Harnessing hopping hydrogens for high-efficiency OLEDs
Renewed investigation of a molecule that was originally synthesized with the goal of creating a unique light-absorbing pigment has led to the establishment of a novel design strategy for efficient light-emitting molecules with applications in next-generation displays and lighting.
Researchers at Kyushu University's Center for Organic Photonics and Electronics Research (OPERA) demonstrated that a molecule that slightly changes its chemical structure before and after emission can achieve a high efficiency in organic light-emitting diodes (OLEDs).
In addition to producing vibrant colors, OLEDs can be fabricated into everything from tiny pixels to large and flexible panels, making them extremely attractive for displays and lighting.
In an OLED, electrical charges injected into thin films of organic molecules come together to form packets of energy – called excitons – that can produce light emission.
The goal is to convert all of the excitons to light, but three-fourths of the created excitons are triplets, which do not produce light in conventional materials, while the remaining one-fourth are singlets, which emit through a process called fluorescence.
Inclusion of a rare metal, such as iridium or platinum, in a molecule can enable rapid emission from the triplets through phosphorescence, which is currently the dominant technology for highly efficient OLEDs.
An alternative mechanism is the use of heat in the environment to give triplets an energetic boost that is sufficient to convert them into light-emitting singlets.
This process, known as thermally activated delayed fluorescence (TADF), easily occurs at room temperature in appropriately designed molecules and has the added advantage of avoiding the cost and reduced molecular design freedom associated with rare metals.
However, most TADF molecules still rely on the same basic design approach.
"Many new TADF molecules are being reported each month, but we keep seeing the same underlying design with electron-donating groups connected to electron-accepting groups," says Masashi Mamada, lead researcher on the study reporting the new results.
"Finding fundamentally different molecular designs that also exhibit efficient TADF is a key to unlocking new properties, and in this case, we found one by looking at the past with a new perspective."
Currently, combinations of donating and accepting units are primarily used because they provide a relatively simple way to push around the electrons in a molecule and obtain the conditions needed for TADF.
Although the method is effective and a huge variety of combinations is possible, new strategies are still desired in the quest to find perfect or unique emitters.
The mechanism explored by the researchers this time involves the reversible transfer of a hydrogen atom – technically, just its positive nucleus – from one atom in the emitting molecule to another in the same molecule to create an arrangement conducive to TADF.
This transfer occurs spontaneously when the molecule is excited with optical or electrical energy and is known as excited-state intramolecular proton transfer (ESIPT).
This ESIPT process is so important in the investigated molecules that quantum chemical calculations by the researchers indicate that TADF is not possible before transfer of the hydrogen.
After excitation, the hydrogen rapidly transfers to a different atom in the molecule, leading to a molecular structure capable of TADF.
The hydrogen transfers back to its initial atom after the molecule emits light, and the molecule is then ready to repeat the process.
Although TADF from an ESIPT molecule has been reported previously, this is the first demonstration of highly efficient TADF observed inside and outside of a device.
This vastly different design strategy opens the door for achieving TADF with a variety of new chemical structures that would not have been considered based on previous strategies.
Interestingly, the molecule the researchers used was most likely a disappointment when first synthesized nearly 20 years ago by chemists hoping to create a new pigment only to discover that the molecule is colorless.
"Organic molecules never cease to amaze me," says Professor Chihaya Adachi, Director of OPERA. "Many paths with different advantages and disadvantages exist for achieving the same goal, and we have still only scratched the surface of what is possible."
The advantages of this design strategy are just beginning to be explored, but one particularly promising area is related to stability.
Molecules similar to the investigated one are known to be highly resistant to degradation, so researchers hope that these kinds of molecules might help to improve the lifetime of OLEDs.
To see if this is the case, tests are now underway.
While only time will tell how far this particular strategy will go, the continually growing options for OLED emitters certainly bode well for their future.
For more information about this research, see "Highly efficient thermally activated delayed fluorescence from an excited-state intramolecular proton transfer system," Masashi Mamada et al., ACS Central Science (2017), DOI: 10.1021/acscentsci.7b00183.
This research was performed as a part of the Adachi Molecular Exciton Engineering Project funded by the Exploratory Research for Advanced Technology (ERATO) program of the Japan Science and Technology Agency (JST) under JST ERATO Grant Number JPMJER1305, Japan.
William J. Potscavage, Jr.
Related Journal Article