What the smell can tell

Breath analysis in disease diagnostics is a promising research field, and the advances in instrumentation allows the accurate detection of metabolites. But not only the health status of patients, but also the preservation status of museum artifacts could be monitored. In their publication in Angewandte Chemie, heritage science researchers have investigated emissions of volatile organic compounds from plastics-based art objects and provided a first calibration scheme for polymer degradation in museum environment.

Everyone is familiar with the detection of volatile organic compounds (VOCs). They can be sensed by the nose and tongue, indicating several aspects of the current state of the emitting system–be it the mown grass in the backyard, the level of maturation of cheese or decay in fish, or even if a patient suffers from diabetes. But the emittance of marker chemicals is not restricted to living systems. Volatile degradation products can also be detected for polymers. Since the beginning of the 20th century, many plastics-based objects have found their way into museums, and conservators and heritage scientists are highly interested in assessing their preservation status, ideally without taking physical samples from the objects. Katherine Curran and her colleagues from the University College London (UCL) Institute for Sustainable Heritage, the University of Strathclyde, Glasgow, working in collaboration with several museums, libraries, and archives, now introduce a noninvasive gas-chromatography/mass-spectrometry detection system for marker VOCs emitted by several polymers contained in modern museum artifacts. They also developed a rough calibration system to classify three real objects from the Tate into two distinct decay states.

Every polymer leaves its own signature of degradation products. For example, degrading cellulose acetate emits acetic acid, which can be quantified over time. To assess the quality and quantity of VOCs from polymers, the scientists chose chemical markers for polymers common in museum artifacts such as cellulose-based polymers, polyurethane foam, poly(vinyl chloride), polystyrene, and polyethylene. As reference degradation states, they used modern polymeric samples exposed to heat for zero to 10 weeks. The aim was to find characteristic VOC patterns: "The VOCs detected provide an insight into the composition and ongoing chemical degradation processes of the objects studied," the authors remarked.

Based on the detected VOCs, a rough classification scheme as "early stage" and "advanced degradation state" could be established for the different polymers–and tested for real museum objects based on these materials. For two cellulose-based objects from the Tate made in the 1920s and 1930s, the scientists reported a low degradation state, but one made in 1923-1924 was found in a more advanced decay. While this might be a matter of concern for the conservators, Curran and her colleagues think of expanding their analysis: A calibration scheme based on naturally aged samples would help reduce the current limitations, they argue.

###

(3212 characters)

About the Author

Dr. Katherine Curran is a Lecturer in Sustainable Heritage at the UCL Institute for Sustainable Heritage at University College London, UK. Her research interests include the conservation of modern cultural heritage materials, polymer chemistry and degradation, and the analysis of VOC emissions from historic objects using advanced spectrometric and spectroscopic instrumentation.

https://www.ucl.ac.uk/bartlett/heritage/dr-katherine-curran

Media Contact

Mario Mueller
[email protected]

http://newsroom.wiley.com/

http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1521-3773/homepage/press/201808press.html

Related Journal Article

http://dx.doi.org/10.1002/anie.201712278

Comments