Friday, November 20, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News Technology and Engineering

Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid

November 20, 2026
in Technology and Engineering
Denise Maddox
By Denise Maddox Scienmag Editorial Profile - Mechanical Engineering
Reading Time: 6 mins read
0
Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid

Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

Researchers have fabricated ultrathin crystal sheets that, when stacked and twisted relative to each other, form a square lattice of structural defects at their interface. Strong bonding between the twisted layers causes the atoms at the contact boundary to rearrange into matching configurations, concentrating the remaining mismatch along narrow distorted lines known as screw dislocations. This atomic reconstruction alters the distribution of electrical charges, giving rise to tiny electrical patterns that could eventually assist engineers in designing materials for electronic and memory devices.

The study, led by investigators at the Technical University of Denmark and published in the journal Nature, demonstrated that strong bonding is crucial for governing interface behaviour. To achieve this result, the experimental team spent years developing techniques to synthesize high-quality crystalline sheets, align them precisely, bond them together, and rotate them at specific angles. According to Professor Nini Pryds of the Technical University of Denmark, establishing this strong bonding is essential because it allows researchers to examine directly what occurs where the two crystal layers meet.

The experimental work utilized freestanding crystalline sheets of strontium titanate, chemically designated as SrTiO3, which is a hard, chemically stable material frequently employed as a model oxide in electronics research. Each fabricated membrane measured approximately ten nanometres in thickness, where one nanometre equals one billionth of a metre. When regular atomic grids overlap at an angle, they typically create a larger repeating geometric arrangement known as a moiré pattern, analogous to laying two mesh screens crosswise and rotating one slightly.

Rather than retaining an ordinary moiré overlap, the strongly bonded strontium titanate interfaces reorganized at the atomic level. The initial indication of this structural transformation originated from computer simulations conducted by William Sandholt during his doctoral research at the Technical University of Denmark. By applying a machine learning model, Sandholt calculated the movements of atoms as the crystal sheets bonded and twisted, predicting a distinctive square dislocation grid that provided the experimentalists with an exact structural target to locate in the laboratory.

Subsequent physical modelling indicated that uneven mechanical distortions around the resulting grid lines can separate positive and negative electrical charges through flexoelectricity. This charge separation, termed polarisation, creates swirling configurations referred to as polar vortices. Because managing charge polarisation is directly relevant to energy storage and information memory architectures, these controllable polar patterns suggest prospective design concepts for future solid-state components.

Joint first author William Sandholt noted that altering the twist angle directly regulates the spacing between individual dislocation lines, offering a reliable method to control the physical dimensions of the interface structure. Experimental observations confirmed the presence of ordered dislocation networks when sheets were twisted at angles of 5, 7.5, and 10 degrees. In contrast, at a larger twist angle of 20 degrees, the pronounced dislocation network was absent because the spacing between the lines became too small to form the reconstructed grid.

Detecting the buried interfacial grid presented considerable experimental challenges because preliminary microscope images displayed standard moiré patterns without revealing the predicted lattice. Postdoctoral researcher and joint first author John Mangeri explained that the imaging electron beam must travel through roughly ten nanometres of material, cross the interface, and traverse another ten nanometres, meaning the resulting transmission image is heavily influenced by the crystal layers flanking the region of interest. To resolve the buried structure, the team simulated electron beam transmission and prepared cross-sectional samples cut in multiple directions.

Cross-sectional electron microscopy confirmed that the atomic arrangement at the sheet interface matched theoretical calculations almost perfectly. The identification and detailed characterization of the grid relied heavily on advanced electron microscopy performed by collaborating researchers at the University of Antwerp in Belgium and the SuperSTEM Laboratory in the United Kingdom. Further microscopy data, evaluated alongside theoretical simulations, substantiated the relationship between the rearranged atomic lattice and the emergent polar patterns.

The project brought together an international collaboration of institutions, including the Technical University of Denmark, the University of Antwerp, the SuperSTEM Laboratory, the University of York, Politecnico di Bari, the University of Leeds, and the University of Minnesota Twin Cities. The authors emphasized that the dislocations would not have been discovered without machine learning calculations predicting their existence, demonstrating the necessity of combining material synthesis, controlled assembly, computational simulation, and microscopic characterization.

Looking forward, the research team intends to investigate whether this bonding and twisting technique can generate comparable electrical behavior in other functional oxide materials. While calculations predict electronic states concentrated near the dislocation grid and the adjustable line spacing offers potential advantages for memory applications, the researchers caution that electrical conduction along the grid lines has not yet been demonstrated and must be evaluated through future experiments before these interfaces can function in working electronic devices.

The peer-reviewed study, titled “Designing dislocation-driven polar vortex networks in twisted perovskites” and catalogued under digital object identifier 10.1038/s41586-026-11330-9, was published in Nature on 18 November 2026. Led by the Technical University of Denmark, the collaborative work involved researchers from the University of Antwerp in Belgium, the SuperSTEM Laboratory in the United Kingdom, the University of York, Politecnico di Bari, the University of Leeds, and the University of Minnesota Twin Cities. Joint first authorship was shared equally by William Sandholt, Nicolas Gauquelin, and John Mangeri. Funding for the research program was provided by the European Research Council under Advanced Grant NEXUS alongside the Villum Investigator Grant EUREKA. In the formal disclosure statement, the participating authors stated that they have no competing interests.

The material foundation of the experiment relied on oxide membranes, which are freestanding crystalline sheets composed of oxygen and other constituent elements. The researchers selected strontium titanate, designated chemically as SrTiO3, a hard and chemically stable compound frequently utilized as a standard model oxide in electronics research. Each sheet fabricated for the investigation measured approximately ten nanometres in thickness, where one nanometre represents one billionth of a metre. Producing these ultrathin membranes required extensive preparatory development at the Technical University of Denmark. Professor Nini Pryds explained that the team spent years mastering how to synthesize high-quality crystalline sheets, align them precisely, bond them securely, and twist them, establishing the strong bonding required to examine directly what occurs where the two crystal layers meet.

A structural illustration created by John Mangeri illustrates how the stacked sheets reorganize at the contact boundary. In the diagram, two ultrathin crystal layers are depicted as blue and red atoms rotated relative to each other. When strong bonding takes place between the layers, their atoms rearrange into a square grid of defects in the crystal structure, highlighted by golden lines. This interface behavior differs from ordinary moiré geometry. When two mesh screens are placed crosswise and rotated slightly, a larger repeating moiré pattern appears naturally as the regular atomic structures of two crystal sheets overlap at an angle. However, strong bonding during twisting allows the interface atoms to adopt arrangements that fit together, gathering the remaining structural mismatch along narrow lines of distorted crystal known as screw dislocations.

The initial identification of this atomic rearrangement originated from simulations performed by William Sandholt during his doctoral research at the Technical University of Denmark. Utilizing a machine learning model, Sandholt calculated how atoms would move as the crystal sheets bonded and twisted. The resulting computational grid provided an explicit structural template for experimentalists to target in laboratory specimens. Nini Pryds highlighted that researchers would never have discovered the dislocations if these calculations had not predicted their existence. According to Pryds, the discovery emphasizes the power of combining theory and experiment, uniting investigators who synthesized the ultrathin sheets, assembled them with a controlled twist, simulated their atomic behavior, and characterized the resulting material.

Controlling the twist angle provides a direct method to tune the physical dimensions of the interface lattice. Joint first author William Sandholt stated that changing the twist angle changes the spacing between the dislocations, offering a way to regulate how small the structure becomes. In experimental trials, the research team observed clear dislocation networks when sheets were twisted at angles of 5 degrees, 7.5 degrees, and 10 degrees. In contrast, when the rotation was set to 20 degrees, the pronounced dislocation network was completely absent. The researchers explained that increasing the twist angle compresses the grid spacing, and at 20 degrees the distance between adjacent lines becomes too small to form the reconstructed dislocation network.

Further modeling showed that uneven mechanical distortions around the dislocation grid can slightly separate positive and negative electrical charges. This charge separation, termed polarisation, generates swirling configurations called polar vortices through a physical phenomenon known as flexoelectricity. The authors noted an essential methodological nuance: while electron microscopy signals substantiate the reconstructed atomic structure, interpreting its polar character relies upon theoretical modeling. To locate the buried grid, the team overcame transmission imaging challenges where the electron beam passes through ten nanometres of upper material, crosses the boundary, and traverses another ten nanometres. By modeling beam transmission and cutting cross-sectional specimens in multiple directions, collaborators at the University of Antwerp and the SuperSTEM Laboratory confirmed that the interfacial structure agreed almost perfectly with theory.

Looking ahead, the team wants to explore whether this approach can produce useful electrical behaviour in strontium titanate or other oxides. Although calculations predict electronic states concentrated near the grid, electrical conduction along its lines has not been demonstrated, and developing working devices will require further research.

Subject of Research: Atomic rearrangement and dislocation grid formation at twisted strontium titanate crystal interfaces

Article Title: Scientists make crystal layers assemble into a tiny grid

Article References: Scientists make crystal layers assemble into a tiny grid. Original publication (Bibliographic details unavailable.)

Image Credits: AI Generated

DOI: Not provided

Keywords: strontium titanate, SrTiO3, oxide membranes, screw dislocations, polar vortices, flexoelectricity, moiré patterns, twist angle, electron microscopy, machine learning simulations, polarisation, Technical University of Denmark, SuperSTEM Laboratory, University of Antwerp, perovskites, dislocation networks

Cite Scienmag News

Denise Maddox. (November 20, 2026). Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid. Scienmag. https://scienmag.com/bonded-and-twisted-crystal-sheets-form-controllable-square-defect-grid/

Denise Maddox. "Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid." Scienmag, 20 November 2026, https://scienmag.com/bonded-and-twisted-crystal-sheets-form-controllable-square-defect-grid/. Accessed 20 November 2026.

Denise Maddox. "Bonded and Twisted Crystal Sheets Form Controllable Square Defect Grid." Scienmag. November 20, 2026. https://scienmag.com/bonded-and-twisted-crystal-sheets-form-controllable-square-defect-grid/

Tags: dislocation networkselectron microscopyflexoelectricitymachine learning simulationsmoiré patternsoxide membranesPerovskitespolar vorticespolarisationscrew dislocationsSrTiO3strontium titanateSuperSTEM LaboratoryTechnical University of Denmarktwist angleUniversity of Antwerp
Share26Tweet16
Previous Post

Public Health Engagement Must Move Beyond Reactive Misinformation Debunking in Africa

Next Post

Deep Learning EEG Models Detect Autism Accurately but Lack Clinical Validation

Related Posts

Copper Metal-Organic Framework Enables Sensitive Fluorescence Enhancement Sensor for Glyphosate Detection
Technology and Engineering

Copper Metal-Organic Framework Enables Sensitive Fluorescence Enhancement Sensor for Glyphosate Detection

November 20, 2026
Review Details AI Integration and Structural Trade-Offs in Autonomous Drone Design
Technology and Engineering

Review Details AI Integration and Structural Trade-Offs in Autonomous Drone Design

November 20, 2026
Multiphase Steel Bendability Depends on Interacting Microstructural and Sheet Thickness Scales
Technology and Engineering

Multiphase Steel Bendability Depends on Interacting Microstructural and Sheet Thickness Scales

November 20, 2026
Image-Text Alignment Improves Industrial Anomaly Detection in Multimodal Language Models
Technology and Engineering

Image-Text Alignment Improves Industrial Anomaly Detection in Multimodal Language Models

November 20, 2026
New Fixed Point Theorems Applied to Climate Dynamic Models in Metric Spaces
Technology and Engineering

New Fixed Point Theorems Applied to Climate Dynamic Models in Metric Spaces

November 20, 2026
Mutual Information Provides Multi-Scale Index for Measuring Demographic and Spatial Segregation
Technology and Engineering

Mutual Information Provides Multi-Scale Index for Measuring Demographic and Spatial Segregation

November 20, 2026
Next Post
Deep Learning EEG Models Detect Autism Accurately but Lack Clinical Validation

Deep Learning EEG Models Detect Autism Accurately but Lack Clinical Validation

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • Fieldwork Curriculum Links to Life Meaning Through Narrative Identity in Chinese Students
  • Taxonomists Identify Six New Spider Species in Ecuador’s Podocarpus National Park
  • Corticosteroids in Adult Immune Thrombocytopenia Require Time-Limited Regimens Prioritizing Bleeding Prevention
  • Bibliometric Study Shows Rising Research On Fungi And Hepatocellular Carcinoma

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,151 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading