In a survey paper assessing multiphase nozzle flows, researchers observed that uncertainty in solid rocket motor performance predictions increases markedly when modeling larger condensed particles across different constitutive drag laws. The flow field predictions obtained from various drag models became increasingly discrepant whenever particles encountered higher relative Mach numbers inside a high area ratio nozzle. This growing divergence between models stemmed from greater disparity in the compressible regime combined with substantial amplification caused by high relative velocities.
The underlying multiphase dynamics in solid rocket motor nozzles utilizing aluminized propellants are defined by pronounced thermal and kinetic variations. Within these systems, the accelerating flow field consists of expanding hot gases mixed with condensed aluminum and aluminum oxide particles. The physical density ratio of the condensed particles relative to the surrounding gas phase is typically of the order of a few thousand, while their corresponding volume fraction remains on the order of 10^-4.
Instead, momentum transfer between the gas and particulate phases is modeled through constitutive drag laws formulated for isolated rigid spheres moving through a fluid flow. Over time, investigators in solid rocket propulsion literature have developed numerous drag laws with differing levels of mathematical and physical complexity to describe the dynamic behavior of such isolated spheres under high-speed conditions.
To evaluate how the selection of a specific formulation alters flow field and propulsion estimates, the investigation systematically compared various drag models documented across solid rocket propulsion literature. This comparative evaluation also incorporated recently developed advanced drag models alongside established historical formulations. The central objective focused on determining how the choice among these diverse drag formulations influences predictions of the motor flow field and the overall specific impulse in a high area ratio solid rocket motor nozzle.
The modeling comparison evaluated the performance of these drag formulations across uniform-sized particles with specific diameters of 1, 2, 10, and 20 micrometers within the nozzle flow. Larger particles exhibited a greater susceptibility to higher relative Mach numbers, directly linking particle size to the magnitude of differences observed among the tested models.
The resulting divergence in nozzle flow field calculations revealed two clear physical drivers under high relative Mach numbers. First, different drag models exhibit greater inherent disparity when operating within the compressible flow regime. Second, these foundational differences undergo greater amplification because of the high relative velocities between the accelerating gas and the suspended particles. Consequently, because larger particles systematically experience these higher relative Mach numbers, the overall uncertainty in solid rocket motor performance and specific impulse predictions increases with increasing particle size.
Subject of Research: Gas-particle drag model comparison in solid rocket motor nozzles
Article Title: Comparison of Drag Models for Gas-Particle Flows in Solid Rocket Motor Nozzles
Article References: Srivastava, N., & Jayachandran, T. (2026). Comparison of Drag Models for Gas-Particle Flows in Solid Rocket Motor Nozzles. International Journal of Aeronautical and Space Sciences. https://doi.org/10.1007/s42405-026-01301-9
Image Credits: AI Generated
DOI: 10.1007/s42405-026-01301-9
Keywords: solid rocket motors, drag models, gas-particle flows, nozzle flow field, aluminized propellants, specific impulse, relative Mach number, particle diameter, compressible regime, aluminum oxide particles, aluminum particles, constitutive drag laws, high area ratio nozzles, density ratio, volume fraction, performance prediction uncertainty, high relative velocity
Cite Scienmag News
Grant Pearson. (November 18, 2026). Larger Particle Sizes Increase Performance Prediction Uncertainty in Solid Rocket Motors. Scienmag. https://scienmag.com/larger-particle-sizes-increase-performance-prediction-uncertainty-in-solid-rocket-motors/
Grant Pearson. "Larger Particle Sizes Increase Performance Prediction Uncertainty in Solid Rocket Motors." Scienmag, 18 November 2026, https://scienmag.com/larger-particle-sizes-increase-performance-prediction-uncertainty-in-solid-rocket-motors/. Accessed 18 November 2026.
Grant Pearson. "Larger Particle Sizes Increase Performance Prediction Uncertainty in Solid Rocket Motors." Scienmag. November 18, 2026. https://scienmag.com/larger-particle-sizes-increase-performance-prediction-uncertainty-in-solid-rocket-motors/








