The researchers prepared the material by freeze-drying and high-temperature carbonizing natural coconut to form a carbon nanofiber aerogel. They then grew CoNi alloy nanoparticles directly on the fiber surfaces through a hydrothermal process, producing what they designated C/CoNi-NA. According to the abstract, microscopy and related characterization showed that the nanoparticles were uniformly anchored to the fibers and that the aerogel’s three-dimensional porous structure remained intact. The authors associated this structure with the material’s compressive resilience and fatigue resistance, although the abstract does not provide quantitative mechanical-test results.

Electromagnetic characterization indicated that adding CoNi increased dielectric polarization and magnetic loss. The authors described the resulting combination as synergistic dielectric and magnetic losses. In the shielding analysis, total shielding effectiveness reached 24.5 dB, while absorption shielding effectiveness was substantially greater than reflection shielding effectiveness. The abstract therefore characterizes the measured shielding behavior as predominantly absorption-based. It also reports outstanding radar-cross-section reduction over a wide range of incident angles but does not state the tested angular range or numerical reduction values in the available text.

The findings support the authors’ conclusion that coconut-derived C/CoNi-NA is a promising lightweight, elastic material for broadband electromagnetic-wave absorption and electromagnetic-interference shielding. That conclusion remains bounded by the accessible evidence: this report is based on the journal article’s abstract rather than an assessment of the complete study. The preview does not disclose detailed testing conditions, uncertainty estimates, specimen counts, comparative material results, durability-cycle measurements or application-scale performance, so those aspects cannot be evaluated from the supplied abstract.

Subject of Research: Experimental evaluation of a coconut-derived C/CoNi nanofiber aerogel for electromagnetic absorption and shielding

Article Title: Biomass-derived elastic C/CoNi nanofiber aerogel with electromagnetic wave absorption and shielding properties

Article References: Zhou, G., Dong, H., Deng, H., Ma, C., Zhang, B., & Wang, Y. (2026). Biomass-derived elastic C/CoNi nanofiber aerogel with electromagnetic wave absorption and shielding properties. Journal of Materials Science, 61(42), 33084-33096. https://doi.org/10.1007/s10853-026-13761-1

Image Credits: AI Generated

DOI: 10.1007/s10853-026-13761-1

Keywords: C/CoNi aerogel, coconut carbon, nanofibers, electromagnetic absorption, electromagnetic shielding, reflection loss, radar cross section, CoNi nanoparticles, porous materials, Biomass-derived, elastic, CoNi

The new device, described in the journal Advanced Composites and Hybrid Materials, is called a multifunctional meta-absorber. It is built from two stacked functional layers, each with a carefully assigned job. The top layer is an infrared shielding layer, implemented as a frequency-selective surface, and its task is to suppress the thermal signature of whatever sits beneath it. The bottom layer is a radar absorption and microwave emissivity layer, a multilayer stacked structure that swallows incoming radar waves while radiating strongly in the microwave band. The elegance of the design lies in how these two layers divide the spectrum between them without interfering with each other’s work.

Start with the infrared problem. Every object warmer than absolute zero emits thermal radiation, and in the infrared atmospheric windows this emission is what thermal imagers detect. Metals are notoriously conspicuous in these bands because they behave almost like perfect infrared mirrors with very high effective emissivity contrast against natural backgrounds once heated. The researchers tackled this with their frequency-selective surface, which is engineered to present a low infrared emissivity of just 0.334. In practical terms, the surface emits only about a third of the thermal radiation that a conventional surface at the same temperature would, dramatically shrinking the thermal contrast that an infrared camera would register.

Crucially, that infrared shielding cannot come at the cost of blocking the layers below. Many materials that suppress infrared emission, such as continuous metallic films, also reflect or absorb microwaves, which would ruin the radar and radiometric performance of the underlying structure. The frequency-selective surface solves this by being spatially patterned rather than continuous: it behaves differently at different frequencies and for different propagation directions, remaining essentially transparent to microwaves while still delivering its low-emissivity thermal behavior. This frequency-selective transparency is what allows a single laminate to serve two masters at once, a constraint that has long limited multispectral camouflage designs.

The second layer carries the microwave burden, and it does so through a mechanism as old as electrical engineering itself: ohmic loss. When an electromagnetic wave enters a lossy conductor, the induced currents dissipate its energy as heat rather than allowing it to reflect back toward the source. By stacking multiple layers with tuned properties, the team created a structure that achieves broadband absorption exceeding 90 percent across the range from 4.62 to 28.29 gigahertz. That span covers much of the radar spectrum used for detection and tracking, from lower-frequency surveillance bands through the higher frequencies favored by modern fire-control and imaging radars.

Broadband absorption translates directly into a smaller radar cross section, the measure of how visible a target is to radar. In their experiments, the meta-absorber achieved a 10 dB reduction in radar cross section across the band from 4.38 to 21.18 gigahertz. A 10 dB reduction means the returning echo carries only one-tenth of the power it otherwise would, which can shrink the detection range a radar achieves against the target by a substantial margin. The researchers also report that the structure maintains its performance over wide angles of incidence and is insensitive to polarization, meaning it cannot be defeated simply by illuminating the target from an oblique angle or with a differently oriented antenna.

The most conceptually interesting part of the work addresses microwave radiometric detection, a passive technique that is increasingly being folded into integrated sensor suites. Unlike radar, a radiometer emits nothing; it simply listens, measuring the microwave brightness temperature of the scene. Kirchhoff’s law of thermal radiation ties together absorption and emission: a body that absorbs strongly at a given frequency must also emit strongly there. Metals, being poor emitters at microwave frequencies, appear cold against the warm microwave background of the natural environment, and that cold spot betrays them to a radiometer even when their radar echo has been suppressed.

Here the meta-absorber turns an apparent conflict into an advantage. Because the radar-absorbing layer is designed to absorb more than 90 percent of incident microwave radiation, Kirchhoff’s law dictates that it also emits strongly in the same band. Instead of appearing as a cold metallic anomaly, the coated target radiates at a brightness temperature close to that of its surroundings, blending into the radiometric background. The team quantified this effect: the average brightness temperature contrast between a metallic target and its background fell by 40.33 percent when the meta-absorber was applied. In other words, the very loss mechanism that hides the target from radar simultaneously camouflages it from passive microwave sensors, resolving a trade-off that has plagued earlier single-purpose designs.

Taken together, the reported properties form an unusually complete camouflage package: low infrared emissivity, high microwave absorptivity, high microwave emissivity, wide-angle stability, and polarization insensitivity, all in a layered structure that can be fabricated and tested experimentally rather than existing only in simulation. The authors argue that this combination offers a viable route to protecting high-value ground targets against the integrated, multispectral detection systems that are becoming the norm rather than the exception. The work was supported by the National Natural Science Foundation of China, the Natural Science Foundation of Hunan Province, and the Fundamental Research Funds for the Central Universities of Central South University.

The broader significance of the study lies in its systems-level thinking. Stealth research has historically optimized one spectral channel at a time, often leaving targets exposed to whichever sensor the designer ignored. As detection platforms fuse infrared imaging, active radar, and passive radiometry into a single kill chain, camouflage must become equally multispectral, and the physics of that task is unforgiving because absorption, emission, and reflection are bound together by thermodynamic law. By exploiting those very laws, using a frequency-selective surface to decouple infrared from microwave behavior and ohmic loss to couple radar absorption to radiometric emission, the Central South University team has shown that the constraints can be turned into design tools. If such meta-absorbers can be manufactured at scale, on flexible substrates, and with the durability that fielded equipment demands, the era of hiding in plain sight across the entire spectrum may be moving from theory toward hardware.

Subject of Research: Multispectral camouflage metamaterials that counter infrared, radar, and microwave radiometric detection

Article Title: Multifunctional meta-absorber for multispectral camouflage against infrared, radar, and microwave radiometric detection

Article References: Wu, R., Dong, J., Xiao, C., Wang, M., & Luo, H. (2026). Multifunctional meta-absorber for multispectral camouflage against infrared, radar, and microwave radiometric detection. Advanced Composites and Hybrid Materials. https://doi.org/10.1007/s42114-026-02108-8

Image Credits: AI Generated

DOI: 10.1007/s42114-026-02108-8

Keywords: meta-absorber, metamaterials, multispectral camouflage, infrared emissivity, radar cross section, microwave radiometry, brightness temperature, frequency-selective surface, ohmic loss, stealth materials, Kirchhoff's law, electromagnetic absorption