The research, led by Vijay Kumar Patidar of the Department of Aerospace Engineering at Graphic Era Deemed to Be University in Dehradun, India, together with Kumar Gaurav, Sudhir Joshi, D. Sahoo of KIIT and Dharmahinder Singh Chand of Chandigarh University, tackled the sonic-condition problem head-on. The team solved the steady, compressible Reynolds-Averaged Navier–Stokes equations using a pressure-based numerical solver, an approach well suited to capturing the strong pressure interactions, shock stands and boundary-layer behavior that dominate near-sonic flows around the biplane geometry. Their turbulence closure of choice builds on the Spalart–Allmaras one-equation model, a mainstay of external aerodynamics favored for its robustness in attached and mildly separated flows.

Flow choking in a Busemann biplane is fundamentally a compressibility problem of the ducted kind. As the freestream approaches sonic speed, air accelerating through the convergent portion of the channel between the two airfoil elements reaches Mach 1 at the throat before it can exit. A normal shock then forms upstream of the throat, and because flow through a shock is always subsonic-to-supersonic in the downstream direction, the shock propagates forward, thickens the boundary layers, and creates a cascade of separated flow and unsteady pressure loading. The result is a dramatic spike in wave drag and, in severe cases, a hysteresis effect in which the choked state persists even when conditions improve. Earlier mitigation strategies relied on reshaping the geometry itself—staggering the two elements fore and aft of one another, or modifying the throat area with flaps. The Indian team’s approach is different: rather than changing the shape, they change the flow.

The mechanism is known as momentum injection, a form of active flow control borrowed from the co-flow jet literature, where blowing air through slots on an airfoil surface has been shown to energize boundary layers and dramatically alter pressure distributions. In the present study, injection slots of fixed width were positioned at multiple chordwise locations within the passage between the biplane elements. Compressed air blown through these slots adds momentum directly to the low-energy fluid accumulating ahead of the throat, pushing the effective throat condition downstream and delaying or suppressing the shock-induced choking that otherwise dominates the flow field.

The parametric sweep was deliberately simple and systematic. Injection velocities ranging from 100 to 700 meters per second—spanning roughly subsonic jet speeds to flows approaching the local speed of sound—were tested at each slot location. The aerodynamic cost-benefit was quantified by comparing drag coefficients and flow structures against an uncontrolled baseline at the sonic flight condition. The pressure fields revealed the mechanism clearly: without control, pressure piled up in the convergent section of the channel, the signature of an incipient shock train. With injection, that pressure accumulation was visibly alleviated, the throat region was relieved, and the flow passed through the passage with far less disturbance.

The numbers are striking. The best configuration—a slot located at 0.05 chord, meaning very close to the leading edge of the biplane elements, combined with an injection velocity of 600 meters per second—produced a drag reduction of approximately 56 percent relative to the baseline choked case. That a slot placed almost at the nose of the airfoil proved optimal is physically intuitive in retrospect: the earliest possible injection gives the jet the maximum running length to mix with and energize the boundary layer before the fluid reaches the critical convergent section, spreading its momentum benefit across the entire passage rather than concentrating it too late.

Equally important is what happens when the injection is pushed too hard. Beyond the 600 meter per second optimum, performance degraded suddenly rather than gradually. The team identified this as a critical momentum threshold: above it, the injected jet itself begins to choke within the slot, and instead of relieving the channel blockage, the injection adds its own obstruction to an already congested flow. The message for designers is that momentum injection for choking mitigation is not a case of “more is better” but a tuned parameter with a well-defined optimum—one that future flight systems would need to meter precisely with onboard bleed-air supplies.

The significance of the work lies in the operational envelope it opens up. A supersonic transport built around Busemann-type geometry would cruise comfortably with near-cancelled shocks and a dramatically reduced sonic boom, but real aircraft must climb through, descend through, and maneuver within the transonic regime. Off-design performance at and near Mach 1 has been the persistent Achilles’ heel of the concept, and earlier studies from the same group explored stagger configurations, trailing-edge flaps, and injection at the off-design supersonic Mach number of 1.6. The new results extend active flow control to the hardest case of all: the sonic condition itself, where compressibility effects are at their most punishing and where the choked-flow penalty is most severe.

The broader context is a quiet renaissance in supersonic civil aviation research. NASA’s X-59 quiet supersonic technology demonstrator and renewed commercial interest in overland supersonic flight have reinvigorated the search for low-boom configurations, and the Busemann biplane remains one of the most theoretically elegant solutions on the table, having been studied for boomless supersonic transport concepts since the mid-2000s by groups in Japan and elsewhere. Variants with multiple wing elements, optimized planforms and twin-body fuselage integrations continue to appear in the literature. Each of these designs inherits the same transonic vulnerability, which is why a demonstrated 56 percent drag reduction at the sonic condition is more than a curiosity—it addresses the single most restrictive constraint on the concept’s practical operability.

There are, of course, caveats. The study is entirely computational, conducted in two dimensions on airfoil sections rather than three-dimensional wings, and steady-state RANS simulations with a one-equation turbulence model cannot fully capture the unsteady shock oscillations and broadband separation dynamics that characterize real choked flows. Implementing the injection system on a flight vehicle would require bleed air from the engines, internal ducting, and mass-flow budgets that subtract from propulsive efficiency—costs the aerodynamic drag numbers alone do not capture. The authors also note that the datasets used and analyzed in the study are available from the corresponding author on reasonable request, and the work received no specific external funding.

Even so, the study delivers something the field has lacked: a quantitative map of how slot location and injection velocity trade off against choking severity at the sonic condition, and a clear demonstration that a critical momentum threshold exists beyond which the cure becomes the disease. For a configuration conceived in 1935 to finally shed its transonic limitation not through geometric compromise but through active flow control is a fitting update to Busemann’s original vision. If supersonic flight is to return to the skies quietly, the humble biplane—now with jets of its own—may once again have a role to play.