A recent study published in Frontiers in Earth Science introduces a novel method for identifying injection profiles in water-injection wells using distributed temperature sensing (DTS). Traditional fine-scale inversion techniques for monitoring injection profiles often rely heavily on prior parameters and involve significant computational complexity, which can limit their practical efficiency. To address these challenges, researchers developed a relative injection profile identification method constrained by a wellbore temperature response model. By integrating temperature propagation characteristics captured during water injection with data from post-shut-in thermal recovery, the approach establishes specific characteristic parameters for automated boundary identification of injection intervals.
The methodology relies on three key parameters—cumulative cooling, threshold arrival time, and residual cooling—to systematically delineate the main injection interval and key contributing intervals within a wellbore. The study utilized data from two field applications, Well HD01 and Well HD02, to evaluate the effectiveness of the model. In the case of Well HD01, researchers determined the lower limit of effective injection to be approximately 2,129.0 meters. The main injection interval was identified as extending from 1,843.0 meters to 2,075.5 meters, with a key contributing interval located near 1,969.0 meters.
A critical component of the validation process involved analyzing the robustness of the proposed method against parameter uncertainty. The researchers performed an uncertainty analysis, which demonstrated that both global and local perturbations of model parameters had limited influence on the identification results. Furthermore, the team assessed the stability of the interpreted relative injection profile under varying levels of temperature noise. The results indicated that the interpreted profiles remained stable provided that the standard deviation of the temperature noise did not exceed 1.0 °C.
When compared to conventional inversion methods, the new DTS-based approach demonstrated strong consistency in the macroscopic delineation of main injection intervals. Importantly, it also provided a more refined identification of key contributing intervals, offering a more granular view of the injection process.
The study also examined the cross-well applicability of the method using data from Well HD02. In this application, researchers were able to successfully identify the main injection interval using only DTS data collected during the injection period, even in the absence of stable post-shut-in thermal recovery observations. This finding is significant as it suggests that the method maintains diagnostic value in operational scenarios where complete shut-in data may not be available or practical to obtain, thereby increasing the potential for broader engineering deployment.
The research represents a step toward reducing the reliance on prior parameters while simultaneously lowering the computational overhead associated with conventional inversion, paving the way for more automated and refined wellbore monitoring practices in the field.
Subject of Research: Georeservoir engineering and distributed temperature sensing for water-injection well monitoring.
Article Title: A relative injection profile identification method based on distributed temperature sensing
Article References: Cong, L., Lu, J., Chen, J., Lai, P., & Xue, J. (2026). A relative injection profile identification method based on distributed temperature sensing. Frontiers in Earth Science, 14, Article 1991982. https://doi.org/10.3389/feart.2026.1991982
Image Credits: AI Generated
DOI: 10.3389/feart.2026.1991982
Keywords: Distributed temperature sensing, Injection profile identification, Water-injection wells, Wellbore temperature response, Reservoir management, Thermal recovery, Inversion modeling, Georeservoirs, Subsurface monitoring, Fluid injection, Data robustness, Parameter uncertainty, Geoscience technology, Wellbore logging, Automated identification
Cite Scienmag News
Violet Maxwell. (November 17, 2026). New Temperature Sensing Method Improves Precision in Water Injection Profile Mapping. Scienmag. https://scienmag.com/new-temperature-sensing-method-improves-precision-in-water-injection-profile-mapping/
Violet Maxwell. "New Temperature Sensing Method Improves Precision in Water Injection Profile Mapping." Scienmag, 17 November 2026, https://scienmag.com/new-temperature-sensing-method-improves-precision-in-water-injection-profile-mapping/. Accessed 17 November 2026.
Violet Maxwell. "New Temperature Sensing Method Improves Precision in Water Injection Profile Mapping." Scienmag. November 17, 2026. https://scienmag.com/new-temperature-sensing-method-improves-precision-in-water-injection-profile-mapping/








