Greener, faster and cheaper way to make patterned metals for solar cells and electronics

IMAGE

Credit: University of Warwick

  • Patterning metals for electronics and solar cells can be slow, expensive and involve toxic chemicals
  • Scientists from the Department of Chemistry at the University of Warwick have developed a way to make patterned films of silver and copper (the two most conductive metals) using cheap organofluorine compounds and without using toxic chemicals.
  • This method is more sustainable and potentially much cheaper because it uses an extremely thin printed layer of organofluorine to prevent metal deposition, so metal is only deposited where it is needed.
  • It can be used to make electrodes for flexible solar panels, next generation sensors and low-emissivity glass

An innovative way to pattern metals has been discovered by scientists in the Department of Chemistry at the University of Warwick, which could make the next generation of solar panels more sustainable and cheaper.

Silver and copper are the most widely used electrical conductors in modern electronics and solar cells. However, conventional methods of patterning these metals to make the desired pattern of conducting lines are based on selectively removing metal from a film by etching using harmful chemicals or printing from costly metal inks.

Scientists from the Department of Chemistry at the University of Warwick, have developed a way of patterning these metals that is likely to prove much more sustainable and cheaper for large scale production, because there is no metal waste or use of toxic chemicals, and the fabrication method is compatible with continuous roll-to-roll processing.

The work is reported in the paper ‘Selective deposition of silver and copper films by condensation coefficient modulation’ published as an advanced article on 13th August in the journal Materials Horizons.

Thanks to £1.15 M funding from the UK Engineering and Physical Sciences Research Council, Dr Ross Hatton and Dr Silvia Varagnolo have discovered that silver and copper do not condense onto extremely thin films of certain highly fluorinated organic compounds when the metal is deposited by simple thermal evaporation.

Thermal evaporation is already widely used on a large scale to make the thin metal film on the inside of crisp packets, and organofluorine compounds are already common place as the basis of non-stick cooking pans.

The researchers have shown that the organofluorine layer need only be 10 billionths of a metre thick to be effective, and so only tiny amounts are needed.

This unconventional approach also leaves the metal surface uncontaminated, which Hatton believes will be particularly important for the next generation sensors, which often require uncontaminated patterned films of these metals as platforms onto which sensing molecules can be attached.

To help address the challenges posed by climate change, there is a need for colour tuneable, flexible and light weight solar cells that can be produced at low cost, particularly for applications where conventional rigid silicon solar cells are unsuitable such as in electric cars and semi-transparent solar cells for buildings.

Solar cells based on thin films of organic, perovskite or nano-crystal semiconductors all have potential to meet this need, although they all require a low cost, flexible transparent electrode. Hatton and his team have used their method to fabricate semi-transparent organic solar cells in which the top silver electrode is patterned with millions of tiny apertures per square centimetre, which cannot be achieved by any other scalable means directly on top of an organic electronic device.

Dr Hatton from the Department of Chemistry at the University of Warwick comments:

“This innovation enables us to realise the dream of truly flexible, transparent electrodes matched to needs of the emerging generation of thin film solar cells, as well as having numerous other potential applications ranging from sensors to low-emissivity glass.”

###

NOTES TO EDITORS:

Paper available to view at: https://pubs.rsc.org/en/content/articlelanding/2019/mh/c9mh00842j#!divAbstract

High-res images available credit to The University of Warwick at:

https://warwick.ac.uk/services/communications/medialibrary/images/august2019/chem_15.jpg

Caption: All three researchers from left to right: Dr Ross Hatton, Dr Silva Varagnolo and Dr Jaemin Lee

https://warwick.ac.uk/services/communications/medialibrary/images/august2019/chem_21.jpg

Caption: All three researchers from left to right: Dr Ross Hatton, Dr Silva Varagnolo and Dr Jaemin Lee

https://warwick.ac.uk/services/communications/medialibrary/images/august2019/chem_03.jpg

Caption: An example of a patterned metal made using the new technique

https://warwick.ac.uk/services/communications/medialibrary/images/august2019/chem_05.jpg

Caption: Dr Ross Hatton examining the pattern

https://warwick.ac.uk/services/communications/medialibrary/images/august2019/chem_11.jpg

Caption: Dr Silva Varagnolo examining the pattern

For further information please contact:

Alice Scott

Media Relations Manager – Science

University of Warwick

E-mail: alice.j.scott@warwick.ac.uk

Tel: +44 (0) 2476 574 255 or +44 (0) 7920 531 221

Media Contact
Alice Scott
alice.j.scott@warwick.ac.uk

Original Source

https://warwick.ac.uk/newsandevents/pressreleases/greener_faster_and

Related Journal Article

http://dx.doi.org/10.1039/C9MH00842J

Comments