Thursday, November 19, 2026
Science
No Result
View All Result
  • Login
  • HOME
  • SCIENCE NEWS
  • CONTACT US
  • HOME
  • SCIENCE NEWS
  • CONTACT US
No Result
View All Result
Scienmag
No Result
View All Result
Home Science News

Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing

November 19, 2026
in Science News
Denise Maddox
By Denise Maddox Scienmag Editorial Profile - Mechanical Engineering
Reading Time: 6 mins read
0
Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing

Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing

65
SHARES
587
VIEWS
Share on FacebookShare on Twitter
ADVERTISEMENT

Mechanical engineers and biomechanics researchers have fabricated three-dimensional printed rib bone surrogates using metal and photopolymer additive manufacturing processes to replicate the structural response of human ribs during dynamic impact events. In a laboratory investigation evaluated against post-mortem human subjects data, investigators extracted the anatomical geometry of the fifth rib from the Global Human Body Model Consortium male fiftieth percentile model and divided it into thirty cross-sectional zones. Across fifty-seven dynamic physical bending trials loaded at a constant cross-head velocity of five hundred millimetres per second, the resulting structural curves revealed key differences from human tissue while highlighting specific engineering formulations that aligned closely with adult corridors.

Developing personal protective equipment for ballistic threats and forensic analysis requires an accurate understanding of how the thorax responds to dynamic impact. Traditional evaluation systems have relied heavily on static back-face deformation measurements in clay, such as the forty-four-millimetre limit established by the United States Department of Justice in Roma Plastilina. However, such static indentations fail to correlate directly with physiological skeletal fractures, soft tissue trauma, or dynamic anatomical failure modes. Furthermore, conventional automotive anthropomorphic test devices were configured for predefined standardized vehicular crashes rather than the localised, high-rate loads induced by ballistic impacts or body armour deformation.

To overcome the geometrical and material deficits of existing anthropomorphic test surrogates, the investigators focused specifically on the left fifth rib. This anatomical location is extensively documented in biomechanical literature and sits adjacent to the sternum where central thoracic impacts are commonly evaluated. Finite element models often capture global crash responses, but physical surrogates require precise geometrical scaling and appropriate material constitutive behaviour to yield comparable fracture mechanics. The CAD model developed for this study integrated cortical thicknesses across cutaneous, pleural, caudal, and cranial directions based on adult post-mortem subject measurements reported in anatomical literature.

The experimental matrix incorporated three distinct additive manufacturing technologies to address different material classes and fabrication tolerances. Direct metal laser melting on an EOS M 400 platform was employed to print metallic surrogates using Scalmalloy, an aluminium-magnesium-scandium alloy with specific powder particle size distributions. Powder bed fusion allowed exact one-to-one reproduction of cortical wall thicknesses without internal support structures. In parallel, fused filament fabrication using a Markforged system produced specimens from Onyx, a micro-carbon-fibre-filled polyamide, while multi-jet modeling systems manufactured photopolymer specimens from BoneMatrix-clear, BoneMatrix-magenta, and VeroCyan resins across varying wall thickness profiles.

Physical structural evaluation was conducted on an Instron servohydraulic testing machine outfitted with a ten-kilonewton Dynacell load cell. The vertebral and sternal ends of each rib specimen were cast into polyurethane resin inside aluminium cylinders, with the longitudinal axis aligned along the horizontal plane. While the sternal end was displaced along the primary axis with rotational freedom about the bending axis to replicate frontal thoracic impact, the vertebral fixture remained fully constrained. High-speed digital image correlation recorded deformation and principal strain fields at three thousand frames per second across front and rear surfaces.

Strain analysis demonstrated distinct mechanical variations between the outer cutaneous surface and the inner pleural surface during dynamic bending. The cutaneous side experienced tensile loading oriented toward the optical recording cameras, whereas the pleural side experienced compression and rotational movement away from the imaging axis. Across the tested specimens, peak tensile strains concentrated between seventy and seventy-five percent of the total rib curvature length. This localized strain concentration corresponded directly with the transition zones where measured cortical bone thicknesses systematically decreased along the anatomical contour.

Mechanical testing revealed that material ductility played a decisive role in structural response and failure mechanics. The aluminium alloy Scalmalloy displayed higher tensile strength and yield properties than biological cortical bone, resulting in failure behaviour that was overly ductile compared to human tissue corridors. Heat treatment applied to select metal specimens at approximately five hundred and ninety-eight Kelvin reduced overall specimen strength rather than reinforcing the thin-walled geometry. Fused filament fabrication specimens composed of Onyx tracked the lower boundaries of adult force-displacement corridors, although internal non-removable support structures influenced the overall specimen compliance.

Among the photopolymer materials processed via multi-jet modeling, only the VeroCyan resin exhibited a brittle fracture pattern that closely matched the force-displacement curve shapes and peak failure forces documented for human ribs. Specimens fabricated from BoneMatrix exhibited comparatively flat response curves up to fifteen percent displacement before failing in a ductile mode, except for the thickest clear formulations. However, the VeroCyan specimens consistently failed prematurely at the boundary clamp interface, indicating stress concentrations that require local geometrical reinforcement at the vertebral and sternal fixtures.

Direct comparisons between the printed surrogates and historical post-mortem human subject data revealed important experimental boundaries. The surrogate dynamic tests were conducted at a displacement rate of zero point five metres per second due to machine loading limits, whereas comparative human subject data in the literature were generated at dynamic rates of two metres per second. In addition, the human compact bone matrix exhibits strain-rate hardening where yield and ultimate strengths increase under dynamic loading, whereas metallic and polymeric alternatives frequently show distinct or inverse strain-rate sensitivity.

The study also intentionally omitted the porous inner trabecular bone core, producing hollow surrogate shells defined solely by the outer cortical boundary. While trabecular bone possesses lower structural stiffness than compact cortical bone, its presence may alter local buckling resistance and energy absorption under severe bending loads. The researchers concluded that direct metal laser melting offers the resolution necessary to replicate fine cortical variations, while hybrid approaches incorporating polymeric cores or resin-infiltrated structures could provide the brittle fracture characteristics necessary for advanced anthropomorphic test devices.

A critical consideration in interpreting structural rib responses is understanding how human biological properties vary across demographics and age brackets. Previous biomechanical literature demonstrates that rib cortical bone properties change substantially across an individual’s lifetime, alongside variations driven by sex, stature, body mass index, and cross-sectional cortical thickness. In establishing baseline corridors for evaluation, the research team reprocessed experimental literature focused on twenty-two to forty-year-old male post-mortem human subjects. According to biomechanical literature, this demographic bracket exhibits peak structural properties because younger skeletons have not reached full skeletal maturity, while subjects aged forty-one to sixty and sixty-one and older experience progressive age-related degradation. Compiling unmixed, explicit data sets from this mature cohort provided a defined benchmark to evaluate whether additive manufacturing techniques could match peak biological performance.

The physical geometry of the surrogate design was constructed by sectioning the rib into thirty discrete zones, each defined using mathematical spline curves informed by multi-scale imaging data of human ribs. Previous anatomical mapping over complete rib arches from post-mortem subjects provided direct measurements of cortical thickness across cutaneous, pleural, caudal, and cranial boundaries. Translating these intricate anatomical profiles into additive manufacturing required modifying model dimensions to account for the unique fabrication constraints of each printing system. While direct metal laser melting demonstrated the dimensional accuracy required to reproduce cortical wall variations down to approximately one hundred micrometres on a direct scale, polymer extrusion and jetting technologies required scaled modifications ranging from models mod.-1.4 to mod.-2.0 to ensure continuous deposition without structural failure.

Fabrication parameter variations also played a decisive role in the final mechanical performance of the metallic specimens. Direct metal laser melting utilized Scalmalloy powder with measured particle size distributions of approximately twenty micrometres at the tenth percentile, thirty-six micrometres at the median, and fifty-four micrometres at the ninetieth percentile. Production settings altered laser power, scanning speed, track distance, and exposure routines, which directly govern evolving microstructural characteristics. Although external supports maintained alignment and dissipated heat before being removed, un-melted internal powder was evacuated using pressurized air, leaving unsupported hollow interior chambers. Post-build thermal treatment evaluated on selected metal samples demonstrated that thermal stress-relief cycles can induce adverse weakening effects in thin-walled tubular geometries, underscoring the sensitivity of additive metallic rib architectures to post-processing thermal cycles.

For the polymer printing processes, support structures and exposure dynamics introduced further structural variations. In fused filament fabrication of the carbon-fibre-reinforced polyamide, internal support material generated by the single-nozzle system could not be extracted from the closed rib cavity, altering internal compliance and contributing to the overly ductile load curves. In multi-jet modeling, liquid photopolymer droplets were instantly cured under print-head ultraviolet lamps, where exposure duration and illumination intensity determined final polymer cross-linking. The VeroCyan formulation utilized dual-lamp exposure that fostered higher curing intensity and produced brittle failure behaviour, whereas BoneMatrix resins under standard factory curing protocols exhibited lower structural stiffness and pronounced ductility.

Optical deformation measurements obtained via high-speed digital image correlation provided precise quantifications of local dynamic strain behaviour. High-speed recordings captured at five pixels per millimetre resolution tracked surface speckle displacement across thirty to seventy-five percent of the total rib curvature length. Across the tensile cutaneous face, the average calculated strain rate reached 13.8 plus or minus 1.01 hundredths per second. In addition to measuring principal strains, researchers established a designated necking point of interest at the site of maximum strain for each specimen. These optical strain maps confirmed that geometric thinning along the outer rib arch dictates localized necking and ultimate failure, providing crucial baseline metrics for refining future multi-material physical surrogates.

Subject of Research: Biomechanical evaluation of additively manufactured rib bone surrogates under dynamic impact loading

Article Title: Developing Rib Bone Surrogates for High Dynamic Impact Assessment with Additive Manufacturing and Post-mortem Human Subjects (PMHS)-Based Evaluation

Article References: Jenerowicz, M., Haase, T., Linnenberg, M., Musienko, E., Hoschke, K., Boljen, M., & Hiermaier, S. (2024). Developing Rib Bone Surrogates for High Dynamic Impact Assessment with Additive Manufacturing and Post-mortem Human Subjects (PMHS)-Based Evaluation. Human Factors and Mechanical Engineering for Defense and Safety, 8(1), Article 2. https://doi.org/10.1007/s41314-024-00065-y

Image Credits: AI Generated

DOI: 10.1007/s41314-024-00065-y

Keywords: additive manufacturing, biomechanics, rib bone surrogates, dynamic impact, anthropomorphic test devices, personal protective equipment, Scalmalloy, direct metal laser melting, fused filament fabrication, multi jet modeling, digital image correlation, cortical bone, thoracic impact, post-mortem human subjects, force displacement curves

Cite Scienmag News

Denise Maddox. (November 19, 2026). Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing. Scienmag. https://scienmag.com/additive-manufacturing-yields-3d-printed-rib-bone-surrogates-for-dynamic-impact-testing/

Denise Maddox. "Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing." Scienmag, 19 November 2026, https://scienmag.com/additive-manufacturing-yields-3d-printed-rib-bone-surrogates-for-dynamic-impact-testing/. Accessed 19 November 2026.

Denise Maddox. "Additive Manufacturing Yields 3D-Printed Rib Bone Surrogates for Dynamic Impact Testing." Scienmag. November 19, 2026. https://scienmag.com/additive-manufacturing-yields-3d-printed-rib-bone-surrogates-for-dynamic-impact-testing/

Tags: additive manufacturinganthropomorphic test devicesbiomechanicscortical bonedigital image correlationdirect metal laser meltingdynamic impactforce displacement curvesfused filament fabricationmulti jet modelingpersonal protective equipmentpost-mortem human subjectsrib bone surrogatesScalmalloythoracic impact
Share26Tweet16
Previous Post

Scalp Sebaceous Glands Lose Key DHT-Inactivating Enzymes During Aging

Next Post

SAMD5 Gene Interacts With Sun Exposure to Influence Facial Wrinkle Formation

Related Posts

Trial Tests Feasibility of Subsidized Recipe Boxes for UK School Households
Science News

Trial Tests Feasibility of Subsidized Recipe Boxes for UK School Households

November 19, 2026
Combined Beneficial Bacteria and Nanoparticles Shield Sorghum From Drought and Lead Toxicity
Science News

Combined Beneficial Bacteria and Nanoparticles Shield Sorghum From Drought and Lead Toxicity

November 19, 2026
Financial Allowances Most Effectively Drive Employee Decisions to Work from Home
Science News

Financial Allowances Most Effectively Drive Employee Decisions to Work from Home

November 19, 2026
Salvianolic Acid C Blocks Influenza Virus Release by Targeting Viral Neuraminidase
Biology

Salvianolic Acid C Blocks Influenza Virus Release by Targeting Viral Neuraminidase

November 19, 2026
Cross-Sectional Study Identifies Knowledge Gaps and Practice Predictors in Obstructive Sleep Apnea
Medicine

Cross-Sectional Study Identifies Knowledge Gaps and Practice Predictors in Obstructive Sleep Apnea

November 19, 2026
Transient Retinal Infiltrates in Behçet Uveitis Frequently Mimic Infectious Disease
Medicine

Transient Retinal Infiltrates in Behçet Uveitis Frequently Mimic Infectious Disease

November 19, 2026
Next Post
SAMD5 Gene Interacts With Sun Exposure to Influence Facial Wrinkle Formation

SAMD5 Gene Interacts With Sun Exposure to Influence Facial Wrinkle Formation

  • Mothers who receive childcare support from maternal grandparents show more optimized

    Mothers who receive childcare support from maternal grandparents show more parental warmth, finds NTU Singapore study

    27656 shares
    Share 11059 Tweet 6912
  • University of Seville Breaks 120-Year-Old Mystery, Revises a Key Einstein Concept

    1061 shares
    Share 424 Tweet 265
  • Bee body mass, pathogens and local climate influence heat tolerance

    682 shares
    Share 273 Tweet 171
  • Researchers record first-ever images and data of a shark experiencing a boat strike

    546 shares
    Share 218 Tweet 137
  • Groundbreaking Clinical Trial Reveals Lubiprostone Enhances Kidney Function

    531 shares
    Share 212 Tweet 133
Science

Embark on a thrilling journey of discovery with Scienmag.com—your ultimate source for cutting-edge breakthroughs. Immerse yourself in a world where curiosity knows no limits and tomorrow’s possibilities become today’s reality!

RECENT NEWS

  • Trial Tests Feasibility of Subsidized Recipe Boxes for UK School Households
  • Combined Beneficial Bacteria and Nanoparticles Shield Sorghum From Drought and Lead Toxicity
  • Financial Allowances Most Effectively Drive Employee Decisions to Work from Home
  • Salvianolic Acid C Blocks Influenza Virus Release by Targeting Viral Neuraminidase

Categories

  • Agriculture
  • Anthropology
  • Archaeology
  • Athmospheric
  • Biology
  • Biotechnology
  • Blog
  • Bussines
  • Cancer
  • Chemistry
  • Climate
  • Earth Science
  • Editorial Policy
  • Marine
  • Mathematics
  • Medicine
  • Pediatry
  • Policy
  • Psychology & Psychiatry
  • Science Education
  • Science News
  • Social Science
  • Space
  • Technology and Engineering

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 5,151 other subscribers

© 2026 Scienmag - Science Magazine

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • HOME
  • SCIENCE NEWS
  • CONTACT US

© 2026 Scienmag - Science Magazine

Discover more from Science

Subscribe now to keep reading and get access to the full archive.

Continue reading