The choice of CuCo2O4 is grounded in solid electrochemical logic. As a binary transition metal oxide with a cubic spinel architecture, it hosts copper and cobalt cations on distinct lattice sites, each capable of switching between multiple oxidation states, Cu2+/Cu+ and Co3+/Co2+, during reversible Faradaic redox reactions. This rich redox chemistry underpins pseudocapacitance, the mechanism by which charge is stored through fast surface reactions rather than slow bulk diffusion. Compared with conventional cobalt oxides such as Co3O4, CuCo2O4 offers better electronic conductivity, and copper is both cheaper and less toxic than cobalt, an important consideration for any technology hoping to scale up. Yet pristine CuCo2O4 has well-known weaknesses: low surface area, a tendency for nanoparticles to clump together, sluggish ion diffusion through dense structures, and mechanical degradation as the material swells and shrinks during cycling.

The team’s solution was to marry the oxide to a porous carbon scaffold made from agricultural waste. Coconut shells were washed, dried, crushed, and carbonized at 900 degrees Celsius for four hours, yielding an activated carbon powder rich in micropores and mesopores and decorated with oxygen-containing functional groups that bond readily with metal oxide surfaces. The CuCo2O4 itself was synthesized through a sol-gel combustion route, with copper chloride and cobalt precursors chelated by citric acid, gelled, dried, and calcined at 600 degrees Celsius. The final composite was made by physically grinding equal weights of oxide and carbon in an agate mortar, a deliberately simple and low-cost procedure that could easily translate to industrial production.

Structural analysis confirmed the strategy worked at the nanoscale. X-ray diffraction showed sharp, high-intensity peaks matching the cubic spinel phase of CuCo2O4, with only a trace of CuO as a secondary impurity. When the activated carbon was added, the diffraction peaks broadened and weakened, and the average crystallite size shrank from 43.89 nanometers to 33.79 nanometers. That shrinkage matters: the disordered carbon framework physically restrains particle growth and aggregation during synthesis, leaving more electrochemically active sites exposed to the electrolyte. A broad reflection between 20 and 30 degrees in the composite pattern confirmed the amorphous, graphitic character of the biomass-derived carbon dispersed among the spinel nanocrystals.

The most striking transformation appeared in the surface chemistry. Nitrogen physisorption measurements revealed that pristine CuCo2O4 has a modest BET surface area of roughly 20 square meters per gram, with mesopores averaging 25.1 nanometers wide. The composite, by contrast, exploded to 562 square meters per gram, with an average pore width of just 1.9 nanometers and a Type I isotherm characteristic of microporous materials. In practical terms, the carbon scaffold multiplies the electrode’s ion-accessible real estate by a factor of nearly thirty, creating an interconnected network through which electrolyte ions can race rather than crawl. Infrared spectroscopy added further evidence of intimate coupling, showing new carbon-oxygen and aromatic carbon-carbon bands alongside the characteristic Co-O and Cu-O vibrations of the spinel framework.

Electrochemical testing in a three-electrode cell with 3 M potassium hydroxide electrolyte translated these structural gains into performance. Cyclic voltammetry showed broad redox peaks for both materials, but the composite enclosed a far larger current area, delivering 562.5 farads per gram at 5 millivolts per second, a 96 percent jump over the pristine oxide’s 287.5 farads per gram. Galvanostatic charge-discharge measurements were even more emphatic: at a current density of 1 ampere per gram, the composite achieved a specific capacitance of 643.75 farads per gram, against 389.06 farads per gram for CuCo2O4 alone. Even when the current was pushed fivefold to 5 amperes per gram, the composite retained 507.81 farads per gram, demonstrating the rate capability that fast-charging applications demand.

Perhaps the most revealing analysis came from Dunn’s method, which separates surface-dominated capacitive storage from diffusion-limited storage. For pristine CuCo2O4, capacitive contributions ranged from just 11 to 33 percent across the tested scan rates, meaning most of its charge was locked behind slow diffusion. The composite flipped that picture entirely, with capacitive contributions of 55 to 82 percent, confirming that the activated carbon network shifts the electrode toward fast, surface-controlled charge storage. Impedance spectroscopy reinforced the point: solution resistance fell from 8.21 ohms to 4.66 ohms, and charge-transfer resistance collapsed from 2725.45 ohms to 627.87 ohms, reflecting the porous carbon’s role in opening ion pathways and improving electron transport.

Energy and power metrics tell a similarly compelling story. The composite delivered 205.76 watt-hours per kilogram at a power density of 1797.90 watts per kilogram, and still held 162.24 watt-hours per kilogram at 8985.6 watts per kilogram. The pristine oxide managed only 124.5 watt-hours per kilogram initially and lost 42 percent of that at high power. Durability testing at 5 amperes per gram showed the composite retaining 90 percent of its capacitance after 5000 cycles, comfortably ahead of the pure oxide’s 82.5 percent. The authors attribute this resilience to the carbon matrix buffering the mechanical stresses of oxide expansion and contraction, while noting that energy densities calculated from three-electrode tests may not directly translate to full device performance.

What makes this work resonate beyond the laboratory is its sustainability angle. Coconut shells are an abundant, low-cost biomass residue across tropical regions, with high carbon yield and minimal inorganic contamination, making them an ideal feedstock for electrode-grade activated carbon. By pairing waste-derived carbon with a mixed metal oxide whose redox-active cations span multiple oxidation states, the study demonstrates that high-performance energy storage need not depend on exotic or expensive materials. Compared with a previously reported CuCo2O4/reduced graphene oxide electrode that achieved 291 farads per gram, the coconut-shell composite more than doubles that figure while sustaining 90 percent retention over five times as many cycles. As grid buffering, regenerative braking, and portable electronics all demand faster, tougher, and greener storage, this trash-to-treasure electrode offers a template worth watching.

Subject of Research: CuCo2O4/activated carbon composite electrodes for supercapacitor energy storage

Article Title: Enhanced electrochemical performance of CuCo2O4 and CuCo2O4/activated carbon composites for supercapacitor applications

Article References: Franklin, J. B., Venkatesan, J., Paul, J. F. J., Harini, S., Fathima, J. P. R., Sundaram, S. J., & Kaviyarasu, K. (2026). Enhanced electrochemical performance of CuCo2O4 and CuCo2O4/activated carbon composites for supercapacitor applications. Discover Electrochemistry, 3(1), Article 56. https://doi.org/10.1007/s44373-026-00143-0

Image Credits: AI Generated

DOI: 10.1007/s44373-026-00143-0

Keywords: supercapacitors, CuCo2O4, activated carbon, coconut shells, pseudocapacitance, spinel oxide, energy storage, biomass-derived carbon, electrode materials, specific capacitance, electrochemical impedance, sustainable materials