Published as a brief research report in the foams section of Frontiers in Soft Matter, the investigation was conducted by Angelos T. Zamanis, Sotiris P. Evgenidis, Thodoris D. Karapantsios, and Margaritis Kostoglou from the Aristotle University of Thessaloniki in Greece. Their multimodal diagnostic approach establishes an operational rupture endpoint for simplified food and beverage formulations.
The underlying physical stability of food and beverage foams depends partly on microscopic liquid connections that continuously thin, rupture, and reorganize around expanding gas domains. However, standard laboratory monitoring faces a fundamental ambiguity: a change in an electrical or pressure signal alone does not uniquely identify the underlying failure event. By combining synchronized physical sensor tracks with optical verification, the researchers sought to resolve these complex connectivity transitions and eliminate reliance on non-unique instrument responses.
To validate this diagnostic methodology, the study was organized into two distinct experimental stages focusing on bubble mechanics and bridge withdrawal dynamics. Stage 1 examined bubble-driven connectivity events across four carefully selected model fluids: filtered water, 50 parts per million sodium dodecyl sulfate (SDS), 0.3 percent volume-by-volume ethanol, and a combined SDS and ethanol mixture.
In a representative water cycle during Stage 1 testing, visible gas entry accompanied a sudden pressure release alongside an approximately 31 percent decrease in apparent conductance. Crucially, the synchronized recordings revealed that apparent conductance continued falling even after the primary pressure transition had fully concluded.
Building upon these dynamic observations, Stage 2 introduced an optically defined rupture endpoint during controlled liquid withdrawal from 20-microliter bridges. The experimental protocol evaluated four distinct formulations: pure filtered water, water mixed with sucrose, water combined with instant coffee, and a mixture containing both instant coffee and sucrose. To account for experimental variability, the researchers tested six independent preparations for each formulation under standardized withdrawal conditions.
The resulting measurements demonstrated substantial differences in bridge persistence, expressed as mean rupture times plus or minus sample standard deviation across the six preparations. Pure filtered water ruptured most rapidly, recording a mean time of 2.3 ± 1.86 seconds, while the addition of sucrose extended bridge persistence to 17.0 ± 1.79 seconds. The formulation combining water and instant coffee reached a mean rupture time of 25.0 ± 2.37 seconds, and the coffee plus sucrose mixture exhibited the longest stability at 30.2 ± 1.72 seconds.
The authors emphasize that these measured withdrawal values represent protocol-specific endpoints rather than comprehensive rankings of commercial foam performance or proof of specific physicochemical mechanisms.
Subject of Research: Multimodal identification of connectivity transitions and rupture in liquid bridges
Article Title: Multimodal identification of bubble-induced connectivity loss in electrode-supported liquid bridges: application to simplified food formulations
Article References: Zamanis, A. T., Evgenidis, S. P., Karapantsios, T. D., & Kostoglou, M. (2026). Multimodal Identification of Bubble-Induced Connectivity Loss in Electrode-Supported Liquid Bridges: Application to Simplified Food Formulations. Frontiers in Soft Matter, 6, 1992180. https://doi.org/10.3389/frsfm.2026.1992180
Image Credits: AI Generated
DOI: 10.3389/frsfm.2026.1992180
Keywords: apparent conductance, upstream gas-line pressure, optical imaging, liquid bridges, electrode-supported liquid bridge, connectivity loss, bubble dynamics, rupture endpoint, controlled withdrawal, food foams, beverage formulations, instant coffee, sucrose, sodium dodecyl sulfate, ethanol, interfacial systems, Aristotle University of Thessaloniki
Cite Scienmag News
Ophelia Keating. (November 17, 2026). Synchronized Sensing Resolves Connectivity Loss in Electrode-Supported Liquid Bridges. Scienmag. https://scienmag.com/synchronized-sensing-resolves-connectivity-loss-in-electrode-supported-liquid-bridges/
Ophelia Keating. "Synchronized Sensing Resolves Connectivity Loss in Electrode-Supported Liquid Bridges." Scienmag, 17 November 2026, https://scienmag.com/synchronized-sensing-resolves-connectivity-loss-in-electrode-supported-liquid-bridges/. Accessed 17 November 2026.
Ophelia Keating. "Synchronized Sensing Resolves Connectivity Loss in Electrode-Supported Liquid Bridges." Scienmag. November 17, 2026. https://scienmag.com/synchronized-sensing-resolves-connectivity-loss-in-electrode-supported-liquid-bridges/








