A research team led by Ziran Chen has demonstrated a novel displacement sensing method that leverages a spherical array mechanical structure and time-grating technology to achieve micrometer-level measurement accuracy over a range of 512 millimeters. Published in the journal Nanomanufacturing and Metrology, the study details a sensor prototype capable of delivering high-precision linear position feedback even in environments typically prone to heavy oil contamination and dense industrial dust. By utilizing a radial magnetic field to establish the mapping correlation between spatial displacement and time reference, the prototype demonstrated a corrected measurement error of within ± 8.58 μm.
Precision displacement detection technology and its associated sensors have become core components in high-end computer numerical control (CNC) machine tools, aerospace, military, and robotic automation systems. Currently, optical linear encoders remain the industry standard for high-precision feedback due to their high resolution and stability. However, these systems rely on ultraprecision photolithography to create grating lines and electronic interpolation technology to parse the resulting signals. As a result, they are inherently fragile, particularly in the presence of cutting fluid splashes, metal dust, and oil. To maintain suitable operating conditions, they require enclosed mechanical structures equipped with complex positive-pressure air purging systems.
Magnetic linear encoders provide a more resilient option, as they are largely impervious to industrial debris. Systems such as the BML SF2 series are widely employed for large-range measurements; however, they face a ceiling on achievable precision due to the inherent physical limitations of the magnetic materials used. While SPHEROSYN ball grid rulers use a precision steel ball array as a position scale, they generally rely on amplitude-modulated measurement principles. These signals are susceptible to spatial magnetic field distortions, mechanical vibrations, and installation air gap fluctuations, making it difficult to further enhance their measurement accuracy and resolution. The proposed spherical array time-grating method seeks to bridge this gap by combining the fully enclosed structure of a ball grid ruler with the phase-based precision characteristic of time-grating technology.
The physical architecture of the sensor consists of two primary components: a stator and a mover. The stator is constructed from a nonmagnetic substrate that houses a high-precision array of steel balls, each with a diameter of 16 mm. These balls act as a periodic medium for modulating the radial magnetic field. The mover, which sits coaxially over the stator, contains the excitation and induction windings, as well as a magnetic yoke formed from high-permeability material. This yoke is essential for constraining the magnetic field lines, thereby reducing the magnetic reluctance of the circuit and minimizing the impact of electromagnetic leakage. Because both components are fully enclosed, the design provides a barrier against contaminants without the need for supplementary air-purging systems.
The measurement principle relies on generating an alternating magnetic field that is distributed along the radial direction of the ball array. As the mover translates axially relative to the stator, the volumetric ratio between the steel balls and the air gaps within the winding coverage area changes periodically. This variation in magnetic media alters the equivalent permeability of the local circuit, inducing a periodic change in the magnetic flux sensed by the induction windings. The resulting output is a traveling wave signal where the displacement information is encoded into the phase of the signal rather than the amplitude.
The phase-modulated approach is fundamentally different from traditional amplitude-based sensors, offering significant advantages in stability. Because the measurement result depends primarily on the phase of the induced signal and the accuracy of its zero-crossing points, the system remains largely insensitive to fluctuations in the signal amplitude caused by installation variations or environmental interference. The displacement x is calculated using the phase difference Δφ between the output traveling wave signal and a reference signal, according to the linear relationship x = (W/2π)Δφ, where W is the spatial period defined by the steel ball diameter. This relationship ensures that the precision of the measurement is tied to the timing accuracy of the signal, which can be precisely controlled through high-frequency digital interpolation.
To convert the phase information into usable displacement data, the team integrated a digital demodulation system based on a field-programmable gate array (FPGA). Excitation signals are generated using a D/A converter and filtered before being applied to the windings. The induction windings capture the modulated magnetic field and output two standing wave signals, which are combined into a single traveling wave. This signal undergoes amplification, filtering, and conversion via a zero-crossing comparator into a square wave. A high-frequency 1.6 GHz clock pulse is then used to measure the time interval between the square wave signal and a reference pulse. The displacement is computed by combining the integer period count N with the time-domain interpolation fraction ΔT/T, allowing for high spatial resolution without the need for traditional electronic interpolation.
Finite element simulations were conducted to refine the sensing model and analyze its feasibility. By modeling 41 different spatial positions, the researchers examined the induced voltage waveforms and their spectral components. The analysis revealed that the initial measurement error was dominated by low-order harmonics—specifically the first-, second-, and third-order components. These inaccuracies were attributed to edge effects at the boundaries of the steel balls, where the magnetic field lines bend, and to magnetic flux leakage that occurs when the field lines are not entirely captured by the ball array. These findings were critical in optimizing the geometry of the sensor, as they identified the specific geometric configurations—such as the circumferential span of the windings—that minimize these harmonic distortions.
The team performed an extensive parametric study to optimize the sensor’s measurement performance, focusing on the circumferential spans of the winding coils and the magnetic yoke. Simulations with spans ranging from 11π/6 to 55π/6 mm showed that error peak-to-peak values followed a non-monotonic trend. Excessively small spans resulted in significant magnetic field gradients, while overly large spans introduced higher levels of stray magnetic flux leakage. Ultimately, a span of 11π/2 mm was identified as the optimal configuration, minimizing measurement errors while also easing the installation of the flexible printed circuit (FPC) coils. Similarly, the study evaluated the air gap height, finding that increased gaps introduced nonlinearities that degraded the fundamental sinusoidal permeance characteristic, leading to higher-order harmonic errors. This underscored the importance of keeping the winding radius as small as mechanically feasible during the fabrication process.
To evaluate the impact of real-world manufacturing limitations, the team investigated coaxiality deviations and ball diameter tolerances. Simulations introducing radial eccentricities of up to 0.3 mm indicated that such assembly errors increased the amplitudes of the first- and second-order harmonics. Despite these challenges, the system showed resilience, with the overall measurement trends remaining consistent. The prototype experiments used G16-grade standard steel balls, selected for their uniform diameter, to assemble a 512-mm long linear sensor. Tests were carried out using a Zhongtu Instruments SJ6000 laser interferometer as a reference, confirming that the sensor could maintain high accuracy across a 32-pole-pitch travel range.
Experimental results demonstrated that the original measurement error across the 512 mm full-scale range did not exceed ± 48.38 μm. Given the highly periodic nature of this error, the researchers implemented a Fourier harmonic correction algorithm on the host computer. By identifying and compensating for the dominant harmonics—the 32nd, 64th, and 96th orders—they significantly improved the system’s performance. The corrected measurement error was reduced to within ± 8.58 μm. The 64th-order harmonic, identified as the primary source of error, originated from edge-of-ball magnetic field bending, while the 32nd-order harmonic was linked to residual magnetic leakage that the radially symmetric arrangement could not fully eliminate.
A final stability experiment was conducted by holding the mover stationary at a fixed position and sampling data at 2-second intervals. Over 400 data points, the stability fluctuation remained within 0.4 μm, demonstrating that the system possesses a strong baseline for industrial precision. Compared to traditional sensors, the proposed method offers unique advantages, particularly in thermal stability. The stator’s construction uses materials with thermal expansion characteristics that align closely with standard machine tool structural steel, ensuring consistent operation under the dynamic thermal conditions often found in high-throughput CNC machining centers. This robust performance, coupled with the modular potential of the stator design, allows the sensor’s measurement range to be scaled easily by adding more steel ball segments.
In summary, the study validates a high-precision, phase-modulated displacement sensing method that remains effective even in harsh, contaminated industrial environments. By leveraging the time-grating principle to establish a mapping between physical displacement and a time-based reference, the sensor achieves micrometer-level accuracy without relying on the delicate photolithographic gratings required by optical encoders. In further research, the authors plan to adopt higher-precision steel balls to develop displacement sensors with improved measurement accuracy for applications such as heavy-duty industrial robots and wet CNC machining centers.
Subject of Research: Development and validation of a high-precision spherical array time-grating displacement sensor for harsh industrial environments.
Article Title: A Time-Grating Displacement Sensor with Spherical Array Structure Based on a Radial Magnetic Field
Article References: Chen, Z., Shi, L., Liu, C., Wu, B., Zhang, Z., He, Z., & Yang, X. (2026). A Time-Grating Displacement Sensor with Spherical Array Structure Based on a Radial Magnetic Field. Nanomanufacturing and Metrology, 9(1), Article 23. https://doi.org/10.1007/s41871-026-00307-x
Image Credits: AI Generated
DOI: 10.1007/s41871-026-00307-x
Keywords: displacement sensor, time-grating technology, radial magnetic field, spherical array structure, industrial metrology, micrometer precision, CNC machine tools, sensor robustness, magnetic reluctance, harmonic error correction, FPGA signal demodulation, linear encoder, nonmagnetic substrate, high-permeability yoke, phase-based measurement, nanomanufacturing, robotic automation
Cite Scienmag News
Scienmag. (November 18, 2026). Spherical Array Time-Grating Sensor Prototype Achieves Micrometer-Level Accuracy Across 512 Millimeters. https://scienmag.com/spherical-array-time-grating-sensor-prototype-achieves-micrometer-level-accuracy-across-512-millimeters/
Scienmag. "Spherical Array Time-Grating Sensor Prototype Achieves Micrometer-Level Accuracy Across 512 Millimeters." Scienmag, 18 November 2026, https://scienmag.com/spherical-array-time-grating-sensor-prototype-achieves-micrometer-level-accuracy-across-512-millimeters/. Accessed 18 November 2026.
Scienmag. "Spherical Array Time-Grating Sensor Prototype Achieves Micrometer-Level Accuracy Across 512 Millimeters." Scienmag. November 18, 2026. https://scienmag.com/spherical-array-time-grating-sensor-prototype-achieves-micrometer-level-accuracy-across-512-millimeters/








