the spin transitions revealed optically detected magnetic resonance peaks at approximately 2838.7 MHz and 2912.85 MHz. Using these frequencies, the team executed pulsed Rabi oscillations, calibrating a pi-pulse duration of 47.6 ns with nanosecond-level timing precision, and recorded coherent Hahn-echo spin refocussing yielding a coherence time of roughly 468 microseconds. Transitioning to the resonant optical regime, photoluminescence excitation spectroscopy with a narrow-linewidth 637.2 nm red laser revealed single-scan optical linewidths of 71 MHz, exhibiting spectral diffusion on the order of 100 MHz over repeated scans. Under resonant red excitation, the spin readout contrast reached 72%, substantially outperforming the 30% contrast observed under conventional off-resonant green laser illumination.
Leveraging this enhanced optical spin contrast, the researchers executed an entanglement-compatible time-bin spin-photon correlation protocol entirely orchestrated by the FPGA platform. The sequence initialized the electron spin into a coherent superposition, applied a first spin-selective resonant excitation to define an early photonic time bin, executed a microwave spin-flip operation, and applied a second optical pulse to establish a late time bin. Emitted phonon-sideband photons, collected at count rates near 200 kilocounts per second, were classified into temporal bins and matched against single-shot spin readout results evaluated directly on the board. The resulting population distribution demonstrated a time-bin contrast of 0.48, confirming preferential correlation within the target state space and proving that open-source FPGA overlays can successfully direct the multivariable pulse sequences required for scalable quantum network nodes.
Subject of Research: Open-source FPGA architecture for solid-state spin-photon quantum interfaces
Article Title: An open-source FPGA control architecture for solid-state spin-photon interfaces
Article References: Park, J.-P., Park, C., Jeon, M., Lee, Y. S., Choi, Y., Kim, Y.-G., Park, N.-R., Kim, I.-Y., Son, S.-K., Kim, C., Jeon, S.-W., Han, S.-W., & Kang, D. D. (2026). An open-source FPGA control architecture for solid-state spin-photon interfaces. EPJ Quantum Technology, 13(1), Article 103. https://doi.org/10.1140/epjqt/s40507-026-00555-2
Image Credits: AI Generated
DOI: 10.1140/epjqt/s40507-026-00555-2
Keywords: quantum control, spin-photon interface, nitrogen-vacancy centers, FPGA overlay, QICK framework, single-photon counting, quantum networking, time-bin encoding, coherent spin manipulation, resonant optical excitation, diamond defect centers, RFSoC, photoluminescence excitation, deterministic timing, cryogenic quantum systems, confocal microscopy
Cite Scienmag News
Katie Riggs. (November 21, 2026). Open Source FPGA Architecture Orchestrates Solid State Spin Photon Quantum Interfaces. Scienmag. https://scienmag.com/open-source-fpga-architecture-orchestrates-solid-state-spin-photon-quantum-interfaces/
Katie Riggs. "Open Source FPGA Architecture Orchestrates Solid State Spin Photon Quantum Interfaces." Scienmag, 21 November 2026, https://scienmag.com/open-source-fpga-architecture-orchestrates-solid-state-spin-photon-quantum-interfaces/. Accessed 21 November 2026.
Katie Riggs. "Open Source FPGA Architecture Orchestrates Solid State Spin Photon Quantum Interfaces." Scienmag. November 21, 2026. https://scienmag.com/open-source-fpga-architecture-orchestrates-solid-state-spin-photon-quantum-interfaces/








